]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blob - arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
Merge tag 'topic/designware-baytrail-2017-03-02' of git://anongit.freedesktop.org...
[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / qcom-apq8064-sony-xperia-yuga.dts
1 #include "qcom-apq8064-v2.0.dtsi"
2 #include <dt-bindings/gpio/gpio.h>
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mfd/qcom-rpm.h>
5 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
6
7 / {
8 model = "Sony Xperia Z";
9 compatible = "sony,xperia-yuga", "qcom,apq8064";
10
11 aliases {
12 serial0 = &gsbi5_serial;
13 };
14
15 chosen {
16 stdout-path = "serial0:115200n8";
17 };
18
19 gpio-keys {
20 compatible = "gpio-keys";
21 input-name = "gpio-keys";
22
23 pinctrl-names = "default";
24 pinctrl-0 = <&gpio_keys_pin_a>;
25
26 camera-focus {
27 label = "camera_focus";
28 gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
29 linux,input-type = <1>;
30 linux,code = <KEY_CAMERA_FOCUS>;
31 };
32
33 camera-snapshot {
34 label = "camera_snapshot";
35 gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
36 linux,input-type = <1>;
37 linux,code = <KEY_CAMERA>;
38 };
39
40 volume-down {
41 label = "volume_down";
42 gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
43 linux,input-type = <1>;
44 linux,code = <KEY_VOLUMEDOWN>;
45 };
46
47 volume-up {
48 label = "volume_up";
49 gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
50 linux,input-type = <1>;
51 linux,code = <KEY_VOLUMEUP>;
52 };
53 };
54
55 soc {
56 pinctrl@800000 {
57 gsbi5_uart_pin_a: gsbi5-uart-pin-active {
58 rx {
59 pins = "gpio52";
60 function = "gsbi5";
61 drive-strength = <2>;
62 bias-pull-up;
63 };
64
65 tx {
66 pins = "gpio51";
67 function = "gsbi5";
68 drive-strength = <4>;
69 bias-disable;
70 };
71 };
72
73
74 sdcc3_cd_pin_a: sdcc3-cd-pin-active {
75 pins = "gpio26";
76 function = "gpio";
77
78 drive-strength = <2>;
79 bias-disable;
80 };
81 };
82
83
84 rpm@108000 {
85 regulators {
86 vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
87 vin_lvs_1_3_6-supply = <&pm8921_s4>;
88 vin_lvs_4_5_7-supply = <&pm8921_s4>;
89 vin_ncp-supply = <&pm8921_l6>;
90 vin_lvs2-supply = <&pm8921_s4>;
91 vin_l24-supply = <&pm8921_s1>;
92 vin_l25-supply = <&pm8921_s1>;
93 vin_l27-supply = <&pm8921_s7>;
94 vin_l28-supply = <&pm8921_s7>;
95
96 /* Buck SMPS */
97 s1 {
98 regulator-always-on;
99 regulator-min-microvolt = <1225000>;
100 regulator-max-microvolt = <1225000>;
101 qcom,switch-mode-frequency = <3200000>;
102 bias-pull-down;
103 };
104
105 s2 {
106 regulator-min-microvolt = <1300000>;
107 regulator-max-microvolt = <1300000>;
108 qcom,switch-mode-frequency = <1600000>;
109 bias-pull-down;
110 };
111
112 s3 {
113 regulator-min-microvolt = <500000>;
114 regulator-max-microvolt = <1150000>;
115 qcom,switch-mode-frequency = <4800000>;
116 bias-pull-down;
117 };
118
119 s4 {
120 regulator-always-on;
121 regulator-min-microvolt = <1800000>;
122 regulator-max-microvolt = <1800000>;
123 qcom,switch-mode-frequency = <1600000>;
124 bias-pull-down;
125 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
126 };
127
128 s7 {
129 regulator-min-microvolt = <1300000>;
130 regulator-max-microvolt = <1300000>;
131 qcom,switch-mode-frequency = <3200000>;
132 };
133
134 s8 {
135 regulator-min-microvolt = <2200000>;
136 regulator-max-microvolt = <2200000>;
137 qcom,switch-mode-frequency = <1600000>;
138 };
139
140 /* PMOS LDO */
141 l1 {
142 regulator-always-on;
143 regulator-min-microvolt = <1100000>;
144 regulator-max-microvolt = <1100000>;
145 bias-pull-down;
146 };
147
148 l2 {
149 regulator-min-microvolt = <1200000>;
150 regulator-max-microvolt = <1200000>;
151 bias-pull-down;
152 };
153
154 l3 {
155 regulator-min-microvolt = <3075000>;
156 regulator-max-microvolt = <3075000>;
157 bias-pull-down;
158 };
159
160 l4 {
161 regulator-always-on;
162 regulator-min-microvolt = <1800000>;
163 regulator-max-microvolt = <1800000>;
164 bias-pull-down;
165 };
166
167 l5 {
168 regulator-min-microvolt = <2950000>;
169 regulator-max-microvolt = <2950000>;
170 bias-pull-down;
171 };
172
173 l6 {
174 regulator-min-microvolt = <2950000>;
175 regulator-max-microvolt = <2950000>;
