arch/arm/boot/dts/meson.dtsi

   1 /*
   2  * Copyright 2014 Carlo Caione <carlo@caione.org>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This library is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This library is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this library; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include <dt-bindings/interrupt-controller/irq.h>
  49 #include <dt-bindings/interrupt-controller/arm-gic.h>
  50 /include/ "skeleton.dtsi"
  51
  52 / {
  53         interrupt-parent = <&gic>;
  54
  55         L2: l2-cache-controller@c4200000 {
  56                 compatible = "arm,pl310-cache";
  57                 reg = <0xc4200000 0x1000>;
  58                 cache-unified;
  59                 cache-level = <2>;
  60         };
  61
  62         gic: interrupt-controller@c4301000 {
  63                 compatible = "arm,cortex-a9-gic";
  64                 reg = <0xc4301000 0x1000>,
  65                       <0xc4300100 0x0100>;
  66                 interrupt-controller;
  67                 #interrupt-cells = <3>;
  68         };
  69
  70         soc {
  71                 compatible = "simple-bus";
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 ranges;
  75
  76                 cbus: cbus@c1100000 {
  77                         compatible = "simple-bus";
  78                         reg = <0xc1100000 0x200000>;
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81                         ranges = <0x0 0xc1100000 0x200000>;
  82
  83                         hwrng: rng@8100 {
  84                                 compatible = "amlogic,meson-rng";
  85                                 reg = <0x8100 0x8>;
  86                         };
  87
  88                         uart_A: serial@84c0 {
  89                                 compatible = "amlogic,meson-uart";
  90                                 reg = <0x84c0 0x18>;
  91                                 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
  92                                 status = "disabled";
  93                         };
  94
  95                         uart_B: serial@84dc {
  96                                 compatible = "amlogic,meson-uart";
  97                                 reg = <0x84dc 0x18>;
  98                                 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
  99                                 status = "disabled";
 100                         };
 101
 102                         i2c_A: i2c@8500 {
 103                                 compatible = "amlogic,meson6-i2c";
 104                                 reg = <0x8500 0x20>;
 105                                 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 106                                 #address-cells = <1>;
 107                                 #size-cells = <0>;
 108                                 status = "disabled";
 109                         };
 110
 111                         saradc: adc@8680 {
 112                                 compatible = "amlogic,meson-saradc";
 113                                 reg = <0x8680 0x34>;
 114                                 #io-channel-cells = <1>;
 115                                 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 116                                 status = "disabled";
 117                         };
 118
 119                         uart_C: serial@8700 {
 120                                 compatible = "amlogic,meson-uart";
 121                                 reg = <0x8700 0x18>;
 122                                 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 123                                 status = "disabled";
 124                         };
 125
 126                         i2c_B: i2c@87c0 {
 127                                 compatible = "amlogic,meson6-i2c";
 128                                 reg = <0x87c0 0x20>;
 129                                 interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
 130                                 #address-cells = <1>;
 131                                 #size-cells = <0>;
 132                                 status = "disabled";
 133                         };
 134
 135                         usb0_phy: phy@8800 {
 136                                 compatible = "amlogic,meson-mx-usb2-phy";
 137                                 #phy-cells = <0>;
 138                                 reg = <0x8800 0x20>;
 139                                 status = "disabled";
 140                         };
 141
 142                         usb1_phy: phy@8820 {
 143                                 compatible = "amlogic,meson-mx-usb2-phy";
 144                                 #phy-cells = <0>;
 145                                 reg = <0x8820 0x20>;
 146                                 status = "disabled";
 147                         };
 148
 149                         spifc: spi@8c80 {
 150                                 compatible = "amlogic,meson6-spifc";
 151                                 reg = <0x8c80 0x80>;
 152                                 #address-cells = <1>;
 153                                 #size-cells = <0>;
 154                                 status = "disabled";
 155                         };
 156
 157                         wdt: watchdog@9900 {
 158                                 compatible = "amlogic,meson6-wdt";
 159                                 reg = <0x9900 0x8>;
 160                                 interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 161                         };
 162
 163                         timer@9940 {
 164                                 compatible = "amlogic,meson6-timer";
 165                                 reg = <0x9940 0x18>;
 166                                 interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
 167                         };
 168                 };
 169
 170                 aobus: aobus@c8100000 {
 171                         compatible = "simple-bus";
 172                         reg = <0xc8100000 0x100000>;
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         ranges = <0x0 0xc8100000 0x100000>;
 176
 177                         ir_receiver: ir-receiver@480 {
 178                                 compatible= "amlogic,meson6-ir";
 179                                 reg = <0x480 0x20>;
 180                                 interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
 181                                 status = "disabled";
 182                         };
 183
 184                         uart_AO: serial@4c0 {
 185                                 compatible = "amlogic,meson-uart";
 186                                 reg = <0x4c0 0x18>;
 187                                 interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 188                                 status = "disabled";
 189                         };
 190
 191                         i2c_AO: i2c@500 {
 192                                 compatible = "amlogic,meson6-i2c";
 193                                 reg = <0x500 0x20>;
 194                                 interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
 195                                 #address-cells = <1>;
 196                                 #size-cells = <0>;
 197                                 status = "disabled";
 198                         };
 199                 };
 200
 201                 usb0: usb@c9040000 {
 202                         compatible = "snps,dwc2";
 203                         #address-cells = <1>;
 204                         #size-cells = <0>;
 205                         reg = <0xc9040000 0x40000>;
 206                         interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
 207                         phys = <&usb0_phy>;
 208                         phy-names = "usb2-phy";
 209                         dr_mode = "host";
 210                         status = "disabled";
 211                 };
 212
 213                 usb1: usb@c90c0000 {
 214                         compatible = "snps,dwc2";
 215                         #address-cells = <1>;
 216                         #size-cells = <0>;
 217                         reg = <0xc90c0000 0x40000>;
 218                         interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
 219                         phys = <&usb1_phy>;
 220                         phy-names = "usb2-phy";
 221                         dr_mode = "host";
 222                         status = "disabled";
 223                 };
 224
 225                 ethmac: ethernet@c9410000 {
 226                         compatible = "amlogic,meson6-dwmac", "snps,dwmac";
 227                         reg = <0xc9410000 0x10000
 228                                0xc1108108 0x4>;
 229                         interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
 230                         interrupt-names = "macirq";
 231                         status = "disabled";
 232                 };
 233         };
 234 }; /* end of / */