arch/arm/boot/dts/kirkwood-98dx4122.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         mbus@f1000000 {
   4                 pciec: pcie@82000000 {
   5                         compatible = "marvell,kirkwood-pcie";
   6                         status = "disabled";
   7                         device_type = "pci";
   8
   9                         #address-cells = <3>;
  10                         #size-cells = <2>;
  11
  12                         bus-range = <0x00 0xff>;
  13
  14                         ranges =
  15                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  16                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  17                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
  18
  19                         pcie0: pcie@1,0 {
  20                                 device_type = "pci";
  21                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  22                                 reg = <0x0800 0 0 0 0>;
  23                                 #address-cells = <3>;
  24                                 #size-cells = <2>;
  25                                 #interrupt-cells = <1>;
  26                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  27                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  28                                 bus-range = <0x00 0xff>;
  29                                 interrupt-map-mask = <0 0 0 0>;
  30                                 interrupt-map = <0 0 0 0 &intc 9>;
  31                                 marvell,pcie-port = <0>;
  32                                 marvell,pcie-lane = <0>;
  33                                 clocks = <&gate_clk 2>;
  34                                 status = "disabled";
  35                         };
  36                 };
  37         };
  38
  39         ocp@f1000000 {
  40                 pinctrl: pin-controller@10000 {
  41                         compatible = "marvell,98dx4122-pinctrl";
  42
  43                 };
  44         };
  45 };
  46
  47 &sata_phy0 {
  48         status = "disabled";
  49 };
  50
  51 &sata_phy1 {
  52         status = "disabled";
  53 };