arch/arm/boot/dts/kirkwood-6282.dtsi

   1 / {
   2         mbus@f1000000 {
   3                 pciec: pcie@82000000 {
   4                         compatible = "marvell,kirkwood-pcie";
   5                         status = "disabled";
   6                         device_type = "pci";
   7
   8                         #address-cells = <3>;
   9                         #size-cells = <2>;
  10
  11                         bus-range = <0x00 0xff>;
  12
  13                         ranges =
  14                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  15                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
  16                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
  17                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  18                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
  19                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
  20                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
  21
  22                         pcie0: pcie@1,0 {
  23                                 device_type = "pci";
  24                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  25                                 reg = <0x0800 0 0 0 0>;
  26                                 #address-cells = <3>;
  27                                 #size-cells = <2>;
  28                                 #interrupt-cells = <1>;
  29                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  30                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  31                                 bus-range = <0x00 0xff>;
  32                                 interrupt-map-mask = <0 0 0 0>;
  33                                 interrupt-map = <0 0 0 0 &intc 9>;
  34                                 marvell,pcie-port = <0>;
  35                                 marvell,pcie-lane = <0>;
  36                                 clocks = <&gate_clk 2>;
  37                                 status = "disabled";
  38                         };
  39
  40                         pcie1: pcie@2,0 {
  41                                 device_type = "pci";
  42                                 assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
  43                                 reg = <0x1000 0 0 0 0>;
  44                                 #address-cells = <3>;
  45                                 #size-cells = <2>;
  46                                 #interrupt-cells = <1>;
  47                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
  48                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
  49                                 bus-range = <0x00 0xff>;
  50                                 interrupt-map-mask = <0 0 0 0>;
  51                                 interrupt-map = <0 0 0 0 &intc 10>;
  52                                 marvell,pcie-port = <1>;
  53                                 marvell,pcie-lane = <0>;
  54                                 clocks = <&gate_clk 18>;
  55                                 status = "disabled";
  56                         };
  57                 };
  58         };
  59         ocp@f1000000 {
  60
  61                 pinctrl: pin-controller@10000 {
  62                         compatible = "marvell,88f6282-pinctrl";
  63
  64                         pmx_sata0: pmx-sata0 {
  65                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  66                                 marvell,function = "sata0";
  67                         };
  68                         pmx_sata1: pmx-sata1 {
  69                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  70                                 marvell,function = "sata1";
  71                         };
  72
  73                         /*
  74                          * Default I2C1 pinctrl setting on mpp36/mpp37,
  75                          * overwrite marvell,pins on board level if required.
  76                          */
  77                         pmx_twsi1: pmx-twsi1 {
  78                                 marvell,pins = "mpp36", "mpp37";
  79                                 marvell,function = "twsi1";
  80                         };
  81
  82                         pmx_sdio: pmx-sdio {
  83                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  84                                                "mpp15", "mpp16", "mpp17";
  85                                 marvell,function = "sdio";
  86                         };
  87                 };
  88
  89                 thermal: thermal@10078 {
  90                         compatible = "marvell,kirkwood-thermal";
  91                         reg = <0x10078 0x4>;
  92                         status = "okay";
  93                 };
  94
  95                 rtc: rtc@10300 {
  96                         compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
  97                         reg = <0x10300 0x20>;
  98                         interrupts = <53>;
  99                         clocks = <&gate_clk 7>;
 100                 };
 101
 102                 i2c1: i2c@11100 {
 103                         compatible = "marvell,mv64xxx-i2c";
 104                         reg = <0x11100 0x20>;
 105                         #address-cells = <1>;
 106                         #size-cells = <0>;
 107                         interrupts = <32>;
 108                         clock-frequency = <100000>;
 109                         clocks = <&gate_clk 7>;
 110                         pinctrl-0 = <&pmx_twsi1>;
 111                         pinctrl-names = "default";
 112                         status = "disabled";
 113                 };
 114
 115                 sata: sata@80000 {
 116                         compatible = "marvell,orion-sata";
 117                         reg = <0x80000 0x5000>;
 118                         interrupts = <21>;
 119                         clocks = <&gate_clk 14>, <&gate_clk 15>;
 120                         clock-names = "0", "1";
 121                         phys = <&sata_phy0>, <&sata_phy1>;
 122                         phy-names = "port0", "port1";
 123                         status = "disabled";
 124                 };
 125
 126                 sdio: mvsdio@90000 {
 127                         compatible = "marvell,orion-sdio";
 128                         reg = <0x90000 0x200>;
 129                         interrupts = <28>;
 130                         clocks = <&gate_clk 4>;
 131                         pinctrl-0 = <&pmx_sdio>;
 132                         pinctrl-names = "default";
 133                         bus-width = <4>;
 134                         cap-sdio-irq;
 135                         cap-sd-highspeed;
 136                         cap-mmc-highspeed;
 137                         status = "disabled";
 138                 };
 139         };
 140 };