arch/arm/boot/dts/kirkwood.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
   6
   7 / {
   8         #address-cells = <1>;
   9         #size-cells = <1>;
  10         compatible = "marvell,kirkwood";
  11         interrupt-parent = <&intc>;
  12
  13         cpus {
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16
  17                 cpu@0 {
  18                         device_type = "cpu";
  19                         compatible = "marvell,feroceon";
  20                         reg = <0>;
  21                         clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
  22                         clock-names = "cpu_clk", "ddrclk", "powersave";
  23                 };
  24         };
  25
  26         aliases {
  27                gpio0 = &gpio0;
  28                gpio1 = &gpio1;
  29                i2c0 = &i2c0;
  30         };
  31
  32         mbus@f1000000 {
  33                 compatible = "marvell,kirkwood-mbus", "simple-bus";
  34                 #address-cells = <2>;
  35                 #size-cells = <1>;
  36                 /* If a board file needs to change this ranges it must replace it completely */
  37                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000     /* internal-regs */
  38                           MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000      /* nand flash */
  39                           MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000      /* crypto sram */
  40                           >;
  41                 controller = <&mbusc>;
  42                 pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
  43                 pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
  44
  45                 nand: nand@12f {
  46                         #address-cells = <1>;
  47                         #size-cells = <1>;
  48                         cle = <0>;
  49                         ale = <1>;
  50                         bank-width = <1>;
  51                         compatible = "marvell,orion-nand";
  52                         reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
  53                         chip-delay = <25>;
  54                         /* set partition map and/or chip-delay in board dts */
  55                         clocks = <&gate_clk 7>;
  56                         pinctrl-0 = <&pmx_nand>;
  57                         pinctrl-names = "default";
  58                         status = "disabled";
  59                 };
  60
  61                 crypto_sram: sa-sram@301 {
  62                         compatible = "mmio-sram";
  63                         reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
  64                         clocks = <&gate_clk 17>;
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67                 };
  68         };
  69
  70         ocp@f1000000 {
  71                 compatible = "simple-bus";
  72                 ranges = <0x00000000 0xf1000000 0x0100000>;
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75
  76                 pinctrl: pin-controller@10000 {
  77                         /* set compatible property in SoC file */
  78                         reg = <0x10000 0x20>;
  79
  80                         pmx_ge1: pmx-ge1 {
  81                                 marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
  82                                                "mpp24", "mpp25", "mpp26", "mpp27",
  83                                                "mpp30", "mpp31", "mpp32", "mpp33";
  84                                 marvell,function = "ge1";
  85                         };
  86
  87                         pmx_nand: pmx-nand {
  88                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
  89                                                "mpp4", "mpp5", "mpp18", "mpp19";
  90                                 marvell,function = "nand";
  91                         };
  92
  93                         /*
  94                          * Default SPI0 pinctrl setting with CSn on mpp0,
  95                          * overwrite marvell,pins on board level if required.
  96                          */
  97                         pmx_spi: pmx-spi {
  98                                 marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
  99                                 marvell,function = "spi";
 100                         };
 101
 102                         pmx_twsi0: pmx-twsi0 {
 103                                 marvell,pins = "mpp8", "mpp9";
 104                                 marvell,function = "twsi0";
 105                         };
 106
 107                         /*
 108                          * Default UART pinctrl setting without RTS/CTS,
 109                          * overwrite marvell,pins on board level if required.
