arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "Globalscale Technologies Guruplug Server Plus";
   8         compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x20000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  17         };
  18
  19         ocp@f1000000 {
  20                 pinctrl: pinctrl@10000 {
  21                         pmx_led_health_r: pmx-led-health-r {
  22                                 marvell,pins = "mpp46";
  23                                 marvell,function = "gpio";
  24                         };
  25                         pmx_led_health_g: pmx-led-health-g {
  26                                 marvell,pins = "mpp47";
  27                                 marvell,function = "gpio";
  28                         };
  29                         pmx_led_wmode_r: pmx-led-wmode-r {
  30                                 marvell,pins = "mpp48";
  31                                 marvell,function = "gpio";
  32                         };
  33                         pmx_led_wmode_g: pmx-led-wmode-g {
  34                                 marvell,pins = "mpp49";
  35                                 marvell,function = "gpio";
  36                         };
  37                 };
  38                 serial@12000 {
  39                         clock-frequency = <200000000>;
  40                         status = "ok";
  41                 };
  42
  43                 nand@3000000 {
  44                         status = "okay";
  45
  46                         partition@0 {
  47                                 label = "u-boot";
  48                                 reg = <0x00000000 0x00100000>;
  49                                 read-only;
  50                         };
  51
  52                         partition@100000 {
  53                                 label = "uImage";
  54                                 reg = <0x00100000 0x00400000>;
  55                         };
  56
  57                         partition@500000 {
  58                                 label = "data";
  59                                 reg = <0x00500000 0x1fb00000>;
  60                         };
  61                 };
  62
  63                 sata@80000 {
  64                         status = "okay";
  65                         nr-ports = <1>;
  66                 };
  67
  68                 mvsdio@90000 {
  69                         status = "okay";
  70                         /* No CD or WP GPIOs */
  71                         broken-cd;
  72                 };
  73         };
  74
  75         gpio-leds {
  76                 compatible = "gpio-leds";
  77                 pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
  78                               &pmx_led_wmode_r &pmx_led_wmode_g >;
  79                 pinctrl-names = "default";
  80
  81                 health-r {
  82                         label = "guruplug:red:health";
  83                         gpios = <&gpio1 14 1>;
  84                 };
  85                 health-g {
  86                         label = "guruplug:green:health";
  87                         gpios = <&gpio1 15 1>;
  88                 };
  89                 wmode-r {
  90                         label = "guruplug:red:wmode";
  91                         gpios = <&gpio1 16 1>;
  92                 };
  93                 wmode-g {
  94                         label = "guruplug:green:wmode";
  95                         gpios = <&gpio1 17 1>;
  96                 };
  97         };
  98 };
  99
 100 &mdio {
 101         status = "okay";
 102
 103         ethphy0: ethernet-phy@0 {
 104                 device_type = "ethernet-phy";
 105                 compatible = "marvell,88e1121";
 106                 reg = <0>;
 107         };
 108
 109         ethphy1: ethernet-phy@1 {
 110                 device_type = "ethernet-phy";
 111                 compatible = "marvell,88e1121";
 112                 reg = <1>;
 113         };
 114 };
 115
 116 &eth0 {
 117         status = "okay";
 118         ethernet0-port@0 {
 119                 phy-handle = <&ethphy0>;
 120         };
 121 };
 122
 123 &eth1 {
 124         status = "okay";
 125         ethernet1-port@0 {
 126                 phy-handle = <&ethphy1>;
 127         };
 128 };