176 bias-pull-down;
177 };
178
179 l7 {
180 regulator-min-microvolt = <1850000>;
181 regulator-max-microvolt = <2950000>;
182 bias-pull-down;
183 };
184
185 l8 {
186 regulator-min-microvolt = <2800000>;
187 regulator-max-microvolt = <2800000>;
188 bias-pull-down;
189 };
190
191 l9 {
192 regulator-min-microvolt = <3000000>;
193 regulator-max-microvolt = <3000000>;
194 bias-pull-down;
195 };
196
197 l10 {
198 regulator-min-microvolt = <2900000>;
199 regulator-max-microvolt = <2900000>;
200 bias-pull-down;
201 };
202
203 l11 {
204 regulator-min-microvolt = <3000000>;
205 regulator-max-microvolt = <3000000>;
206 bias-pull-down;
207 };
208
209 l12 {
210 regulator-min-microvolt = <1200000>;
211 regulator-max-microvolt = <1200000>;
212 bias-pull-down;
213 };
214
215 l14 {
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
218 bias-pull-down;
219 };
220
221 l15 {
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <2950000>;
224 bias-pull-down;
225 };
226
227 l16 {
228 regulator-min-microvolt = <2800000>;
229 regulator-max-microvolt = <2800000>;
230 bias-pull-down;
231 };
232
233 l17 {
234 regulator-min-microvolt = <2000000>;
235 regulator-max-microvolt = <2000000>;
236 bias-pull-down;
237 };
238
239 l18 {
240 regulator-min-microvolt = <1200000>;
241 regulator-max-microvolt = <1200000>;
242 bias-pull-down;
243 };
244
245 l21 {
246 regulator-min-microvolt = <1050000>;
247 regulator-max-microvolt = <1050000>;
248 bias-pull-down;
249 };
250
251 l22 {
252 regulator-min-microvolt = <2600000>;
253 regulator-max-microvolt = <2600000>;
254 bias-pull-down;
255 };
256
257 l23 {
258 regulator-min-microvolt = <1800000>;
259 regulator-max-microvolt = <1800000>;
260 bias-pull-down;
261 };
262
263 l24 {
264 regulator-min-microvolt = <750000>;
265 regulator-max-microvolt = <1150000>;
266 bias-pull-down;
267 };
268
269 l25 {
270 regulator-always-on;
271 regulator-min-microvolt = <1250000>;
272 regulator-max-microvolt = <1250000>;
273 bias-pull-down;
274 };
275
276 l27 {
277 regulator-min-microvolt = <1100000>;
278 regulator-max-microvolt = <1100000>;
279 };
280
281 l28 {
282 regulator-min-microvolt = <1050000>;
283 regulator-max-microvolt = <1050000>;
284 bias-pull-down;
285 };
286
287 l29 {
288 regulator-min-microvolt = <2000000>;
289 regulator-max-microvolt = <2000000>;
290 bias-pull-down;
291 };
292
293 /* Low Voltage Switch */
294 lvs1 {
295 bias-pull-down;
296 };
297
298 lvs2 {
299 bias-pull-down;
300 };
301
302 lvs3 {
303 bias-pull-down;
304 };
305
306 lvs4 {
307 bias-pull-down;
308 };
309
310 lvs5 {
311 bias-pull-down;
312 };
313
314 lvs6 {
315 bias-pull-down;
316 };
317
318 lvs7 {
319 bias-pull-down;
320 };
321
322 usb-switch {};
323
324 hdmi-switch {};
325
326 ncp {
327 regulator-min-microvolt = <1800000>;
328 regulator-max-microvolt = <1800000>;
329 qcom,switch-mode-frequency = <1600000>;
330 };
331 };
332 };
333
334 qcom,ssbi@500000 {
335 pmic@0 {
336 gpio@150 {
337 gpio_keys_pin_a: gpio-keys-pin-active {
338 pins = "gpio3", "gpio4", "gpio29", "gpio35";
339 function = "normal";
340
341 bias-pull-up;
342 drive-push-pull;
343 input-enable;
344 power-source = <2>;
345 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
346 qcom,pull-up-strength = <0>;
347 };
348 };
349 };
350 };
351
352 phy@12500000 {
353 status = "okay";
354 vddcx-supply = <&pm8921_s3>;
355 v3p3-supply = <&pm8921_l3>;
356 v1p8-supply = <&pm8921_l4>;
357 };
358
359 gadget@12500000 {
360 status = "okay";
361 };
362
363 gsbi@1a200000 {
364 status = "ok";
365 qcom,mode = <GSBI_PROT_I2C_UART>;
366
367 serial@1a240000 {
368 status = "ok";
369
370 pinctrl-names = "default";
371 pinctrl-0 = <&gsbi5_uart_pin_a>;
372 };
373 };
374
375 amba {
376 sdcc1: sdcc@12400000 {
377 status = "okay";
378
379 vmmc-supply = <&pm8921_l5>;
380 vqmmc-supply = <&pm8921_s4>;
381 };
382
383 sdcc3: sdcc@12180000 {
384 status = "okay";
385
386 vmmc-supply = <&pm8921_l6>;
387 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
388
389 pinctrl-names = "default";
390 pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
391 };
392 };
393
394 riva-pil@3204000 {
395 status = "okay";
396
397 pinctrl-names = "default";
398 pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
399 };
400 };
401 };