arch/arm/boot/dts/omap5-board-common.dtsi

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 #include "omap5.dtsi"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11
  12 / {
  13         aliases {
  14                 display0 = &hdmi0;
  15         };
  16
  17         chosen {
  18                 stdout-path = &uart3;
  19         };
  20
  21         vmain: fixedregulator-vmain {
  22                 compatible = "regulator-fixed";
  23                 regulator-name = "vmain";
  24                 regulator-min-microvolt = <5000000>;
  25                 regulator-max-microvolt = <5000000>;
  26         };
  27
  28         vsys_cobra: fixedregulator-vsys_cobra {
  29                 compatible = "regulator-fixed";
  30                 regulator-name = "vsys_cobra";
  31                 vin-supply = <&vmain>;
  32                 regulator-min-microvolt = <5000000>;
  33                 regulator-max-microvolt = <5000000>;
  34         };
  35
  36         vdds_1v8_main: fixedregulator-vdds_1v8_main {
  37                 compatible = "regulator-fixed";
  38                 regulator-name = "vdds_1v8_main";
  39                 vin-supply = <&smps7_reg>;
  40                 regulator-min-microvolt = <1800000>;
  41                 regulator-max-microvolt = <1800000>;
  42         };
  43
  44         vmmcsd_fixed: fixedregulator-mmcsd {
  45                 compatible = "regulator-fixed";
  46                 regulator-name = "vmmcsd_fixed";
  47                 regulator-min-microvolt = <3000000>;
  48                 regulator-max-microvolt = <3000000>;
  49         };
  50
  51         mmc3_pwrseq: sdhci0_pwrseq {
  52                 compatible = "mmc-pwrseq-simple";
  53                 clocks = <&clk32kgaudio>;
  54                 clock-names = "ext_clock";
  55         };
  56
  57         vmmcsdio_fixed: fixedregulator-mmcsdio {
  58                 compatible = "regulator-fixed";
  59                 regulator-name = "vmmcsdio_fixed";
  60                 regulator-min-microvolt = <1800000>;
  61                 regulator-max-microvolt = <1800000>;
  62                 gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;    /* gpio140 WLAN_EN */
  63                 enable-active-high;
  64                 startup-delay-us = <70000>;
  65                 pinctrl-names = "default";
  66                 pinctrl-0 = <&wlan_pins>;
  67         };
  68
  69         /* HS USB Host PHY on PORT 2 */
  70         hsusb2_phy: hsusb2_phy {
  71                 compatible = "usb-nop-xceiv";
  72                 reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
  73                 clocks = <&auxclk1_ck>;
  74                 clock-names = "main_clk";
  75                 clock-frequency = <19200000>;
  76                 #phy-cells = <0>;
  77         };
  78
  79         /* HS USB Host PHY on PORT 3 */
  80         hsusb3_phy: hsusb3_phy {
  81                 compatible = "usb-nop-xceiv";
  82                 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
  83                 #phy-cells = <0>;
  84         };
  85
  86         tpd12s015: encoder {
  87                 compatible = "ti,tpd12s015";
  88
  89                 pinctrl-names = "default";
  90                 pinctrl-0 = <&tpd12s015_pins>;
  91
  92                 /* gpios defined in the board specific dts */
  93
  94                 ports {
  95                         #address-cells = <1>;
  96                         #size-cells = <0>;
  97
  98                         port@0 {
  99                                 reg = <0>;
 100
 101                                 tpd12s015_in: endpoint {
 102                                         remote-endpoint = <&hdmi_out>;
 103                                 };
 104                         };
 105
 106                         port@1 {
 107                                 reg = <1>;
 108
 109                                 tpd12s015_out: endpoint {
 110                                         remote-endpoint = <&hdmi_connector_in>;
 111                                 };
 112                         };
 113                 };
 114         };
 115
 116         hdmi0: connector {
 117                 compatible = "hdmi-connector";
 118                 label = "hdmi";
 119
 120                 type = "b";
 121
 122                 port {
 123                         hdmi_connector_in: endpoint {
 124                                 remote-endpoint = <&tpd12s015_out>;
 125                         };
 126                 };
 127         };
 128
 129         sound: sound {
 130                 compatible = "ti,abe-twl6040";
 131                 ti,model = "omap5-uevm";
 132
 133                 ti,jack-detection;
 134                 ti,mclk-freq = <19200000>;
 135
 136                 ti,mcpdm = <&mcpdm>;
 137
 138                 ti,twl6040 = <&twl6040>;
 139
 140                 /* Audio routing */
 141                 ti,audio-routing =
 142                         "Headset Stereophone", "HSOL",
 143                         "Headset Stereophone", "HSOR",
 144                         "Line Out", "AUXL",
 145                         "Line Out", "AUXR",
 146                         "HSMIC", "Headset Mic",
 147                         "Headset Mic", "Headset Mic Bias",
 148                         "AFML", "Line In",
 149                         "AFMR", "Line In";
 150         };
 151 };
 152
 153 &gpio8 {
 154         /* TI trees use GPIO instead of msecure, see also muxing */
 155         p234 {
 156                 gpio-hog;
 157                 gpios = <10 GPIO_ACTIVE_HIGH>;
