arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "Globalscale Technologies Guruplug Server Plus";
   8         compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x20000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  17                 stdout-path = &uart0;
  18         };
  19
  20         ocp@f1000000 {
  21                 pinctrl: pin-controller@10000 {
  22                         pmx_led_health_r: pmx-led-health-r {
  23                                 marvell,pins = "mpp46";
  24                                 marvell,function = "gpio";
  25                         };
  26                         pmx_led_health_g: pmx-led-health-g {
  27                                 marvell,pins = "mpp47";
  28                                 marvell,function = "gpio";
  29                         };
  30                         pmx_led_wmode_r: pmx-led-wmode-r {
  31                                 marvell,pins = "mpp48";
  32                                 marvell,function = "gpio";
  33                         };
  34                         pmx_led_wmode_g: pmx-led-wmode-g {
  35                                 marvell,pins = "mpp49";
  36                                 marvell,function = "gpio";
  37                         };
  38                 };
  39                 serial@12000 {
  40                         status = "ok";
  41                 };
  42
  43                 sata@80000 {
  44                         status = "okay";
  45                         nr-ports = <1>;
  46                 };
  47
  48                 /* AzureWave AW-GH381 WiFi/BT */
  49                 mvsdio@90000 {
  50                         status = "okay";
  51                         non-removable;
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57                 pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
  58                               &pmx_led_wmode_r &pmx_led_wmode_g >;
  59                 pinctrl-names = "default";
  60
  61                 health-r {
  62                         label = "guruplug:red:health";
  63                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  64                 };
  65                 health-g {
  66                         label = "guruplug:green:health";
  67                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  68                 };
  69                 wmode-r {
  70                         label = "guruplug:red:wmode";
  71                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  72                 };
  73                 wmode-g {
  74                         label = "guruplug:green:wmode";
  75                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  76                 };
  77         };
  78 };
  79
  80 &nand {
  81         status = "okay";
  82
  83         partition@0 {
  84                 label = "u-boot";
  85                 reg = <0x00000000 0x00100000>;
  86                 read-only;
  87         };
  88
  89         partition@100000 {
  90                 label = "uImage";
  91                 reg = <0x00100000 0x00400000>;
  92         };
  93
  94         partition@500000 {
  95                 label = "data";
  96                 reg = <0x00500000 0x1fb00000>;
  97         };
  98 };
  99
 100 &mdio {
 101         status = "okay";
 102
 103         ethphy0: ethernet-phy@0 {
 104                 /* Marvell 88E1121R */
 105                 compatible = "ethernet-phy-id0141.0cb0",
 106                              "ethernet-phy-ieee802.3-c22";
 107                 reg = <0>;
 108         };
 109
 110         ethphy1: ethernet-phy@1 {
 111                 /* Marvell 88E1121R */
 112                 compatible = "ethernet-phy-id0141.0cb0",
 113                              "ethernet-phy-ieee802.3-c22";
 114                 reg = <1>;
 115         };
 116 };
 117
 118 &eth0 {
 119         status = "okay";
 120         ethernet0-port@0 {
 121                 phy-handle = <&ethphy0>;
 122                 phy-connection-type = "rgmii-id";
 123         };
 124 };
 125
 126 &eth1 {
 127         status = "okay";
 128         ethernet1-port@0 {
 129                 phy-handle = <&ethphy1>;
 130                 phy-connection-type = "rgmii-id";
 131         };
 132 };