arch/arm/boot/dts/omap4-panda-common.dtsi

   1 /*
   2  * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 #include <dt-bindings/input/input.h>
   9 #include "elpida_ecb240abacn.dtsi"
  10
  11 / {
  12         memory@80000000 {
  13                 device_type = "memory";
  14                 reg = <0x80000000 0x40000000>; /* 1 GB */
  15         };
  16
  17         chosen {
  18                 stdout-path = &uart3;
  19         };
  20
  21         aliases {
  22                 display0 = &dvi0;
  23                 display1 = &hdmi0;
  24                 ethernet = &ethernet;
  25         };
  26
  27         leds: leds {
  28                 compatible = "gpio-leds";
  29                 pinctrl-names = "default";
  30                 pinctrl-0 = <
  31                         &led_wkgpio_pins
  32                 >;
  33
  34                 heartbeat {
  35                         label = "pandaboard::status1";
  36                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  37                         linux,default-trigger = "heartbeat";
  38                 };
  39
  40                 mmc {
  41                         label = "pandaboard::status2";
  42                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  43                         linux,default-trigger = "mmc0";
  44                 };
  45         };
  46
  47         gpio_keys: gpio_keys {
  48                 compatible = "gpio-keys";
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <
  51                         &button_pins
  52                 >;
  53
  54                 buttonS2 {
  55                         label = "button S2";
  56                         gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;    /* gpio_121 */
  57                         linux,code = <BTN_0>;
  58                         wakeup-source;
  59                 };
  60         };
  61
  62         sound: sound {
  63                 compatible = "ti,abe-twl6040";
  64                 ti,model = "PandaBoard";
  65
  66                 ti,mclk-freq = <38400000>;
  67
  68                 ti,mcpdm = <&mcpdm>;
  69
  70                 ti,twl6040 = <&twl6040>;
  71
  72                 /* Audio routing */
  73                 ti,audio-routing =
  74                         "Headset Stereophone", "HSOL",
  75                         "Headset Stereophone", "HSOR",
  76                         "Ext Spk", "HFL",
  77                         "Ext Spk", "HFR",
  78                         "Line Out", "AUXL",
  79                         "Line Out", "AUXR",
  80                         "HSMIC", "Headset Mic",
  81                         "Headset Mic", "Headset Mic Bias",
  82                         "AFML", "Line In",
  83                         "AFMR", "Line In";
  84         };
  85
  86         /* HS USB Port 1 Power */
  87         hsusb1_power: hsusb1_power_reg {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "hsusb1_vbus";
  90                 regulator-min-microvolt = <3300000>;
  91                 regulator-max-microvolt = <3300000>;
  92                 gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;     /* gpio_1 */
  93                 startup-delay-us = <70000>;
  94                 enable-active-high;
  95                 /*
  96                  * boot-on is required along with always-on as the
  97                  * regulator framework doesn't enable the regulator
  98                  * if boot-on is not there.
  99                  */
 100                 regulator-always-on;
 101                 regulator-boot-on;
 102         };
 103
 104         /* HS USB Host PHY on PORT 1 */
 105         hsusb1_phy: hsusb1_phy {
 106                 compatible = "usb-nop-xceiv";
 107                 reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
 108                 #phy-cells = <0>;
 109                 vcc-supply = <&hsusb1_power>;
 110                 clocks = <&auxclk3_ck>;
 111                 clock-names = "main_clk";
 112                 clock-frequency = <19200000>;
 113         };
 114
 115         /* regulator for wl12xx on sdio5 */
 116         wl12xx_vmmc: wl12xx_vmmc {
 117                 pinctrl-names = "default";
 118                 pinctrl-0 = <&wl12xx_gpio>;
 119                 compatible = "regulator-fixed";
 120                 regulator-name = "vwl1271";
 121                 regulator-min-microvolt = <1800000>;
 122                 regulator-max-microvolt = <1800000>;
 123                 gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 124                 startup-delay-us = <70000>;
 125                 enable-active-high;
 126         };
 127
 128         tfp410: encoder0 {
 129                 compatible = "ti,tfp410";
 130                 powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;   /* gpio_0 */
 131
 132                 ports {
 133                         #address-cells = <1>;
 134                         #size-cells = <0>;
 135
 136                         port@0 {
 137                                 reg = <0>;
 138
 139                                 tfp410_in: endpoint {
 140                                         remote-endpoint = <&dpi_out>;
 141                                 };
 142                         };
 143
 144                         port@1 {
 145                                 reg = <1>;
 146
 147                                 tfp410_out: endpoint {
 148                                         remote-endpoint = <&dvi_connector_in>;
 149                                 };
 150                         };
 151                 };
 152         };
 153
 154         dvi0: connector0 {
 155                 compatible = "dvi-connector";
 156                 label = "dvi";
 157
 158                 digital;
 159
 160                 ddc-i2c-bus = <&i2c3>;
 161
 162                 port {
 163                         dvi_connector_in: endpoint {
 164                                 remote-endpoint = <&tfp410_out>;
 165                         };
 166                 };
 167         };
 168
 169         tpd12s015: encoder1 {
 170                 compatible = "ti,tpd12s015";
 171
 172                 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,   /* 60, CT CP HPD */
 173                         <&gpio2 9 GPIO_ACTIVE_HIGH>,    /* 41, LS OE */
 174                         <&gpio2 31 GPIO_ACTIVE_HIGH>;   /* 63, HPD */
 175
 176                 ports {
 177                         #address-cells = <1>;
 178                         #size-cells = <0>;
 179
 180                         port@0 {
 181                                 reg = <0>;
 182
 183                                 tpd12s015_in: endpoint {
