arch/arm/boot/dts/omap3-igep0030-common.dtsi

   1 /*
   2  * Common Device Tree Source for IGEP COM MODULE
   3  *
   4  * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
   5  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include "omap3-igep.dtsi"
  13
  14 / {
  15         leds: gpio_leds {
  16                 compatible = "gpio-leds";
  17
  18                 user0 {
  19                          label = "omap3:red:user0";
  20                          gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;        /* LEDA */
  21                          default-state = "off";
  22                 };
  23
  24                 user1 {
  25                          label = "omap3:green:user1";
  26                          gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;        /* LEDB */
  27                          default-state = "off";
  28                 };
  29
  30                 user2 {
  31                          label = "omap3:red:user1";
  32                          gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;           /* gpio_16 */
  33                          default-state = "off";
  34                 };
  35         };
  36
  37         hsusb2_phy: hsusb2_phy {
  38                 compatible = "usb-nop-xceiv";
  39                 reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;              /* gpio_54 */
  40                 #phy-cells = <0>;
  41         };
  42 };
  43
  44 &omap3_pmx_core {
  45         pinctrl-names = "default";
  46         pinctrl-0 = <&hsusb2_pins>;
  47
  48         hsusb2_pins: pinmux_hsusb2_pins {
  49                 pinctrl-single,pins = <
  50                         OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
  51                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
  52                         OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
  53                         OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
  54                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
  55                         OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
  56                 >;
  57         };
  58
  59         uart2_pins: pinmux_uart2_pins {
  60                 pinctrl-single,pins = <
  61                         OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)        /* mcbsp3_dx.uart2_cts */
  62                         OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)       /* mcbsp3_dr.uart2_rts */
  63                         OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)       /* mcbsp3_clk.uart2_tx */
  64                         OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)        /* mcbsp3_fsx.uart2_rx */
  65                 >;
  66         };
  67 };
  68
  69 &omap3_pmx_core2 {
  70         pinctrl-names = "default";
  71         pinctrl-0 = <&hsusb2_core2_pins>;
  72
  73         hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
  74                 pinctrl-single,pins = <
  75                         OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)                  /* etk_d10.hsusb2_clk */
  76                         OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)                  /* etk_d11.hsusb2_stp */
  77                         OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
  78                         OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
  79                         OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
  80                         OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
  81                 >;
  82         };
  83
  84         leds_core2_pins: pinmux_leds_core2_pins {
  85                 pinctrl-single,pins = <
  86                         OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)    /* etk_d2.gpio_16 */
  87                 >;
  88         };
  89 };
  90
  91 &usbhshost {
  92         port2-mode = "ehci-phy";
  93 };
  94
  95 &usbhsehci {
  96         phys = <0 &hsusb2_phy>;
  97 };
  98
  99 &uart2 {
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&uart2_pins>;
 102 };
 103
 104 &gpmc {
 105         ranges = <0 0 0x30000000 0x01000000>;   /* CS0: 16MB for NAND */
 106 };