arch/arm/boot/dts/qcom-msm8960.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/interrupt-controller/arm-gic.h>
   5 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
   6 #include <dt-bindings/mfd/qcom-rpm.h>
   7 #include <dt-bindings/soc/qcom,gsbi.h>
   8
   9 / {
  10         #address-cells = <1>;
  11         #size-cells = <1>;
  12         model = "Qualcomm MSM8960";
  13         compatible = "qcom,msm8960";
  14         interrupt-parent = <&intc>;
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 interrupts = <1 14 0x304>;
  20
  21                 cpu@0 {
  22                         compatible = "qcom,krait";
  23                         enable-method = "qcom,kpss-acc-v1";
  24                         device_type = "cpu";
  25                         reg = <0>;
  26                         next-level-cache = <&L2>;
  27                         qcom,acc = <&acc0>;
  28                         qcom,saw = <&saw0>;
  29                 };
  30
  31                 cpu@1 {
  32                         compatible = "qcom,krait";
  33                         enable-method = "qcom,kpss-acc-v1";
  34                         device_type = "cpu";
  35                         reg = <1>;
  36                         next-level-cache = <&L2>;
  37                         qcom,acc = <&acc1>;
  38                         qcom,saw = <&saw1>;
  39                 };
  40
  41                 L2: l2-cache {
  42                         compatible = "cache";
  43                         cache-level = <2>;
  44                 };
  45         };
  46
  47         memory {
  48                 device_type = "memory";
  49                 reg = <0x0 0x0>;
  50         };
  51
  52         cpu-pmu {
  53                 compatible = "qcom,krait-pmu";
  54                 interrupts = <1 10 0x304>;
  55                 qcom,no-pc-write;
  56         };
  57
  58         clocks {
  59                 cxo_board {
  60                         compatible = "fixed-clock";
  61                         #clock-cells = <0>;
  62                         clock-frequency = <19200000>;
  63                         clock-output-names = "cxo_board";
  64                 };
  65
  66                 pxo_board {
  67                         compatible = "fixed-clock";
  68                         #clock-cells = <0>;
  69                         clock-frequency = <27000000>;
  70                         clock-output-names = "pxo_board";
  71                 };
  72
  73                 sleep_clk {
  74                         compatible = "fixed-clock";
  75                         #clock-cells = <0>;
  76                         clock-frequency = <32768>;
  77                         clock-output-names = "sleep_clk";
  78                 };
  79         };
  80
  81         soc: soc {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 ranges;
  85                 compatible = "simple-bus";
  86
  87                 intc: interrupt-controller@2000000 {
  88                         compatible = "qcom,msm-qgic2";
  89                         interrupt-controller;
  90                         #interrupt-cells = <3>;
  91                         reg = <0x02000000 0x1000>,
  92                               <0x02002000 0x1000>;
  93                 };
  94
  95                 timer@200a000 {
  96                         compatible = "qcom,kpss-timer",
  97                                      "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
  98                         interrupts = <1 1 0x301>,
  99                                      <1 2 0x301>,
 100                                      <1 3 0x301>;
 101                         reg = <0x0200a000 0x100>;
 102                         clock-frequency = <27000000>,
 103                                           <32768>;
 104                         cpu-offset = <0x80000>;
 105                 };
 106
 107                 msmgpio: pinctrl@800000 {
 108                         compatible = "qcom,msm8960-pinctrl";
 109                         gpio-controller;
 110                         #gpio-cells = <2>;
 111                         interrupts = <0 16 0x4>;
 112                         interrupt-controller;
 113                         #interrupt-cells = <2>;
 114                         reg = <0x800000 0x4000>;
 115                 };
 116
 117                 gcc: clock-controller@900000 {
 118                         compatible = "qcom,gcc-msm8960";
 119                         #clock-cells = <1>;
 120                         #reset-cells = <1>;
 121                         reg = <0x900000 0x4000>;
 122                 };
 123
 124                 lcc: clock-controller@28000000 {
 125                         compatible = "qcom,lcc-msm8960";
 126                         reg = <0x28000000 0x1000>;
 127                         #clock-cells = <1>;
 128                         #reset-cells = <1>;
 129                 };
 130