 158                 output-high;
 159                 line-name = "gpio8_234/msecure";
 160         };
 161 };
 162
 163 &omap5_pmx_core {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <
 166                         &usbhost_pins
 167                         &led_gpio_pins
 168         >;
 169
 170         twl6040_pins: pinmux_twl6040_pins {
 171                 pinctrl-single,pins = <
 172                         OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)      /* mcspi1_somi.gpio5_141 */
 173                 >;
 174         };
 175
 176         mcpdm_pins: pinmux_mcpdm_pins {
 177                 pinctrl-single,pins = <
 178                         OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_clks.abe_clks */
 179                         OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_ul_data.abemcpdm_ul_data */
 180                         OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_dl_data.abemcpdm_dl_data */
 181                         OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)        /* abemcpdm_frame.abemcpdm_frame */
 182                         OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_lb_clk.abemcpdm_lb_clk */
 183                 >;
 184         };
 185
 186         mcbsp1_pins: pinmux_mcbsp1_pins {
 187                 pinctrl-single,pins = <
 188                         OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)               /* abedmic_clk2.abemcbsp1_fsx */
 189                         OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)     /* abedmic_clk3.abemcbsp1_dx */
 190                         OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)               /* abeslimbus1_clock.abemcbsp1_clkx */
 191                         OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* abeslimbus1_data.abemcbsp1_dr */
 192                 >;
 193         };
 194
 195         mcbsp2_pins: pinmux_mcbsp2_pins {
 196                 pinctrl-single,pins = <
 197                         OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcbsp2_dr.abemcbsp2_dr */
 198                         OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)     /* abemcbsp2_dx.abemcbsp2_dx */
 199                         OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)               /* abemcbsp2_fsx.abemcbsp2_fsx */
 200                         OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)               /* abemcbsp2_clkx.abemcbsp2_clkx */
 201                 >;
 202         };
 203
 204         i2c1_pins: pinmux_i2c1_pins {
 205                 pinctrl-single,pins = <
 206                         OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_scl */
 207                         OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_sda */
 208                 >;
 209         };
 210
 211         mcspi2_pins: pinmux_mcspi2_pins {
 212                 pinctrl-single,pins = <
 213                         OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)               /*  mcspi2_clk */
 214                         OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)               /*  mcspi2_simo */
 215                         OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)        /*  mcspi2_somi */
 216                         OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)              /*  mcspi2_cs0 */
 217                 >;
 218         };
 219
 220         mcspi3_pins: pinmux_mcspi3_pins {
 221                 pinctrl-single,pins = <
 222                         OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)               /*  mcspi3_somi */
 223                         OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)               /*  mcspi3_cs0 */
 224                         OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)               /*  mcspi3_simo */
 225                         OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)               /*  mcspi3_clk */
 226                 >;
 227         };
 228
 229         mmc3_pins: pinmux_mmc3_pins {
 230                 pinctrl-single,pins = <
 231                         OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 232                         OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
 233                         OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
 234                         OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
 235                         OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
 236                         OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
 237                 >;
 238         };
 239
 240         wlan_pins: pinmux_wlan_pins {
 241                 pinctrl-single,pins = <
 242                         OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
 243                 >;
 244         };
 245
 246         /* TI trees use GPIO mode; msecure mode does not work reliably? */
 247         palmas_msecure_pins: palmas_msecure_pins {
 248                 pinctrl-single,pins = <
 249                         OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
 250                 >;
 251         };
 252
 253         usbhost_pins: pinmux_usbhost_pins {
 254                 pinctrl-single,pins = <
 255                         OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
 256                         OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
 257
 258                         OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
