arch/arm/boot/dts/omap3-zoom3.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5 /dts-v1/;
   6
   7 #include "omap36xx.dtsi"
   8 #include "omap-zoom-common.dtsi"
   9
  10 / {
  11         model = "TI Zoom3";
  12         compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
  13
  14         cpus {
  15                 cpu@0 {
  16                         cpu0-supply = <&vcc>;
  17                 };
  18         };
  19
  20         memory@80000000 {
  21                 device_type = "memory";
  22                 reg = <0x80000000 0x20000000>; /* 512 MB */
  23         };
  24
  25         vddvario: regulator-vddvario {
  26                   compatible = "regulator-fixed";
  27                   regulator-name = "vddvario";
  28                   regulator-always-on;
  29         };
  30
  31         vdd33a: regulator-vdd33a {
  32                 compatible = "regulator-fixed";
  33                 regulator-name = "vdd33a";
  34                 regulator-always-on;
  35         };
  36
  37         wl12xx_vmmc: wl12xx_vmmc {
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&wl12xx_gpio>;
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vwl1271";
  42                 regulator-min-microvolt = <1800000>;
  43                 regulator-max-microvolt = <1800000>;
  44                 gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;     /* gpio101 */
  45                 startup-delay-us = <70000>;
  46                 enable-active-high;
  47         };
  48 };
  49
  50 &omap3_pmx_core {
  51         /* REVISIT: twl gpio0 is mmc0_cd */
  52         mmc1_pins: pinmux_mmc1_pins {
  53                 pinctrl-single,pins = <
  54                         OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* sdmmc1_clk.sdmmc1_clk */
  55                         OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* sdmmc1_cmd.sdmmc1_cmd */
  56                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
  57                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
  58                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
  59                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
  60                 >;
  61         };
  62
  63         mmc2_pins: pinmux_mmc2_pins {
  64                 pinctrl-single,pins = <
  65                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
  66                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
  67                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat0.sdmmc2_dat0 */
  68                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat1.sdmmc2_dat1 */
  69                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat2.sdmmc2_dat2 */
  70                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat3.sdmmc2_dat3 */
  71                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat4.sdmmc2_dat4 */
  72                         OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat5.sdmmc2_dat5 */
  73                         OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat6.sdmmc2_dat6 */
  74                         OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)                /* sdmmc2_dat7.sdmmc2_dat7 */
  75                 >;
  76         };
  77
  78         mmc3_pins: pinmux_mmc3_pins {
  79                 pinctrl-single,pins = <
  80                         OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)        /* mcbsp1_clkx.gpio_162 WLAN IRQ */
  81                         OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
  82                 >;
  83         };
  84
  85         uart1_pins: pinmux_uart1_pins {
  86                 pinctrl-single,pins = <
  87                         OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)                /* uart1_cts.uart1_cts */
  88                         OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)               /* uart1_rts.uart1_rts */
  89                         OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
  90                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)               /* uart1_tx.uart1_tx */
  91                 >;
  92         };
  93
  94         uart2_pins: pinmux_uart2_pins {
  95                 pinctrl-single,pins = <
  96                         OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
  97                         OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)               /* uart2_rts.uart2_rts */
  98                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx.uart2_rx */
  99                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx.uart2_tx */
 100                 >;
 101         };
 102
 103         uart3_pins: pinmux_uart3_pins {
 104                 pinctrl-single,pins = <
 105                         OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* uart3_cts_rctx.uart3_cts_rctx */
 106                         OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)               /* uart3_rts_sd.uart3_rts_sd */
 107                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)                /* uart3_rx_irrx.uart3_rx_irrx */
 108                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx_irtx.uart3_tx_irtx */
 109                 >;
 110         };
 111
 112         /* wl12xx GPIO output for WLAN_EN */
 113         wl12xx_gpio: pinmux_wl12xx_gpio {
 114                 pinctrl-single,pins = <
 115                         OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)                /* cam_d2.gpio_101 */
 116                 >;
 117         };
 118 };
 119
 120 &omap3_pmx_core2 {
 121         mmc3_2_pins: pinmux_mmc3_2_pins {
 122                 pinctrl-single,pins = <
 123                         OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_clk.sdmmc3_clk */
 124                         OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d4.sdmmc3_dat0 */
 125                         OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d5.sdmmc3_dat1 */
 126                         OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d6.sdmmc3_dat2 */
 127                         OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d3.sdmmc3_dat3 */
 128                 >;
 129         };
 130 };
 131
 132 &omap3_pmx_wkup {
 133         wlan_host_wkup: pinmux_wlan_host_wkup_pins {
 134                 pinctrl-single,pins = <
 135                         OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)  /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
 136                 >;
 137         };
 138 };
 139
 140 &i2c1 {
 141         clock-frequency = <2600000>;
 142
 143         twl: twl@48 {
 144                 reg = <0x48>;
 145                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 146                 interrupt-parent = <&intc>;
 147         };
 148 };
 149
 150 #include "twl4030.dtsi"
 151
 152 &i2c2 {
 153         clock-frequency = <400000>;
 154 };
 155
 156 &i2c3 {
 157         clock-frequency = <400000>;
 158
 159         /*
 160          * TVP5146 Video decoder-in for analog input support.
 161          */
 162         tvp5146@5c {
 163                 compatible = "ti,tvp5146m2";
 164                 reg = <0x5c>;
 165         };
 166 };
 167
 168 &twl_gpio {
 169         ti,use-leds;
 170 };
 171
 172 &mmc1 {
 173         vmmc-supply = <&vmmc1>;
 174         vqmmc-supply = <&vsim>;
 175         bus-width = <4>;
 176         pinctrl-names = "default";
 177         pinctrl-0 = <&mmc1_pins>;
 178 };
 179 /*
 180 &mmc2 {
 181         vmmc-supply = <&vmmc2>;
 182         ti,non-removable;
 183         bus-width = <8>;
 184         pinctrl-names = "default";
 185         pinctrl-0 = <&mmc2_pins>;
 186 };
 187 */
 188 &mmc3 {
 189         vmmc-supply = <&wl12xx_vmmc>;
 190         non-removable;
 191         bus-width = <4>;
 192         cap-power-off-card;
 193         pinctrl-names = "default";
 194         pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
 195
 196         #address-cells = <1>;
 197         #size-cells = <0>;
 198         wlcore: wlcore@2 {
 199                 compatible = "ti,wl1271";
 200                 reg = <2>;
 201                 interrupt-parent = <&gpio6>;
 202                 interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
 203                 ref-clock-frequency = <26000000>;
 204         };
 205 };
 206
 207 &uart1 {
 208        pinctrl-names = "default";
 209        pinctrl-0 = <&uart1_pins>;
 210 };
 211
 212 &uart2 {
 213        pinctrl-names = "default";
 214        pinctrl-0 = <&uart2_pins>;
 215 };
 216
 217 &uart3 {
 218        pinctrl-names = "default";
 219        pinctrl-0 = <&uart3_pins>;
 220 };
 221
 222 &uart4 {
 223        status = "disabled";
 224 };
 225
 226 &usb_otg_hs {
 227         interface-type = <0>;
 228         usb-phy = <&usb2_phy>;
 229         mode = <3>;
 230         power = <50>;
 231 };