 110                          */
 111                         pmx_uart0: pmx-uart0 {
 112                                 marvell,pins = "mpp10", "mpp11";
 113                                 marvell,function = "uart0";
 114                         };
 115
 116                         pmx_uart1: pmx-uart1 {
 117                                 marvell,pins = "mpp13", "mpp14";
 118                                 marvell,function = "uart1";
 119                         };
 120                 };
 121
 122                 core_clk: core-clocks@10030 {
 123                         compatible = "marvell,kirkwood-core-clock";
 124                         reg = <0x10030 0x4>;
 125                         #clock-cells = <1>;
 126                 };
 127
 128                 spi0: spi@10600 {
 129                         compatible = "marvell,orion-spi";
 130                         #address-cells = <1>;
 131                         #size-cells = <0>;
 132                         cell-index = <0>;
 133                         interrupts = <23>;
 134                         reg = <0x10600 0x28>;
 135                         clocks = <&gate_clk 7>;
 136                         pinctrl-0 = <&pmx_spi>;
 137                         pinctrl-names = "default";
 138                         status = "disabled";
 139                 };
 140
 141                 gpio0: gpio@10100 {
 142                         compatible = "marvell,orion-gpio";
 143                         #gpio-cells = <2>;
 144                         gpio-controller;
 145                         reg = <0x10100 0x40>;
 146                         ngpios = <32>;
 147                         interrupt-controller;
 148                         #interrupt-cells = <2>;
 149                         interrupts = <35>, <36>, <37>, <38>;
 150                         clocks = <&gate_clk 7>;
 151                 };
 152
 153                 gpio1: gpio@10140 {
 154                         compatible = "marvell,orion-gpio";
 155                         #gpio-cells = <2>;
 156                         gpio-controller;
 157                         reg = <0x10140 0x40>;
 158                         ngpios = <18>;
 159                         interrupt-controller;
 160                         #interrupt-cells = <2>;
 161                         interrupts = <39>, <40>, <41>;
 162                         clocks = <&gate_clk 7>;
 163                 };
 164
 165                 i2c0: i2c@11000 {
 166                         compatible = "marvell,mv64xxx-i2c";
 167                         reg = <0x11000 0x20>;
 168                         #address-cells = <1>;
 169                         #size-cells = <0>;
 170                         interrupts = <29>;
 171                         clock-frequency = <100000>;
 172                         clocks = <&gate_clk 7>;
 173                         pinctrl-0 = <&pmx_twsi0>;
 174                         pinctrl-names = "default";
 175                         status = "disabled";
 176                 };
 177
 178                 uart0: serial@12000 {
 179                         compatible = "ns16550a";
 180                         reg = <0x12000 0x100>;
 181                         reg-shift = <2>;
 182                         interrupts = <33>;
 183                         clocks = <&gate_clk 7>;
 184                         pinctrl-0 = <&pmx_uart0>;
 185                         pinctrl-names = "default";
 186                         status = "disabled";
 187                 };
 188
 189                 uart1: serial@12100 {
 190                         compatible = "ns16550a";
 191                         reg = <0x12100 0x100>;
 192                         reg-shift = <2>;
 193                         interrupts = <34>;
 194                         clocks = <&gate_clk 7>;
 195                         pinctrl-0 = <&pmx_uart1>;
 196                         pinctrl-names = "default";
 197                         status = "disabled";
 198                 };
 199
 200                 mbusc: mbus-controller@20000 {
 201                         compatible = "marvell,mbus-controller";
 202                         reg = <0x20000 0x80>, <0x1500 0x20>;
 203                 };
 204
 205                 sysc: system-controller@20000 {
 206                         compatible = "marvell,orion-system-controller";
 207                         reg = <0x20000 0x120>;
 208                 };
 209
 210                 bridge_intc: bridge-interrupt-ctrl@20110 {
 211                         compatible = "marvell,orion-bridge-intc";
 212                         interrupt-controller;
 213                         #interrupt-cells = <1>;
 214                         reg = <0x20110 0x8>;
 215                         interrupts = <1>;
 216                         marvell,#interrupts = <6>;
 217                 };
 218
 219                 gate_clk: clock-gating-control@2011c {
 220                         compatible = "marvell,kirkwood-gating-clock";
 221                         reg = <0x2011c 0x4>;
 222                         clocks = <&core_clk 0>;
 223                         #clock-cells = <1>;
 224                 };
 225
 226                 l2: l2-cache@20128 {
 227                         compatible = "marvell,kirkwood-cache";
 228                         reg = <0x20128 0x4>;
 229                 };
 230
 231                 intc: main-interrupt-ctrl@20200 {
 232                         compatible = "marvell,orion-intc";
 233                         interrupt-controller;
 234                         #interrupt-cells = <1>;
 235                         reg = <0x20200 0x10>, <0x20210 0x10>;
 236                 };
 237
 238                 timer: timer@20300 {
 239                         compatible = "marvell,orion-timer";
 240                         reg = <0x20300 0x20>;
 241                         interrupt-parent = <&bridge_intc>;
 242                         interrupts = <1>, <2>;
 243                         clocks = <&core_clk 0>;
 244                 };
 245
 246                 wdt: watchdog-timer@20300 {
 247                         compatible = "marvell,orion-wdt";
 248                         reg = <0x20300 0x28>, <0x20108 0x4>;
 249                         interrupt-parent = <&bridge_intc>;
 250                         interrupts = <3>;
 251                         clocks = <&gate_clk 7>;
 252                         status = "okay";
