arch/arm/boot/dts/kirkwood-cloudbox.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "LaCie CloudBox";
   8         compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x10000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8";
  17                 stdout-path = &uart0;
  18         };
  19
  20         ocp@f1000000 {
  21                 pinctrl: pin-controller@10000 {
  22                         pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
  23                                 marvell,pins = "mpp15";
  24                                 marvell,function = "sata0";
  25                         };
  26                 };
  27
  28                 serial@12000 {
  29                         status = "okay";
  30                 };
  31
  32                 sata@80000 {
  33                         pinctrl-0 = <&pmx_cloudbox_sata0>;
  34                         pinctrl-names = "default";
  35                         status = "okay";
  36                         nr-ports = <1>;
  37                 };
  38
  39                 spi@10600 {
  40                         status = "okay";
  41
  42                         flash@0 {
  43                                 #address-cells = <1>;
  44                                 #size-cells = <1>;
  45                                 compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
  46                                 reg = <0>;
  47                                 spi-max-frequency = <20000000>;
  48                                 mode = <0>;
  49
  50                                 partition@0 {
  51                                         reg = <0x0 0x80000>;
  52                                         label = "u-boot";
  53                                 };
  54                         };
  55                 };
  56         };
  57
  58         gpio_keys {
  59                 compatible = "gpio-keys";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62
  63                 button@1 {
  64                         label = "Power push button";
  65                         linux,code = <KEY_POWER>;
  66                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69
  70         gpio-leds {
  71                 compatible = "gpio-leds";
  72
  73                 red-fail {
  74                         label = "cloudbox:red:fail";
  75                         gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
  76                 };
  77                 blue-sata {
  78                         label = "cloudbox:blue:sata";
  79                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
  80                 };
  81         };
  82
  83         gpio_poweroff {
  84                 compatible = "gpio-poweroff";
  85                 gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
  86         };
  87 };
  88
  89 &mdio {
  90         status = "okay";
  91
  92         ethphy0: ethernet-phy@0 {
  93                 reg = <0>;
  94         };
  95 };
  96
  97 &eth0 {
  98         status = "okay";
  99         ethernet0-port@0 {
 100                 phy-handle = <&ethphy0>;
 101         };
 102 };