 184                                         remote-endpoint = <&hdmi_out>;
 185                                 };
 186                         };
 187
 188                         port@1 {
 189                                 reg = <1>;
 190
 191                                 tpd12s015_out: endpoint {
 192                                         remote-endpoint = <&hdmi_connector_in>;
 193                                 };
 194                         };
 195                 };
 196         };
 197
 198         hdmi0: connector1 {
 199                 compatible = "hdmi-connector";
 200                 label = "hdmi";
 201
 202                 type = "a";
 203
 204                 port {
 205                         hdmi_connector_in: endpoint {
 206                                 remote-endpoint = <&tpd12s015_out>;
 207                         };
 208                 };
 209         };
 210 };
 211
 212 &omap4_pmx_core {
 213         pinctrl-names = "default";
 214         pinctrl-0 = <
 215                         &dss_dpi_pins
 216                         &tfp410_pins
 217                         &dss_hdmi_pins
 218                         &tpd12s015_pins
 219                         &hsusbb1_pins
 220         >;
 221
 222         twl6040_pins: pinmux_twl6040_pins {
 223                 pinctrl-single,pins = <
 224                         OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)      /* hdq_sio.gpio_127 */
 225                         OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)       /* sys_nirq2.sys_nirq2 */
 226                 >;
 227         };
 228
 229         mcpdm_pins: pinmux_mcpdm_pins {
 230                 pinctrl-single,pins = <
 231                         OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_pdm_ul_data.abe_pdm_ul_data */
 232                         OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_pdm_dl_data.abe_pdm_dl_data */
 233                         OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)      /* abe_pdm_frame.abe_pdm_frame */
 234                         OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_pdm_lb_clk.abe_pdm_lb_clk */
 235                         OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_clks.abe_clks */
 236                 >;
 237         };
 238
 239         mcbsp1_pins: pinmux_mcbsp1_pins {
 240                 pinctrl-single,pins = <
 241                         OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)               /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 242                         OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_mcbsp1_dr.abe_mcbsp1_dr */
 243                         OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)     /* abe_mcbsp1_dx.abe_mcbsp1_dx */
 244                         OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)               /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 245                 >;
 246         };
 247
 248         dss_dpi_pins: pinmux_dss_dpi_pins {
 249                 pinctrl-single,pins = <
 250                         OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data23 */
 251                         OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data22 */
 252                         OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data21 */
 253                         OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data20 */
 254                         OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data19 */
 255                         OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data18 */
 256                         OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data15 */
 257                         OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data14 */
 258                         OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data13 */
 259                         OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data12 */
 260                         OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data11 */
 261
 262                         OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data10 */
 263                         OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data9 */
 264                         OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data16 */
 265                         OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data17 */
 266                         OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)      /* dispc2_hsync */
 267                         OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)      /* dispc2_pclk */
 268                         OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)      /* dispc2_vsync */
 269                         OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)      /* dispc2_de */
 270                         OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data8 */
 271                         OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data7 */
 272                         OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data6 */
 273                         OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data5 */
 274                         OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data4 */
 275                         OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data3 */
 276
 277                         OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data2 */
 278                         OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data1 */
 279                         OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data0 */
 280                 >;
 281         };
 282
 283         tfp410_pins: pinmux_tfp410_pins {
 284                 pinctrl-single,pins = <
 285                         OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)      /* gpio_0 */
 286                 >;
 287         };
 288
 289         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 290                 pinctrl-single,pins = <
 291                         OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)               /* hdmi_cec.hdmi_cec */
 292                         OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_scl.hdmi_scl */
 293                         OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_sda.hdmi_sda */
 294                 >;
 295         };
 296
 297         tpd12s015_pins: pinmux_tpd12s015_pins {
 298                 pinctrl-single,pins = <
 299                         OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)              /* gpmc_a17.gpio_41 */