 253                 };
 254
 255                 cesa: crypto@30000 {
 256                         compatible = "marvell,kirkwood-crypto";
 257                         reg = <0x30000 0x10000>;
 258                         reg-names = "regs";
 259                         interrupts = <22>;
 260                         clocks = <&gate_clk 17>;
 261                         marvell,crypto-srams = <&crypto_sram>;
 262                         marvell,crypto-sram-size = <0x800>;
 263                         status = "okay";
 264                 };
 265
 266                 usb0: ehci@50000 {
 267                         compatible = "marvell,orion-ehci";
 268                         reg = <0x50000 0x1000>;
 269                         interrupts = <19>;
 270                         clocks = <&gate_clk 3>;
 271                         status = "okay";
 272                 };
 273
 274                 dma0: xor@60800 {
 275                         compatible = "marvell,orion-xor";
 276                         reg = <0x60800 0x100
 277                                0x60A00 0x100>;
 278                         status = "okay";
 279                         clocks = <&gate_clk 8>;
 280
 281                         xor00 {
 282                               interrupts = <5>;
 283                               dmacap,memcpy;
 284                               dmacap,xor;
 285                         };
 286                         xor01 {
 287                               interrupts = <6>;
 288                               dmacap,memcpy;
 289                               dmacap,xor;
 290                               dmacap,memset;
 291                         };
 292                 };
 293
 294                 dma1: xor@60900 {
 295                         compatible = "marvell,orion-xor";
 296                         reg = <0x60900 0x100
 297                                0x60B00 0x100>;
 298                         status = "okay";
 299                         clocks = <&gate_clk 16>;
 300
 301                         xor00 {
 302                               interrupts = <7>;
 303                               dmacap,memcpy;
 304                               dmacap,xor;
 305                         };
 306                         xor01 {
 307                               interrupts = <8>;
 308                               dmacap,memcpy;
 309                               dmacap,xor;
 310                               dmacap,memset;
 311                         };
 312                 };
 313
 314                 eth0: ethernet-controller@72000 {
 315                         compatible = "marvell,kirkwood-eth";
 316                         #address-cells = <1>;
 317                         #size-cells = <0>;
 318                         reg = <0x72000 0x4000>;
 319                         clocks = <&gate_clk 0>;
 320                         marvell,tx-checksum-limit = <1600>;
 321                         status = "disabled";
 322
 323                         eth0port: ethernet0-port@0 {
 324                                 compatible = "marvell,kirkwood-eth-port";
 325                                 reg = <0>;
 326                                 interrupts = <11>;
 327                                 /* overwrite MAC address in bootloader */
 328                                 local-mac-address = [00 00 00 00 00 00];
 329                                 /* set phy-handle property in board file */
 330                         };
 331                 };
 332
 333                 mdio: mdio-bus@72004 {
 334                         compatible = "marvell,orion-mdio";
 335                         #address-cells = <1>;
 336                         #size-cells = <0>;
 337                         reg = <0x72004 0x84>;
 338                         interrupts = <46>;
 339                         clocks = <&gate_clk 0>;
 340                         status = "disabled";
 341
 342                         /* add phy nodes in board file */
 343                 };
 344
 345                 eth1: ethernet-controller@76000 {
 346                         compatible = "marvell,kirkwood-eth";
 347                         #address-cells = <1>;
 348                         #size-cells = <0>;
 349                         reg = <0x76000 0x4000>;
 350                         clocks = <&gate_clk 19>;
 351                         marvell,tx-checksum-limit = <1600>;
 352                         pinctrl-0 = <&pmx_ge1>;
 353                         pinctrl-names = "default";
 354                         status = "disabled";
 355
 356                         eth1port: ethernet1-port@0 {
 357                                 compatible = "marvell,kirkwood-eth-port";
 358                                 reg = <0>;
 359                                 interrupts = <15>;
 360                                 /* overwrite MAC address in bootloader */
 361                                 local-mac-address = [00 00 00 00 00 00];
 362                                 /* set phy-handle property in board file */
 363                         };
 364                 };
 365
 366                 sata_phy0: sata-phy@82000 {
 367                         compatible = "marvell,mvebu-sata-phy";
 368                         reg = <0x82000 0x0334>;
 369                         clocks = <&gate_clk 14>;
 370                         clock-names = "sata";
 371                         #phy-cells = <0>;
 372                         status = "ok";
 373                 };
 374
 375                 sata_phy1: sata-phy@84000 {
 376                         compatible = "marvell,mvebu-sata-phy";
 377                         reg = <0x84000 0x0334>;
 378                         clocks = <&gate_clk 15>;
 379                         clock-names = "sata";
 380                         #phy-cells = <0>;
 381                         status = "ok";
 382                 };
 383
 384                 audio0: audio-controller@a0000 {
 385                         compatible = "marvell,kirkwood-audio";
 386                         #sound-dai-cells = <0>;
 387                         reg = <0xa0000 0x2210>;
 388                         interrupts = <24>;
 389                         clocks = <&gate_clk 9>;
 390                         clock-names = "internal";
 391                         status = "disabled";
 392                 };
 393         };
 394 };