arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

   1 /*
   2  * This program is free software; you can redistribute it and/or modify
   3  * it under the terms of the GNU General Public License version 2 as
   4  * published by the Free Software Foundation.
   5  */
   6
   7 /dts-v1/;
   8
   9 #include "omap36xx.dtsi"
  10 #include "logicpd-torpedo-som.dtsi"
  11 #include "omap-gpmc-smsc9221.dtsi"
  12
  13 / {
  14         model = "LogicPD Zoom DM3730 Torpedo Development Kit";
  15         compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
  16
  17         gpio_keys {
  18                 compatible = "gpio-keys";
  19                 pinctrl-names = "default";
  20                 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
  21
  22                 sysboot2 {
  23                         label = "sysboot2";
  24                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;     /* gpio2 */
  25                         linux,code = <BTN_0>;
  26                         gpio-key,wakeup;
  27                 };
  28
  29                 sysboot5 {
  30                         label = "sysboot5";
  31                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;     /* gpio7 */
  32                         linux,code = <BTN_1>;
  33                         gpio-key,wakeup;
  34                 };
  35
  36                 gpio1 {
  37                         label = "gpio1";
  38                         gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;    /* gpio181 */
  39                         linux,code = <BTN_2>;
  40                         gpio-key,wakeup;
  41                 };
  42
  43                 gpio2 {
  44                         label = "gpio2";
  45                         gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;    /* gpio178 */
  46                         linux,code = <BTN_3>;
  47                         gpio-key,wakeup;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&led_pins>;
  55
  56                 led1 {
  57                         label = "led1";
  58                         gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;   /* gpio180 */
  59                         linux,default-trigger = "cpu0";
  60                 };
  61
  62                 led2 {
  63                         label = "led2";
  64                         gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;   /* gpio179 */
  65                         linux,default-trigger = "none";
  66                 };
  67         };
  68 };
  69
  70 &charger {
  71         ti,bb-uvolt = <3200000>;
  72         ti,bb-uamp = <150>;
  73 };
  74
  75 &gpmc {
  76         ranges = <1 0 0x08000000 0x1000000>;    /* CS1: 16MB for LAN9221 */
  77
  78         ethernet@gpmc {
  79                 pinctrl-names = "default";
  80                 pinctrl-0 = <&lan9221_pins>;
  81                 interrupt-parent = <&gpio5>;
  82                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;            /* gpio129 */
  83                 reg = <1 0 0xff>;
  84         };
  85 };
  86
  87 &mmc1 {
  88         interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&mmc1_pins &mmc1_cd>;
  91         cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;              /* gpio127 */
  92         vmmc-supply = <&vmmc1>;
  93         bus-width = <4>;
  94         cap-power-off-card;
  95 };
  96
  97 &omap3_pmx_core {
  98         gpio_key_pins: pinmux_gpio_key_pins {
  99                 pinctrl-single,pins = <
 100                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
 101                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
 102                 >;
 103         };
 104
 105         led_pins: pinmux_led_pins {
 106                 pinctrl-single,pins = <
 107                         OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)       /* gpio_179 */
 108                         OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)       /* gpio_180 */
 109                 >;
 110         };
 111
 112         mmc1_pins: pinmux_mmc1_pins {
 113                 pinctrl-single,pins = <
 114                         OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)       /* sdmmc1_clk.sdmmc1_clk */
 115                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)        /* sdmmc1_cmd.sdmmc1_cmd */
 116                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat0.sdmmc1_dat0 */
 117                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat1.sdmmc1_dat1 */
 118                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat2.sdmmc1_dat2 */
 119                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat3.sdmmc1_dat3 */
 120                 >;
 121         };
 122 };
 123
 124 &omap3_pmx_wkup {
 125         gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
 126                 pinctrl-single,pins = <
 127                         OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot0.gpio_2 */
 128                         OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot5.gpio_7 */
 129                 >;
 130         };
 131
 132         lan9221_pins: pinmux_lan9221_pins {
 133                 pinctrl-single,pins = <
 134                         OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)         /* reserved.gpio_129 */
 135                 >;
 136         };
 137
 138         mmc1_cd: pinmux_mmc1_cd {
 139                 pinctrl-single,pins = <
 140                         OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)  /* reserved.gpio_127 */
 141                 >;
 142         };
 143 };
 144
 145 &uart1 {
 146         interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 147 };
 148
 149 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
 150 &usb_otg_hs {
 151         interface-type = <0>;
 152         usb-phy = <&usb2_phy>;
 153         phys = <&usb2_phy>;
 154         phy-names = "usb2-phy";
 155         mode = <3>;
 156         power = <50>;
 157 };