arch/arm/boot/dts/omap5-uevm.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5 /dts-v1/;
   6
   7 #include "omap5-board-common.dtsi"
   8
   9 / {
  10         model = "TI OMAP5 uEVM board";
  11         compatible = "ti,omap5-uevm", "ti,omap5";
  12
  13         memory@80000000 {
  14                 device_type = "memory";
  15                 reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
  16         };
  17
  18         aliases {
  19                 ethernet = &ethernet;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24                 led1 {
  25                         label = "omap5:blue:usr1";
  26                         gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
  27                         linux,default-trigger = "heartbeat";
  28                         default-state = "off";
  29                 };
  30         };
  31
  32         evm_keys {
  33                 compatible = "gpio-keys";
  34
  35                 pinctrl-names = "default";
  36                 pinctrl-0 = <&evm_keys_pins>;
  37
  38                 #address-cells = <7>;
  39                 #size-cells = <0>;
  40
  41                 btn1 {
  42                         label = "BTN1";
  43                         linux,code = <169>;
  44                         gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;    /* gpio3_83 */
  45                         wakeup-source;
  46                         autorepeat;
  47                         debounce-interval = <50>;
  48                 };
  49         };
  50
  51         evm_leds {
  52                 compatible = "gpio-leds";
  53
  54                 led1 {
  55                         label = "omap5:red:led";
  56                         gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
  57                         linux,default-trigger = "mmc0";
  58                         default-state = "off";
  59                 };
  60
  61                 led2 {
  62                         label = "omap5:green:led";
  63                         gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
  64                         linux,default-trigger = "mmc1";
  65                         default-state = "off";
  66                 };
  67
  68                 led3 {
  69                         label = "omap5:blue:led";
  70                         gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
  71                         linux,default-trigger = "mmc2";
  72                         default-state = "off";
  73                 };
  74
  75                 led4 {
  76                         label = "omap5:green:led1";
  77                         gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
  78                         linux,default-trigger = "heartbeat";
  79                         default-state = "off";
  80                 };
  81
  82                 led5 {
  83                         label = "omap5:green:led2";
  84                         gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
  85                         linux,default-trigger = "default-on";
  86                         default-state = "off";
  87                 };
  88
  89                 led6 {
  90                         label = "omap5:green:led3";
  91                         gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
  92                         linux,default-trigger = "heartbeat";
  93                         default-state = "off";
  94                 };
  95
  96                 led7 {
  97                         label = "omap5:green:led4";
  98                         gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
  99                         linux,default-trigger = "default-on";
 100                         default-state = "off";
 101                 };
 102
 103                 led8 {
 104                         label = "omap5:green:led5";
 105                         gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
 106                         linux,default-trigger = "heartbeat";
 107                         default-state = "off";
 108                 };
 109         };
 110 };
 111
 112 &hdmi {
 113         vdda-supply = <&ldo4_reg>;
 114 };
 115
 116 &i2c1 {
 117         eeprom@50 {
 118                 compatible = "atmel,24c02";
 119                 reg = <0x50>;
 120         };
 121 };
 122
 123 &i2c5 {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&i2c5_pins>;
 126
 127         clock-frequency = <400000>;
 128
 129         gpio9: gpio@22 {
 130                 compatible = "ti,tca6424";
 131                 reg = <0x22>;
 132                 gpio-controller;
 133                 #gpio-cells = <2>;
 134         };
 135 };
 136
 137 &mmc1 {
 138         pinctrl-names = "default";
 139         pinctrl-0 = <&mmc1_pins>;
 140
 141         cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */
 142 };
 143
 144 &omap5_pmx_core {
 145         evm_keys_pins: pinmux_evm_keys_gpio_pins {
 146                 pinctrl-single,pins = <
 147                         OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)       /* gpio3_83 */
 148                 >;
 149         };
 150
 151         i2c5_pins: pinmux_i2c5_pins {
 152                 pinctrl-single,pins = <
 153                         OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)               /* i2c5_scl */
 154                         OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)               /* i2c5_sda */
 155                 >;
 156         };
 157
 158         mmc1_pins: pinmux_mmc1_pins {
 159                 pinctrl-single,pins = <
 160                         OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)        /* gpio5_152 */
 161                 >;
 162         };
 163 };
 164
 165 &tpd12s015 {
 166         gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,    /* TCA6424A P01, CT CP HPD */
 167                 <&gpio9 1 GPIO_ACTIVE_HIGH>,    /* TCA6424A P00, LS OE */
 168                 <&gpio7 1 GPIO_ACTIVE_HIGH>;    /* GPIO 193, HPD */
 169 };
 170
 171 &twl6040 {
 172         ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
 173 };
 174
 175 &twl6040_pins {
 176         pinctrl-single,pins = <
 177                 OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)      /* mcspi1_somi.gpio5_141 */
 178         >;
 179 };
 180
 181 &usbhsehci {
 182         #address-cells = <1>;
 183         #size-cells = <0>;
 184
 185         hub@2 {
 186                 compatible = "usb424,3503";
 187                 reg = <2>;
 188                 #address-cells = <1>;
 189                 #size-cells = <0>;
 190         };
 191
 192         ethernet: usbether@3 {
 193                 compatible = "usb424,9730";
 194                 reg = <3>;
 195         };
 196 };
 197
 198 &wlcore {
 199         compatible = "ti,wl1837";
 200 };