arch/arm/boot/dts/omap3-cm-t3730.dts

   1 /*
   2  * Support for CompuLab CM-T3730
   3  */
   4 /dts-v1/;
   5
   6 #include "omap36xx.dtsi"
   7 #include "omap3-cm-t3x30.dtsi"
   8
   9 / {
  10         model = "CompuLab CM-T3730";
  11         compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
  12
  13         wl12xx_vmmc2: wl12xx_vmmc2 {
  14                 compatible = "regulator-fixed";
  15                 regulator-name = "vw1271";
  16                 pinctrl-names = "default";
  17                 pinctrl-0 = <&wl12xx_gpio>;
  18                 regulator-min-microvolt = <1800000>;
  19                 regulator-max-microvolt = <1800000>;
  20                 gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
  21                 startup-delay-us = <20000>;
  22                 enable-active-high;
  23         };
  24
  25         wl12xx_vaux2: wl12xx_vaux2 {
  26                 compatible = "regulator-fixed";
  27                 regulator-name = "vwl1271_vaux2";
  28                 regulator-min-microvolt = <1800000>;
  29                 regulator-max-microvolt = <1800000>;
  30                 vin-supply = <&vaux2>;
  31         };
  32 };
  33
  34 &omap3_pmx_core {
  35         mmc1_pins: pinmux_mmc1_pins {
  36                 pinctrl-single,pins = <
  37                         0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
  38                         0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd.sdmmc1_cmd */
  39                         0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0.sdmmc1_dat0 */
  40                         0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1.sdmmc1_dat1 */
  41                         0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2.sdmmc1_dat2 */
  42                         0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3.sdmmc1_dat3 */
  43                 >;
  44         };
  45
  46         mmc2_pins: pinmux_mmc2_pins {
  47                 pinctrl-single,pins = <
  48                         0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
  49                         0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
  50                         0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0.sdmmc2_dat0 */
  51                         0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1.sdmmc2_dat1 */
  52                         0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2.sdmmc2_dat2 */
  53                         0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3.sdmmc2_dat3 */
  54                 >;
  55         };
  56
  57         smsc1_pins: pinmux_smsc1_pins {
  58                 pinctrl-single,pins = <
  59                         0x88 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_ncs5.gpmc_ncs5 */
  60                         0x16a (PIN_INPUT_PULLUP | MUX_MODE4)    /* uart3_cts_rctx.gpio_163 */
  61                 >;
  62         };
  63
  64         uart3_pins: pinmux_uart3_pins {
  65                 pinctrl-single,pins = <
  66                         0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx_irrx.uart3_rx_irrx */
  67                         0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx_irtx.uart3_tx_irtx */
  68                 >;
  69         };
  70
  71         wl12xx_gpio: pinmux_wl12xx_gpio {
  72                 pinctrl-single,pins = <
  73                         0xb2 (PIN_OUTPUT | MUX_MODE4)           /* dss_data3.gpio_73 */
  74                         0x134 (PIN_INPUT | MUX_MODE4)           /* sdmmc2_dat4.gpio_136 */
  75                 >;
  76         };
  77 };
  78
  79 &mmc1 {
  80         vmmc-supply = <&vmmc1>;
  81         bus-width = <4>;
  82         pinctrl-names = "default";
  83         pinctrl-0 = <&mmc1_pins>;
  84 };
  85
  86 &mmc2 {
  87         pinctrl-names = "default";
  88         pinctrl-0 = <&mmc2_pins>;
  89         vmmc-supply = <&wl12xx_vmmc2>;
  90         vmmc_aux-supply = <&wl12xx_vaux2>;
  91         non-removable;
  92         bus-width = <4>;
  93         cap-power-off-card;
  94 };
  95
  96 &smsc1 {
  97         pinctrl-names = "default";
  98         pinctrl-0 = <&smsc1_pins>;
  99 };
 100
 101 &uart3 {
 102         pinctrl-names = "default";
 103         pinctrl-0 = <&uart3_pins>;
 104 };