arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 / {
   4         gpio_keys {
   5                 compatible = "gpio-keys";
   6                 pinctrl-names = "default";
   7                 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
   8
   9                 sysboot2 {
  10                         label = "sysboot2";
  11                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;     /* gpio2 */
  12                         linux,code = <BTN_0>;
  13                         wakeup-source;
  14                 };
  15
  16                 sysboot5 {
  17                         label = "sysboot5";
  18                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;     /* gpio7 */
  19                         linux,code = <BTN_1>;
  20                         wakeup-source;
  21                 };
  22
  23                 gpio1 {
  24                         label = "gpio1";
  25                         gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;    /* gpio181 */
  26                         linux,code = <BTN_2>;
  27                         wakeup-source;
  28                 };
  29
  30                 gpio2 {
  31                         label = "gpio2";
  32                         gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;    /* gpio178 */
  33                         linux,code = <BTN_3>;
  34                         wakeup-source;
  35                 };
  36         };
  37
  38         sound {
  39                 compatible = "ti,omap-twl4030";
  40                 ti,model = "omap3logic";
  41                 ti,mcbsp = <&mcbsp2>;
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46                 pinctrl-names = "default";
  47                 pinctrl-0 = <&led_pins>;
  48
  49                 led1 {
  50                         label = "led1";
  51                         gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;   /* gpio180 */
  52                         linux,default-trigger = "cpu0";
  53                 };
  54
  55                 led2 {
  56                         label = "led2";
  57                         gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;   /* gpio179 */
  58                         linux,default-trigger = "none";
  59                 };
  60         };
  61
  62         pwm10: dmtimer-pwm {
  63                 compatible = "ti,omap-dmtimer-pwm";
  64                 pinctrl-names = "default";
  65                 pinctrl-0 = <&pwm_pins>;
  66                 ti,timers = <&timer10>;
  67                 #pwm-cells = <3>;
  68         };
  69
  70 };
  71
  72 &vaux1 {
  73         regulator-min-microvolt = <3000000>;
  74         regulator-max-microvolt = <3000000>;
  75 };
  76
  77 &vaux4 {
  78         regulator-min-microvolt = <1800000>;
  79         regulator-max-microvolt = <1800000>;
  80 };
  81
  82 &mcbsp2 {
  83         status = "okay";
  84 };
  85
  86 &charger {
  87         ti,bb-uvolt = <3200000>;
  88         ti,bb-uamp = <150>;
  89 };
  90
  91 &gpmc {
  92         ranges = <0 0 0x30000000 0x1000000      /* CS0: 16MB for NAND */
  93                   1 0 0x2c000000 0x1000000>;    /* CS1: 16MB for LAN9221 */
  94
  95         ethernet@gpmc {
  96                 pinctrl-names = "default";
  97                 pinctrl-0 = <&lan9221_pins>;
  98                 interrupt-parent = <&gpio5>;
  99                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;            /* gpio129 */
 100                 reg = <1 0 0xff>;
 101         };
 102 };
 103
 104 &vpll2 {
 105         regulator-always-on;
 106 };
 107
 108 &dss {
 109         status = "ok";
 110         vdds_dsi-supply = <&vpll2>;
 111         vdda_video-supply = <&video_reg>;
 112         pinctrl-names = "default";
 113         pinctrl-0 = <&dss_dpi_pins1>;
 114         port {
 115                 dpi_out: endpoint {
 116                         remote-endpoint = <&lcd_in>;
 117                         data-lines = <16>;
 118                 };
 119         };
 120 };
 121
 122 / {
 123         aliases {
 124                 display0 = &lcd0;
 125         };
 126
 127         video_reg: video_reg {
 128                 pinctrl-names = "default";
 129                 pinctrl-0 = <&panel_pwr_pins>;
 130                 compatible = "regulator-fixed";
 131                 regulator-name = "fixed-supply";
 132                 regulator-min-microvolt = <3300000>;
 133                 regulator-max-microvolt = <3300000>;
 134                 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;    /* gpio155, lcd INI */
 135         };
 136
 137         lcd0: display {
 138                 compatible = "panel-dpi";
 139                 label = "15";
 140                 status = "okay";
 141                 /* default-on; */
 142                 pinctrl-names = "default";
 143
 144                 port {
 145                         lcd_in: endpoint {
 146                                 remote-endpoint = <&dpi_out>;
 147                         };
 148                 };
 149
 150                 panel-timing {
 151                         clock-frequency = <9000000>;
 152                         hactive = <480>;
 153                         vactive = <272>;
 154                         hfront-porch = <3>;
 155                         hback-porch = <2>;
 156                         hsync-len = <42>;
 157                         vback-porch = <3>;
 158                         vfront-porch = <4>;
 159                         vsync-len = <11>;
 160                         hsync-active = <0>;
 161                         vsync-active = <0>;
 162                         de-active = <1>;
 163                         pixelclk-active = <1>;
 164                 };
 165         };
 166
 167         bl: backlight {
 168                 compatible = "pwm-backlight";
 169                 pinctrl-names = "default";
 170                 pinctrl-0 = <&backlight_pins>;
 171                 pwms = <&pwm10 0 5000000 0>;
 172                 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 173                 default-brightness-level = <7>;
 174                 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
 175         };
 176 };
 177
 178 &mmc1 {
 179         interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 180         pinctrl-names = "default";
 181         pinctrl-0 = <&mmc1_pins &mmc1_cd>;
 182         cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;         /* gpio127 */
 183         vmmc-supply = <&vmmc1>;
 184         bus-width = <4>;
 185         cap-power-off-card;
 186 };
 187
 188 &omap3_pmx_core {
 189         gpio_key_pins: pinmux_gpio_key_pins {
 190                 pinctrl-single,pins = <
 191                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
 192                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
 193                 >;
 194         };
 195
 196         pwm_pins: pinmux_pwm_pins {
 197                 pinctrl-single,pins = <
 198                         OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
 199                 >;
 200         };
 201
 202         led_pins: pinmux_led_pins {
 203                 pinctrl-single,pins = <
 204                         OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)       /* gpio_179 */
 205                         OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)       /* gpio_180 */
 206                 >;
 207         };
 208
 209         mmc1_pins: pinmux_mmc1_pins {
 210                 pinctrl-single,pins = <
 211                         OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)       /* sdmmc1_clk.sdmmc1_clk */
 212                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)        /* sdmmc1_cmd.sdmmc1_cmd */