 300                         OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)              /* gpmc_nbe1.gpio_60 */
 301                         OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)      /* hdmi_hpd.gpio_63 */
 302                 >;
 303         };
 304
 305         hsusbb1_pins: pinmux_hsusbb1_pins {
 306                 pinctrl-single,pins = <
 307                         OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 308                         OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)              /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
 309                         OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
 310                         OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
 311                         OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
 312                         OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
 313                         OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
 314                         OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
 315                         OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
 316                         OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
 317                         OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
 318                         OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
 319                 >;
 320         };
 321
 322         i2c1_pins: pinmux_i2c1_pins {
 323                 pinctrl-single,pins = <
 324                         OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_scl */
 325                         OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_sda */
 326                 >;
 327         };
 328
 329         i2c2_pins: pinmux_i2c2_pins {
 330                 pinctrl-single,pins = <
 331                         OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c2_scl */
 332                         OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c2_sda */
 333                 >;
 334         };
 335
 336         i2c3_pins: pinmux_i2c3_pins {
 337                 pinctrl-single,pins = <
 338                         OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c3_scl */
 339                         OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c3_sda */
 340                 >;
 341         };
 342
 343         i2c4_pins: pinmux_i2c4_pins {
 344                 pinctrl-single,pins = <
 345                         OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c4_scl */
 346                         OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c4_sda */
 347                 >;
 348         };
 349
 350         /*
 351          * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
 352          * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
 353          */
 354         wl12xx_gpio: pinmux_wl12xx_gpio {
 355                 pinctrl-single,pins = <
 356                         OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)              /* gpmc_a19.gpio_43 */
 357                         OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)              /* gpmc_a22.gpio_46 */
 358                         OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)       /* gpmc_a24.gpio_48 */
 359                         OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)       /* gpmc_a25.gpio_49 */
 360                 >;
 361         };
 362
 363         /* wl12xx GPIO inputs and SDIO pins */
 364         wl12xx_pins: pinmux_wl12xx_pins {
 365                 pinctrl-single,pins = <
 366                         OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)               /* gpmc_ncs2.gpio_52 */
 367                         OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)               /* gpmc_ncs3.gpio_53 */
 368                         OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_clk.sdmmc5_clk */
 369                         OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_cmd.sdmmc5_cmd */
 370                         OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat0.sdmmc5_dat0 */
 371                         OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat1.sdmmc5_dat1 */
 372                         OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat2.sdmmc5_dat2 */
 373                         OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat3.sdmmc5_dat3 */
 374                 >;
 375         };
 376
 377         button_pins: pinmux_button_pins {
 378                 pinctrl-single,pins = <
 379                         OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)        /* gpio_121 */
 380                 >;
 381         };
 382 };
 383
 384 &omap4_pmx_wkup {
 385         led_wkgpio_pins: pinmux_leds_wkpins {
 386                 pinctrl-single,pins = <
 387                         OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)      /* gpio_wk7 */
 388                         OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)      /* gpio_wk8 */
 389                 >;
 390         };
 391 };
 392
 393 &i2c1 {
 394         pinctrl-names = "default";
 395         pinctrl-0 = <&i2c1_pins>;
 396
 397         clock-frequency = <400000>;
 398
 399         twl: twl@48 {
 400                 reg = <0x48>;
 401                 /* IRQ# = 7 */
 402                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 403         };
 404
 405         twl6040: twl@4b {
 406                 compatible = "ti,twl6040";
 407                 #clock-cells = <0>;
 408                 reg = <0x4b>;
 409
 410                 pinctrl-names = "default";
 411                 pinctrl-0 = <&twl6040_pins>;
 412
 413                 /* IRQ# = 119 */
 414                 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 415                 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 416
 417                 vio-supply = <&v1v8>;
 418                 v2v1-supply = <&v2v1>;
 419                 enable-active-high;
 420         };
 421 };
 422
 423 #include "twl6030.dtsi"
 424 #include "twl6030_omap4.dtsi"
 425
 426 &i2c2 {
 427         pinctrl-names = "default";
 428         pinctrl-0 = <&i2c2_pins>;
 429
 430         clock-frequency = <400000>;
 431 };
 432
 433 &i2c3 {
 434         pinctrl-names = "default";
 435         pinctrl-0 = <&i2c3_pins>;
 436
 437         clock-frequency = <100000>;
 438
 439         /*
 440          * Display monitor features are burnt in their EEPROM as EDID data.