 259                         OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
 260
 261                         OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
 262                         OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
 263                 >;
 264         };
 265
 266         led_gpio_pins: pinmux_led_gpio_pins {
 267                 pinctrl-single,pins = <
 268                         OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
 269                 >;
 270         };
 271
 272         uart1_pins: pinmux_uart1_pins {
 273                 pinctrl-single,pins = <
 274                         OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
 275                         OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
 276                         OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
 277                         OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
 278                 >;
 279         };
 280
 281         uart3_pins: pinmux_uart3_pins {
 282                 pinctrl-single,pins = <
 283                         OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
 284                         OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
 285                 >;
 286         };
 287
 288         uart5_pins: pinmux_uart5_pins {
 289                 pinctrl-single,pins = <
 290                         OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
 291                         OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
 292                         OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
 293                         OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
 294                 >;
 295         };
 296
 297         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 298                 pinctrl-single,pins = <
 299                         OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)       /* hdmi_cec.hdmi_cec */
 300                         OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)       /* hdmi_ddc_scl.hdmi_ddc_scl */
 301                         OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)       /* hdmi_ddc_sda.hdmi_ddc_sda */
 302                 >;
 303         };
 304
 305         tpd12s015_pins: pinmux_tpd12s015_pins {
 306                 pinctrl-single,pins = <
 307                         OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)      /* hdmi_hpd.gpio7_193 */
 308                 >;
 309         };
 310 };
 311
 312 &omap5_pmx_wkup {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <
 315                         &usbhost_wkup_pins
 316         >;
 317
 318         palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
 319                 pinctrl-single,pins = <
 320                         /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
 321                         OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
 322                 >;
 323         };
 324
 325         usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 326                 pinctrl-single,pins = <
 327                         OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
 328                 >;
 329         };
 330
 331         wlcore_irq_pin: pinmux_wlcore_irq_pin {
 332                 pinctrl-single,pins = <
 333                         OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)        /* llia_wakereqin.gpio1_wk14 */
 334                 >;
 335         };
 336 };
 337
 338 &mmc1 {
 339         vmmc-supply = <&ldo9_reg>;
 340         bus-width = <4>;
 341 };
 342
 343 &mmc2 {
 344         vmmc-supply = <&vmmcsd_fixed>;
 345         bus-width = <8>;
 346         ti,non-removable;
 347 };
 348
 349 &mmc3 {
 350         vmmc-supply = <&vmmcsdio_fixed>;
 351         mmc-pwrseq = <&mmc3_pwrseq>;
 352         bus-width = <4>;
 353         non-removable;
 354         cap-power-off-card;
 355         pinctrl-names = "default";
 356         pinctrl-0 = <&mmc3_pins>;
 357         interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 358                                &omap5_pmx_core 0x16a>;
 359
 360         #address-cells = <1>;
 361         #size-cells = <0>;
 362         wlcore: wlcore@2 {
 363                 compatible = "ti,wl1271";
 364                 reg = <2>;
 365                 pinctrl-names = "default";
 366                 pinctrl-0 = <&wlcore_irq_pin>;
 367                 interrupt-parent = <&gpio1>;
 368                 interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */
 369                 ref-clock-frequency = <26000000>;
 370         };
 371 };
 372
 373 &mmc4 {
 374         status = "disabled";
 375 };
 376
 377 &mmc5 {
 378         status = "disabled";
 379 };
 380
 381 &i2c1 {
 382         pinctrl-names = "default";
 383         pinctrl-0 = <&i2c1_pins>;
 384
 385         clock-frequency = <400000>;
 386
 387         palmas: palmas@48 {
 388                 compatible = "ti,palmas";
 389                 /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
 390                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
 391                 reg = <0x48>;
 392                 interrupt-controller;
 393                 #interrupt-cells = <2>;
 394                 ti,system-power-controller;
 395                 ti,mux-pad1 = <0xa1>;
 396                 ti,mux-pad2 = <0x1b>;
 397                 pinctrl-names = "default";
 398                 pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 399
 400                 palmas_gpio: gpio {
