arch/arm/boot/dts/kirkwood-dreamplug.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "Globalscale Technologies Dreamplug";
   8         compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x20000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  17                 stdout-path = &uart0;
  18         };
  19
  20         ocp@f1000000 {
  21                 pinctrl: pin-controller@10000 {
  22                         pmx_led_bluetooth: pmx-led-bluetooth {
  23                                 marvell,pins = "mpp47";
  24                                 marvell,function = "gpio";
  25                         };
  26                         pmx_led_wifi: pmx-led-wifi {
  27                                 marvell,pins = "mpp48";
  28                                 marvell,function = "gpio";
  29                         };
  30                         pmx_led_wifi_ap: pmx-led-wifi-ap {
  31                                 marvell,pins = "mpp49";
  32                                 marvell,function = "gpio";
  33                         };
  34                 };
  35                 serial@12000 {
  36                         status = "ok";
  37                 };
  38
  39                 spi@10600 {
  40                         status = "okay";
  41
  42                         m25p40@0 {
  43                                 #address-cells = <1>;
  44                                 #size-cells = <1>;
  45                                 compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
  46                                 reg = <0>;
  47                                 spi-max-frequency = <50000000>;
  48                                 mode = <0>;
  49
  50                                 partition@0 {
  51                                         reg = <0x0 0x80000>;
  52                                         label = "u-boot";
  53                                 };
  54
  55                                 partition@100000 {
  56                                         reg = <0x100000 0x10000>;
  57                                         label = "u-boot env";
  58                                 };
  59
  60                                 partition@180000 {
  61                                         reg = <0x180000 0x10000>;
  62                                         label = "dtb";
  63                                 };
  64                         };
  65                 };
  66
  67                 sata@80000 {
  68                         status = "okay";
  69                         nr-ports = <1>;
  70                 };
  71
  72                 mvsdio@90000 {
  73                         pinctrl-0 = <&pmx_sdio>;
  74                         pinctrl-names = "default";
  75                         status = "okay";
  76                         /* No CD or WP GPIOs */
  77                         broken-cd;
  78                 };
  79         };
  80
  81         gpio-leds {
  82                 compatible = "gpio-leds";
  83                 pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
  84                              &pmx_led_wifi_ap >;
  85                 pinctrl-names = "default";
  86
  87                 bluetooth {
  88                         label = "dreamplug:blue:bluetooth";
  89                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  90                 };
  91                 wifi {
  92                         label = "dreamplug:green:wifi";
  93                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  94                 };
  95                 wifi-ap {
  96                         label = "dreamplug:green:wifi_ap";
  97                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  98                 };
  99         };
 100 };
 101
 102 &mdio {
 103         status = "okay";
 104
 105         ethphy0: ethernet-phy@0 {
 106                 reg = <0>;
 107         };
 108
 109         ethphy1: ethernet-phy@1 {
 110                 reg = <1>;
 111         };
 112 };
 113
 114 &eth0 {
 115         status = "okay";
 116         ethernet0-port@0 {
 117                 phy-handle = <&ethphy0>;
 118         };
 119 };
 120
 121 &eth1 {
 122         status = "okay";
 123         ethernet1-port@0 {
 124                 phy-handle = <&ethphy1>;
 125         };
 126 };