 441          * The EEPROM is connected as I2C slave device.
 442          */
 443         eeprom@50 {
 444                 compatible = "ti,eeprom";
 445                 reg = <0x50>;
 446         };
 447 };
 448
 449 &i2c4 {
 450         pinctrl-names = "default";
 451         pinctrl-0 = <&i2c4_pins>;
 452
 453         clock-frequency = <400000>;
 454 };
 455
 456 &mmc1 {
 457         vmmc-supply = <&vmmc>;
 458         bus-width = <8>;
 459 };
 460
 461 &mmc2 {
 462         status = "disabled";
 463 };
 464
 465 &mmc3 {
 466         status = "disabled";
 467 };
 468
 469 &mmc4 {
 470         status = "disabled";
 471 };
 472
 473 &mmc5 {
 474         pinctrl-names = "default";
 475         pinctrl-0 = <&wl12xx_pins>;
 476         vmmc-supply = <&wl12xx_vmmc>;
 477         interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
 478                                &omap4_pmx_core 0x10e>;
 479         non-removable;
 480         bus-width = <4>;
 481         cap-power-off-card;
 482
 483         #address-cells = <1>;
 484         #size-cells = <0>;
 485         wlcore: wlcore@2 {
 486                 compatible = "ti,wl1271";
 487                 reg = <2>;
 488                 interrupt-parent = <&gpio2>;
 489                 interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
 490                 ref-clock-frequency = <38400000>;
 491         };
 492 };
 493
 494 &emif1 {
 495         cs1-used;
 496         device-handle = <&elpida_ECB240ABACN>;
 497 };
 498
 499 &emif2 {
 500         cs1-used;
 501         device-handle = <&elpida_ECB240ABACN>;
 502 };
 503
 504 &mcbsp1 {
 505         pinctrl-names = "default";
 506         pinctrl-0 = <&mcbsp1_pins>;
 507         status = "okay";
 508 };
 509
 510 &mcpdm {
 511         pinctrl-names = "default";
 512         pinctrl-0 = <&mcpdm_pins>;
 513
 514         clocks = <&twl6040>;
 515         clock-names = "pdmclk";
 516
 517         status = "okay";
 518 };
 519
 520 &twl_usb_comparator {
 521         usb-supply = <&vusb>;
 522 };
 523
 524 &uart2 {
 525         interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 526                                &omap4_pmx_core OMAP4_UART2_RX>;
 527 };
 528
 529 &uart3 {
 530         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 531                                &omap4_pmx_core OMAP4_UART3_RX>;
 532 };
 533
 534 &uart4 {
 535         interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
 536                                &omap4_pmx_core OMAP4_UART4_RX>;
 537 };
 538
 539 &usb_otg_hs {
 540         interface-type = <1>;
 541         mode = <3>;
 542         power = <50>;
 543 };
 544
 545 &usbhshost {
 546         port1-mode = "ehci-phy";
 547 };
 548
 549 &usbhsehci {
 550         phys = <&hsusb1_phy>;
 551
 552         #address-cells = <1>;
 553         #size-cells = <0>;
 554
 555         hub@1 {
 556                 compatible = "usb424,9514";
 557                 reg = <1>;
 558                 #address-cells = <1>;
 559                 #size-cells = <0>;
 560
 561                 ethernet: usbether@1 {
 562                         compatible = "usb424,ec00";
 563                         reg = <1>;
 564                 };
 565         };
 566 };
 567
 568 &dss {
 569         status = "ok";
 570
 571         port {
 572                 dpi_out: endpoint {
 573                         remote-endpoint = <&tfp410_in>;
 574                         data-lines = <24>;
 575                 };
 576         };
 577 };
 578
 579 &dsi2 {
 580         status = "ok";
 581         vdd-supply = <&vcxio>;
 582 };
 583
 584 &hdmi {
 585         status = "ok";
 586         vdda-supply = <&vdac>;
 587
 588         port {
 589                 hdmi_out: endpoint {
 590                         remote-endpoint = <&tpd12s015_in>;
 591                 };
 592         };
 593 };