 401                         compatible = "ti,palmas-gpio";
 402                         gpio-controller;
 403                         #gpio-cells = <2>;
 404                 };
 405
 406                 extcon_usb3: palmas_usb {
 407                         compatible = "ti,palmas-usb-vid";
 408                         ti,enable-vbus-detection;
 409                         ti,enable-id-detection;
 410                         ti,wakeup;
 411                         id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
 412                 };
 413
 414                 clk32kgaudio: palmas_clk32k@1 {
 415                         compatible = "ti,palmas-clk32kgaudio";
 416                         #clock-cells = <0>;
 417                 };
 418
 419                 rtc {
 420                         compatible = "ti,palmas-rtc";
 421                         interrupt-parent = <&palmas>;
 422                         interrupts = <8 IRQ_TYPE_NONE>;
 423                         ti,backup-battery-chargeable;
 424                         ti,backup-battery-charge-high-current;
 425                 };
 426
 427                 gpadc: gpadc {
 428                         compatible = "ti,palmas-gpadc";
 429                         interrupts = <18 0
 430                                       16 0
 431                                       17 0>;
 432                         #io-channel-cells = <1>;
 433                         ti,channel0-current-microamp = <5>;
 434                         ti,channel3-current-microamp = <10>;
 435                 };
 436
 437                 palmas_pmic {
 438                         compatible = "ti,palmas-pmic";
 439                         interrupt-parent = <&palmas>;
 440                         interrupts = <14 IRQ_TYPE_NONE>;
 441                         interrupt-names = "short-irq";
 442
 443                         ti,ldo6-vibrator;
 444
 445                         smps123-in-supply = <&vsys_cobra>;
 446                         smps45-in-supply = <&vsys_cobra>;
 447                         smps6-in-supply = <&vsys_cobra>;
 448                         smps7-in-supply = <&vsys_cobra>;
 449                         smps8-in-supply = <&vsys_cobra>;
 450                         smps9-in-supply = <&vsys_cobra>;
 451                         smps10_out2-in-supply = <&vsys_cobra>;
 452                         smps10_out1-in-supply = <&vsys_cobra>;
 453                         ldo1-in-supply = <&vsys_cobra>;
 454                         ldo2-in-supply = <&vsys_cobra>;
 455                         ldo3-in-supply = <&vdds_1v8_main>;
 456                         ldo4-in-supply = <&vdds_1v8_main>;
 457                         ldo5-in-supply = <&vsys_cobra>;
 458                         ldo6-in-supply = <&vdds_1v8_main>;
 459                         ldo7-in-supply = <&vsys_cobra>;
 460                         ldo8-in-supply = <&vsys_cobra>;
 461                         ldo9-in-supply = <&vmmcsd_fixed>;
 462                         ldoln-in-supply = <&vsys_cobra>;
 463                         ldousb-in-supply = <&vsys_cobra>;
 464
 465                         regulators {
 466                                 smps123_reg: smps123 {
 467                                         /* VDD_OPP_MPU */
 468                                         regulator-name = "smps123";
 469                                         regulator-min-microvolt = < 600000>;
 470                                         regulator-max-microvolt = <1500000>;
 471                                         regulator-always-on;
 472                                         regulator-boot-on;
 473                                 };
 474
 475                                 smps45_reg: smps45 {
 476                                         /* VDD_OPP_MM */
 477                                         regulator-name = "smps45";
 478                                         regulator-min-microvolt = < 600000>;
 479                                         regulator-max-microvolt = <1310000>;
 480                                         regulator-always-on;
 481                                         regulator-boot-on;
 482                                 };
 483
 484                                 smps6_reg: smps6 {
 485                                         /* VDD_DDR3 - over VDD_SMPS6 */
 486                                         regulator-name = "smps6";
 487                                         regulator-min-microvolt = <1350000>;
 488                                         regulator-max-microvolt = <1350000>;
 489                                         regulator-always-on;
 490                                         regulator-boot-on;
 491                                 };
 492
 493                                 smps7_reg: smps7 {
 494                                         /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 495                                         regulator-name = "smps7";
 496                                         regulator-min-microvolt = <1800000>;
 497                                         regulator-max-microvolt = <1800000>;
 498                                         regulator-always-on;
 499                                         regulator-boot-on;
 500                                 };
 501
 502                                 smps8_reg: smps8 {
 503                                         /* VDD_OPP_CORE */
 504                                         regulator-name = "smps8";
 505                                         regulator-min-microvolt = < 600000>;
