arch/arm/boot/dts/omap3-igep0020-common.dtsi

   1 /*
   2  * Common Device Tree Source for IGEPv2
   3  *
   4  * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
   5  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include "omap3-igep.dtsi"
  13 #include "omap-gpmc-smsc9221.dtsi"
  14
  15 / {
  16
  17         leds {
  18                 pinctrl-names = "default";
  19                 pinctrl-0 = <&leds_pins>;
  20                 compatible = "gpio-leds";
  21
  22                 boot {
  23                          label = "omap3:green:boot";
  24                          gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  25                          default-state = "on";
  26                 };
  27
  28                 user0 {
  29                          label = "omap3:red:user0";
  30                          gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
  31                          default-state = "off";
  32                 };
  33
  34                 user1 {
  35                          label = "omap3:red:user1";
  36                          gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
  37                          default-state = "off";
  38                 };
  39
  40                 user2 {
  41                         label = "omap3:green:user1";
  42                         gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
  43                 };
  44         };
  45
  46         /* HS USB Port 1 Power */
  47         hsusb1_power: hsusb1_power_reg {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "hsusb1_vbus";
  50                 regulator-min-microvolt = <3300000>;
  51                 regulator-max-microvolt = <3300000>;
  52                 gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;  /* GPIO LEDA */
  53                 startup-delay-us = <70000>;
  54         };
  55
  56         /* HS USB Host PHY on PORT 1 */
  57         hsusb1_phy: hsusb1_phy {
  58                 compatible = "usb-nop-xceiv";
  59                 reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
  60                 vcc-supply = <&hsusb1_power>;
  61         };
  62
  63         tfp410: encoder@0 {
  64                 compatible = "ti,tfp410";
  65                 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
  66
  67                 ports {
  68                         #address-cells = <1>;
  69                         #size-cells = <0>;
  70
  71                         port@0 {
  72                                 reg = <0>;
  73
  74                                 tfp410_in: endpoint@0 {
  75                                         remote-endpoint = <&dpi_out>;
  76                                 };
  77                         };
  78
  79                         port@1 {
  80                                 reg = <1>;
  81
  82                                 tfp410_out: endpoint@0 {
  83                                         remote-endpoint = <&dvi_connector_in>;
  84                                 };
  85                         };
  86                 };
  87         };
  88
  89         dvi0: connector@0 {
  90                 compatible = "dvi-connector";
  91                 label = "dvi";
  92
  93                 digital;
  94
  95                 ddc-i2c-bus = <&i2c3>;
  96
  97                 port {
  98                         dvi_connector_in: endpoint {
  99                                 remote-endpoint = <&tfp410_out>;
 100                         };
 101                 };
 102         };
 103 };
 104
 105 &omap3_pmx_core {
 106         pinctrl-names = "default";
 107         pinctrl-0 = <
 108                 &tfp410_pins
 109                 &dss_dpi_pins
 110         >;
 111
 112         tfp410_pins: pinmux_tfp410_pins {
 113                 pinctrl-single,pins = <
 114                         0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
 115                 >;
 116         };
 117
 118         dss_dpi_pins: pinmux_dss_dpi_pins {
 119                 pinctrl-single,pins = <
 120                         0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 121                         0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
 122                         0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
 123                         0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
 124                         0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
 125                         0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
 126                         0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
 127                         0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
 128                         0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
 129                         0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
 130                         0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
 131                         0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
 132                         0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
 133                         0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
 134                         0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
 135                         0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
 136                         0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
 137                         0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
 138                         0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
 139                         0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
 140                         0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
 141                         0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
 142                         0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
 143                         0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
 144                         0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
 145                         0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
 146                         0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 147                         0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 148                 >;
 149         };
 150
 151         uart2_pins: pinmux_uart2_pins {
 152                 pinctrl-single,pins = <
 153                         OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)        /* uart2_cts.uart2_cts */
 154                         OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)       /* uart2_rts .uart2_rts*/
 155                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)       /* uart2_tx.uart2_tx */
 156                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)        /* uart2_rx.uart2_rx */
 157                 >;
 158         };
 159 };
 160
 161 &omap3_pmx_core2 {
 162         pinctrl-names = "default";
 163         pinctrl-0 = <
 164                 &hsusbb1_pins
 165         >;
 166
 167         hsusbb1_pins: pinmux_hsusbb1_pins {
 168                 pinctrl-single,pins = <
 169                         OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)            /* etk_ctl.hsusb1_clk */
 170                         OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)            /* etk_clk.hsusb1_stp */
 171                         OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d8.hsusb1_dir */
 172                         OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d9.hsusb1_nxt */
 173                         OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d0.hsusb1_data0 */
 174                         OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d1.hsusb1_data1 */
 175                         OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d2.hsusb1_data2 */
 176                         OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d3.hsusb1_data7 */
 177                         OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d4.hsusb1_data4 */
 178                         OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d5.hsusb1_data5 */
 179                         OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d6.hsusb1_data6 */
 180                         OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d7.hsusb1_data3 */
 181                 >;
 182         };
 183
 184         leds_pins: pinmux_leds_pins {
 185                 pinctrl-single,pins = <
 186                         OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
 187                         OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
 188                         OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
 189                 >;
 190         };
 191 };
 192
 193 &i2c3 {
 194         clock-frequency = <100000>;
 195
 196         /*
 197          * Display monitor features are burnt in the EEPROM
 198          * as EDID data.
 199          */
 200         eeprom@50 {
 201                 compatible = "ti,eeprom";
 202                 reg = <0x50>;
 203         };
 204 };
 205
 206 &gpmc {
 207         ranges = <0 0 0x00000000 0x20000000>,
 208                  <5 0 0x2c000000 0x01000000>;
 209
 210         ethernet@gpmc {
 211                 pinctrl-names = "default";
 212                 pinctrl-0 = <&smsc9221_pins>;
 213                 reg = <5 0 0xff>;
 214                 interrupt-parent = <&gpio6>;
 215                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 216         };
 217 };
 218
 219 &uart2 {
 220         pinctrl-names = "default";
 221         pinctrl-0 = <&uart2_pins>;
 222 };
 223
 224 &usbhshost {
 225         port1-mode = "ehci-phy";
 226 };
 227
 228 &usbhsehci {
 229         phys = <&hsusb1_phy>;
 230 };
 231
 232 &vpll2 {
 233         /* Needed for DSS */
 234         regulator-name = "vdds_dsi";
 235 };
 236
 237 &dss {
 238         status = "ok";
 239
 240         port {
 241                 dpi_out: endpoint {
 242                         remote-endpoint = <&tfp410_in>;
 243                         data-lines = <24>;
 244                 };
 245         };
 246 };