arch/arm/boot/dts/kirkwood-nsa320.dts

   1 /* Device tree file for the Zyxel NSA 320 NAS box.
   2  *
   3  * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License
   7  * as published by the Free Software Foundation; either version
   8  * 2 of the License, or (at your option) any later version.
   9  *
  10  * Based upon the board setup file created by Peter Schildmann */
  11
  12 /dts-v1/;
  13
  14 #include "kirkwood-nsa3x0-common.dtsi"
  15
  16 / {
  17         model = "Zyxel NSA320";
  18         compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  19
  20         memory {
  21                 device_type = "memory";
  22                 reg = <0x00000000 0x20000000>;
  23         };
  24
  25         chosen {
  26                 bootargs = "console=ttyS0,115200";
  27                 stdout-path = &uart0;
  28         };
  29
  30         ocp@f1000000 {
  31                 pinctrl: pin-controller@10000 {
  32                         pinctrl-names = "default";
  33
  34                         /* SATA Activity and Present pins are not connected */
  35                         pmx_sata0: pmx-sata0 {
  36                                 marvell,pins ;
  37                                 marvell,function = "sata0";
  38                         };
  39
  40                         pmx_sata1: pmx-sata1 {
  41                                 marvell,pins ;
  42                                 marvell,function = "sata1";
  43                         };
  44
  45                         pmx_led_hdd2_green: pmx-led-hdd2-green {
  46                                 marvell,pins = "mpp12";
  47                                 marvell,function = "gpio";
  48                         };
  49
  50                         pmx_led_hdd2_red: pmx-led-hdd2-red {
  51                                 marvell,pins = "mpp13";
  52                                 marvell,function = "gpio";
  53                         };
  54
  55                         pmx_mcu_data: pmx-mcu-data {
  56                                 marvell,pins = "mpp14";
  57                                 marvell,function = "gpio";
  58                         };
  59
  60                         pmx_led_usb_green: pmx-led-usb-green {
  61                                 marvell,pins = "mpp15";
  62                                 marvell,function = "gpio";
  63                         };
  64
  65                         pmx_mcu_clk: pmx-mcu-clk {
  66                                 marvell,pins = "mpp16";
  67                                 marvell,function = "gpio";
  68                         };
  69
  70                         pmx_mcu_act: pmx-mcu-act {
  71                                 marvell,pins = "mpp17";
  72                                 marvell,function = "gpio";
  73                         };
  74
  75                         pmx_led_sys_green: pmx-led-sys-green {
  76                                 marvell,pins = "mpp28";
  77                                 marvell,function = "gpio";
  78                         };
  79
  80                         pmx_led_sys_orange: pmx-led-sys-orange {
  81                                 marvell,pins = "mpp29";
  82                                 marvell,function = "gpio";
  83                         };
  84
  85                         pmx_led_hdd1_green: pmx-led-hdd1-green {
  86                                 marvell,pins = "mpp41";
  87                                 marvell,function = "gpio";
  88                         };
  89
  90                         pmx_led_hdd1_red: pmx-led-hdd1-red {
  91                                 marvell,pins = "mpp42";
  92                                 marvell,function = "gpio";
  93                         };
  94
  95                         pmx_htp: pmx-htp {
  96                                 marvell,pins = "mpp43";
  97                                 marvell,function = "gpio";
  98                         };
  99
 100                         /* Buzzer needs to be switched at around 1kHz so is
 101                            not compatible with the gpio-beeper driver. */
 102                         pmx_buzzer: pmx-buzzer {
 103                                 marvell,pins = "mpp44";
 104                                 marvell,function = "gpio";
 105                         };
 106
 107                         pmx_vid_b1: pmx-vid-b1 {
 108                                 marvell,pins = "mpp45";
 109                                 marvell,function = "gpio";
 110                         };
 111
 112                         pmx_power_resume_data: pmx-power-resume-data {
 113                                 marvell,pins = "mpp47";
 114                                 marvell,function = "gpio";
 115                         };
 116
 117                         pmx_power_resume_clk: pmx-power-resume-clk {
 118                                 marvell,pins = "mpp49";
 119                                 marvell,function = "gpio";
 120                         };
 121                 };
 122
 123                 i2c@11000 {
 124                         status = "okay";
 125
 126                         pcf8563: pcf8563@51 {
 127                                 compatible = "nxp,pcf8563";
 128                                 reg = <0x51>;
 129                         };
 130                 };
 131         };
 132
 133         regulators {
 134                 usb0_power: regulator@1 {
 135                         enable-active-high;
 136                 };
 137         };
 138
 139         gpio-leds {
 140                 compatible = "gpio-leds";
 141                 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
 142                              &pmx_led_usb_green
 143                              &pmx_led_sys_green &pmx_led_sys_orange
 144                              &pmx_led_copy_green &pmx_led_copy_red
 145                              &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 146                 pinctrl-names = "default";
 147
 148                 green-sys {
 149                         label = "nsa320:green:sys";
 150                         gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 151                 };
 152                 orange-sys {
 153                         label = "nsa320:orange:sys";
 154                         gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 155                 };
 156                 green-hdd1 {
 157                         label = "nsa320:green:hdd1";
 158                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 159                 };
 160                 red-hdd1 {
 161                         label = "nsa320:red:hdd1";
 162                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 163                 };
 164                 green-hdd2 {
 165                         label = "nsa320:green:hdd2";
 166                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 167                 };
 168                 red-hdd2 {
 169                         label = "nsa320:red:hdd2";
 170                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 171                 };
 172                 green-usb {
 173                         label = "nsa320:green:usb";
 174                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 175                 };
 176                 green-copy {
 177                         label = "nsa320:green:copy";
 178                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 179                 };
 180                 red-copy {
 181                         label = "nsa320:red:copy";
 182                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 183                 };
 184         };
 185
 186         hwmon {
 187                 compatible = "zyxel,nsa320-mcu";
 188                 pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
 189                 pinctrl-names = "default";
 190
 191                 data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 192                 clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 193                 act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 194         };
 195
 196         /* The following pins are currently not assigned to a driver,
 197            some of them should be configured as inputs.
 198         pinctrl-0 = <&pmx_htp &pmx_vid_b1
 199                      &pmx_power_resume_data &pmx_power_resume_clk>; */
 200 };
 201
 202 &mdio {
 203         status = "okay";
 204         ethphy0: ethernet-phy@1 {
 205                 reg = <1>;
 206         };
 207 };
 208
 209 &eth0 {
 210         status = "okay";
 211         ethernet0-port@0 {
 212                 phy-handle = <&ethphy0>;
 213         };
 214 };
 215
 216 &pciec {
 217         status = "okay";
 218 };
 219
 220 &pcie0 {
 221         status = "okay";
 222 };