 506                                         regulator-max-microvolt = <1310000>;
 507                                         regulator-always-on;
 508                                         regulator-boot-on;
 509                                 };
 510
 511                                 smps9_reg: smps9 {
 512                                         /* VDDA_2v1_AUD over VDD_2v1 */
 513                                         regulator-name = "smps9";
 514                                         regulator-min-microvolt = <2100000>;
 515                                         regulator-max-microvolt = <2100000>;
 516                                         ti,smps-range = <0x80>;
 517                                 };
 518
 519                                 smps10_out2_reg: smps10_out2 {
 520                                         /* VBUS_5V_OTG */
 521                                         regulator-name = "smps10_out2";
 522                                         regulator-min-microvolt = <5000000>;
 523                                         regulator-max-microvolt = <5000000>;
 524                                         regulator-always-on;
 525                                         regulator-boot-on;
 526                                 };
 527
 528                                 smps10_out1_reg: smps10_out1 {
 529                                         /* VBUS_5V_OTG */
 530                                         regulator-name = "smps10_out1";
 531                                         regulator-min-microvolt = <5000000>;
 532                                         regulator-max-microvolt = <5000000>;
 533                                 };
 534
 535                                 ldo1_reg: ldo1 {
 536                                         /* VDDAPHY_CAM: vdda_csiport */
 537                                         regulator-name = "ldo1";
 538                                         regulator-min-microvolt = <1800000>;
 539                                         regulator-max-microvolt = <1800000>;
 540                                 };
 541
 542                                 ldo2_reg: ldo2 {
 543                                         /* VCC_2V8_DISP: Does not go anywhere */
 544                                         regulator-name = "ldo2";
 545                                         regulator-min-microvolt = <2800000>;
 546                                         regulator-max-microvolt = <2800000>;
 547                                         /* Unused */
 548                                         status = "disabled";
 549                                 };
 550
 551                                 ldo3_reg: ldo3 {
 552                                         /* VDDAPHY_MDM: vdda_lli */
 553                                         regulator-name = "ldo3";
 554                                         regulator-min-microvolt = <1500000>;
 555                                         regulator-max-microvolt = <1500000>;
 556                                         regulator-boot-on;
 557                                         /* Only if Modem is used */
 558                                         status = "disabled";
 559                                 };
 560
 561                                 ldo4_reg: ldo4 {
 562                                         /* VDDAPHY_DISP: vdda_dsiport/hdmi */
 563                                         regulator-name = "ldo4";
 564                                         regulator-min-microvolt = <1800000>;
 565                                         regulator-max-microvolt = <1800000>;
 566                                 };
 567
 568                                 ldo5_reg: ldo5 {
 569                                         /* VDDA_1V8_PHY: usb/sata/hdmi.. */
 570                                         regulator-name = "ldo5";
 571                                         regulator-min-microvolt = <1800000>;
 572                                         regulator-max-microvolt = <1800000>;
 573                                         regulator-always-on;
 574                                         regulator-boot-on;
 575                                 };
 576
 577                                 ldo6_reg: ldo6 {
 578                                         /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 579                                         regulator-name = "ldo6";
 580                                         regulator-min-microvolt = <1200000>;
 581                                         regulator-max-microvolt = <1200000>;
 582                                         regulator-always-on;
 583                                         regulator-boot-on;
 584                                 };
 585
 586                                 ldo7_reg: ldo7 {
 587                                         /* VDD_VPP: vpp1 */
 588                                         regulator-name = "ldo7";
 589                                         regulator-min-microvolt = <2000000>;
 590                                         regulator-max-microvolt = <2000000>;
 591                                         /* Only for efuse reprograming! */
 592                                         status = "disabled";
 593                                 };
 594
 595                                 ldo8_reg: ldo8 {
 596                                         /* VDD_3v0: Does not go anywhere */
 597                                         regulator-name = "ldo8";
 598                                         regulator-min-microvolt = <3000000>;