 213                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat0.sdmmc1_dat0 */
 214                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat1.sdmmc1_dat1 */
 215                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat2.sdmmc1_dat2 */
 216                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)        /* sdmmc1_dat3.sdmmc1_dat3 */
 217                 >;
 218         };
 219
 220         tsc2004_pins: pinmux_tsc2004_pins {
 221                 pinctrl-single,pins = <
 222                         OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)        /* mcbsp4_dr.gpio_153 */
 223                 >;
 224         };
 225
 226         backlight_pins: pinmux_backlight_pins {
 227                 pinctrl-single,pins = <
 228                         OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
 229                 >;
 230         };
 231
 232         isp_pins: pinmux_isp_pins {
 233                 pinctrl-single,pins = <
 234                         OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
 235                         OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
 236                         OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
 237                         OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
 238
 239                         OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
 240                         OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
 241                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
 242                         OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
 243                         OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
 244                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
 245                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
 246                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
 247                 >;
 248         };
 249
 250         panel_pwr_pins: pinmux_panel_pwr_pins {
 251                 pinctrl-single,pins = <
 252                         OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
 253                 >;
 254         };
 255
 256         dss_dpi_pins1: pinmux_dss_dpi_pins1 {
 257                 pinctrl-single,pins = <
 258                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
 259                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
 260                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
 261                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
 262
 263                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
 264                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
 265                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
 266                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
 267                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
 268                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
 269                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
 270                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
 271                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
 272                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
 273                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
 274                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
 275
 276                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
 277                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
 278                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
 279                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
 280                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
 281                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
 282                 >;
 283         };
 284 };
 285
 286 &omap3_pmx_wkup {
 287         gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
 288                 pinctrl-single,pins = <
 289                         OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot0.gpio_2 */
 290                         OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_boot5.gpio_7 */
 291                 >;
 292         };
 293
 294         lan9221_pins: pinmux_lan9221_pins {
 295                 pinctrl-single,pins = <
 296                         OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)         /* reserved.gpio_129 */
 297                 >;
 298         };
 299
 300         mmc1_cd: pinmux_mmc1_cd {
 301                 pinctrl-single,pins = <
 302                         OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)  /* reserved.gpio_127 */
 303                 >;
 304         };
 305 };
 306
 307 &i2c2 {
 308         mt9p031@48 {
 309                 compatible = "aptina,mt9p031";
 310                 reg = <0x48>;
 311                 clocks = <&isp 0>;
 312                 vaa-supply = <&vaux4>;
 313                 vdd-supply = <&vaux4>;
 314                 vdd_io-supply = <&vaux4>;
 315                 port {
 316                         mt9p031_out: endpoint {
 317                                 input-clock-frequency = <24000000>;
 318                                 pixel-clock-frequency = <72000000>;
 319                                 remote-endpoint = <&ccdc_ep>;
 320                         };
 321                 };
 322         };
 323 };
 324
 325 &i2c3 {
 326         touchscreen: tsc2004@48 {
 327                 compatible = "ti,tsc2004";
 328                 reg = <0x48>;
 329                 vio-supply = <&vaux1>;
 330                 pinctrl-names = "default";
 331                 pinctrl-0 = <&tsc2004_pins>;
 332                 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
 333
 334                 touchscreen-fuzz-x = <4>;
 335                 touchscreen-fuzz-y = <7>;
 336                 touchscreen-fuzz-pressure = <2>;
 337                 touchscreen-size-x = <4096>;
 338                 touchscreen-size-y = <4096>;
 339                 touchscreen-max-pressure = <2048>;
 340
 341                 ti,x-plate-ohms = <280>;
 342                 ti,esd-recovery-timeout-ms = <8000>;
 343         };
 344 };
 345
 346 &mcspi1 {
 347         at25@0 {
 348                 compatible = "atmel,at25";
 349                 reg = <0>;
 350                 spi-max-frequency = <5000000>;
 351                 spi-cpha;
 352                 spi-cpol;
 353
 354                 pagesize = <64>;
 355                 size = <32768>;
 356                 address-width = <16>;
 357         };
 358 };
 359
 360 &isp {
 361         pinctrl-names = "default";
 362         pinctrl-0 = <&isp_pins>;
 363         ports {
 364                 port@0 {
 365                         reg = <0>;
 366                         ccdc_ep: endpoint {
 367                                 remote-endpoint = <&mt9p031_out>;
 368                                 bus-width = <8>;
 369                                 hsync-active = <1>;
 370                                 vsync-active = <1>;
 371                                 pclk-sample = <0>;
 372                         };
 373                 };
 374         };
 375 };
 376
 377 &uart1 {
 378         interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 379 };
 380
 381 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
 382 &usb_otg_hs {
 383         pinctrl-names = "default";
 384         pinctrl-0 = <&hsusb_otg_pins>;
 385         interface-type = <0>;
 386         usb-phy = <&usb2_phy>;
 387         phys = <&usb2_phy>;
 388         phy-names = "usb2-phy";
 389         mode = <3>;
 390         power = <50>;
 391 };