arch/arm/boot/dts/kirkwood-dns320.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood-dnskw.dtsi"
   4
   5 / {
   6         model = "D-Link DNS-320 NAS (Rev A1)";
   7         compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   8
   9         memory {
  10                 device_type = "memory";
  11                 reg = <0x00000000 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20                 pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
  21                              &pmx_led_red_left_hdd &pmx_led_red_right_hdd
  22                              &pmx_led_white_usb>;
  23                 pinctrl-names = "default";
  24
  25                 blue-power {
  26                         label = "dns320:blue:power";
  27                         gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
  28                         default-state = "keep";
  29                 };
  30                 blue-usb {
  31                         label = "dns320:blue:usb";
  32                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  33                 };
  34                 orange-l_hdd {
  35                         label = "dns320:orange:l_hdd";
  36                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  37                 };
  38                 orange-r_hdd {
  39                         label = "dns320:orange:r_hdd";
  40                         gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
  41                 };
  42                 orange-usb {
  43                         label = "dns320:orange:usb";
  44                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
  45                 };
  46         };
  47
  48         ocp@f1000000 {
  49                 serial@12000 {
  50                         status = "okay";
  51                 };
  52
  53                 serial@12100 {
  54                         pinctrl-0 = <&pmx_uart1>;
  55                         pinctrl-names = "default";
  56                         status = "okay";
  57                 };
  58         };
  59 };