 599                                         regulator-max-microvolt = <3000000>;
 600                                         regulator-boot-on;
 601                                         /* Unused */
 602                                         status = "disabled";
 603                                 };
 604
 605                                 ldo9_reg: ldo9 {
 606                                         /* VCC_DV_SDIO: vdds_sdcard */
 607                                         regulator-name = "ldo9";
 608                                         regulator-min-microvolt = <1800000>;
 609                                         regulator-max-microvolt = <3000000>;
 610                                         regulator-boot-on;
 611                                 };
 612
 613                                 ldoln_reg: ldoln {
 614                                         /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 615                                         regulator-name = "ldoln";
 616                                         regulator-min-microvolt = <1800000>;
 617                                         regulator-max-microvolt = <1800000>;
 618                                         regulator-always-on;
 619                                         regulator-boot-on;
 620                                 };
 621
 622                                 ldousb_reg: ldousb {
 623                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 624                                         regulator-name = "ldousb";
 625                                         regulator-min-microvolt = <3250000>;
 626                                         regulator-max-microvolt = <3250000>;
 627                                         regulator-always-on;
 628                                         regulator-boot-on;
 629                                 };
 630
 631                                 regen3_reg: regen3 {
 632                                         /* REGEN3 controls LDO9 supply to card */
 633                                         regulator-name = "regen3";
 634                                         regulator-always-on;
 635                                         regulator-boot-on;
 636                                 };
 637                         };
 638                 };
 639
 640                 palmas_power_button: palmas_power_button {
 641                         compatible = "ti,palmas-pwrbutton";
 642                         interrupt-parent = <&palmas>;
 643                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 644                         wakeup-source;
 645                 };
 646         };
 647
 648         twl6040: twl@4b {
 649                 compatible = "ti,twl6040";
 650                 #clock-cells = <0>;
 651                 reg = <0x4b>;
 652
 653                 pinctrl-names = "default";
 654                 pinctrl-0 = <&twl6040_pins>;
 655
 656                 /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
 657                 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
 658
 659                 /* audpwron gpio defined in the board specific dts */
 660
 661                 vio-supply = <&smps7_reg>;
 662                 v2v1-supply = <&smps9_reg>;
 663                 enable-active-high;
 664
 665                 clocks = <&clk32kgaudio>, <&fref_xtal_ck>;
 666                 clock-names = "clk32k", "mclk";
 667         };
 668 };
 669
 670 &mcpdm {
 671         pinctrl-names = "default";
 672         pinctrl-0 = <&mcpdm_pins>;
 673
 674         clocks = <&twl6040>;
 675         clock-names = "pdmclk";
 676
 677         status = "okay";
 678 };
 679
 680 &mcbsp1 {
 681         pinctrl-names = "default";
 682         pinctrl-0 = <&mcbsp1_pins>;
 683         status = "okay";
 684 };
 685
 686 &mcbsp2 {
 687         pinctrl-names = "default";
 688         pinctrl-0 = <&mcbsp2_pins>;
 689         status = "okay";
 690 };
 691
 692 &usbhshost {
 693         port2-mode = "ehci-hsic";
 694         port3-mode = "ehci-hsic";
 695 };
 696
 697 &usbhsehci {
 698         phys = <0 &hsusb2_phy &hsusb3_phy>;
 699 };
 700
 701 &usb3 {
 702         extcon = <&extcon_usb3>;
 703         vbus-supply = <&smps10_out1_reg>;
 704 };
 705
 706 &dwc3 {
 707         extcon = <&extcon_usb3>;
 708         dr_mode = "otg";
 709 };
 710
 711 &mcspi1 {
 712
 713 };
 714
 715 &mcspi2 {
 716         pinctrl-names = "default";
 717         pinctrl-0 = <&mcspi2_pins>;
 718 };
 719
 720 &mcspi3 {
 721         pinctrl-names = "default";
 722         pinctrl-0 = <&mcspi3_pins>;
 723 };
 724
 725 &uart1 {
 726         pinctrl-names = "default";
 727         pinctrl-0 = <&uart1_pins>;
 728 };
 729
 730 &uart3 {
 731         pinctrl-names = "default";
 732         pinctrl-0 = <&uart3_pins>;
 733         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 734                               <&omap5_pmx_core 0x19c>;
 735 };
 736
 737 &uart5 {
 738         pinctrl-names = "default";
 739         pinctrl-0 = <&uart5_pins>;
 740 };
 741
 742 &cpu0 {
 743         cpu0-supply = <&smps123_reg>;
 744 };
 745
 746 &dss {
 747         status = "ok";
 748 };
 749
 750 &hdmi {
 751         status = "ok";
 752
 753         /* vdda-supply populated in board specific dts file */
 754
 755         pinctrl-names = "default";
 756         pinctrl-0 = <&dss_hdmi_pins>;
 757
 758         port {
 759                 hdmi_out: endpoint {
 760                         remote-endpoint = <&tpd12s015_in>;
 761                 };
 762         };
 763 };