 131                 clock-controller@4000000 {
 132                         compatible = "qcom,mmcc-msm8960";
 133                         reg = <0x4000000 0x1000>;
 134                         #clock-cells = <1>;
 135                         #reset-cells = <1>;
 136                 };
 137
 138                 l2cc: clock-controller@2011000 {
 139                         compatible      = "syscon";
 140                         reg             = <0x2011000 0x1000>;
 141                 };
 142
 143                 rpm@108000 {
 144                         compatible      = "qcom,rpm-msm8960";
 145                         reg             = <0x108000 0x1000>;
 146                         qcom,ipc        = <&l2cc 0x8 2>;
 147
 148                         interrupts      = <0 19 0>, <0 21 0>, <0 22 0>;
 149                         interrupt-names = "ack", "err", "wakeup";
 150
 151                         regulators {
 152                                 compatible = "qcom,rpm-pm8921-regulators";
 153                         };
 154                 };
 155
 156                 acc0: clock-controller@2088000 {
 157                         compatible = "qcom,kpss-acc-v1";
 158                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 159                 };
 160
 161                 acc1: clock-controller@2098000 {
 162                         compatible = "qcom,kpss-acc-v1";
 163                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 164                 };
 165
 166                 saw0: regulator@2089000 {
 167                         compatible = "qcom,saw2";
 168                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 169                         regulator;
 170                 };
 171
 172                 saw1: regulator@2099000 {
 173                         compatible = "qcom,saw2";
 174                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 175                         regulator;
 176                 };
 177
 178                 gsbi5: gsbi@16400000 {
 179                         compatible = "qcom,gsbi-v1.0.0";
 180                         cell-index = <5>;
 181                         reg = <0x16400000 0x100>;
 182                         clocks = <&gcc GSBI5_H_CLK>;
 183                         clock-names = "iface";
 184                         #address-cells = <1>;
 185                         #size-cells = <1>;
 186                         ranges;
 187
 188                         syscon-tcsr = <&tcsr>;
 189
 190                         gsbi5_serial: serial@16440000 {
 191                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 192                                 reg = <0x16440000 0x1000>,
 193                                       <0x16400000 0x1000>;
 194                                 interrupts = <0 154 0x0>;
 195                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 196                                 clock-names = "core", "iface";
 197                                 status = "disabled";
 198                         };
 199                 };
 200
 201                 qcom,ssbi@500000 {
 202                         compatible = "qcom,ssbi";
 203                         reg = <0x500000 0x1000>;
 204                         qcom,controller-type = "pmic-arbiter";
 205
 206                         pmicintc: pmic@0 {
 207                                 compatible = "qcom,pm8921";
 208                                 interrupt-parent = <&msmgpio>;
 209                                 interrupts = <104 8>;
 210                                 #interrupt-cells = <2>;
 211                                 interrupt-controller;
 212                                 #address-cells = <1>;
 213                                 #size-cells = <0>;
 214
 215                                 pwrkey@1c {
 216                                         compatible = "qcom,pm8921-pwrkey";
 217                                         reg = <0x1c>;
 218                                         interrupt-parent = <&pmicintc>;
 219                                         interrupts = <50 1>, <51 1>;
 220                                         debounce = <15625>;
 221                                         pull-up;
 222                                 };
 223
 224                                 keypad@148 {
 225                                         compatible = "qcom,pm8921-keypad";
 226                                         reg = <0x148>;
 227                                         interrupt-parent = <&pmicintc>;
 228                                         interrupts = <74 1>, <75 1>;
 229                                         debounce = <15>;
 230                                         scan-delay = <32>;
 231                                         row-hold = <91500>;
 232                                 };
 233
 234                                 rtc@11d {
 235                                         compatible = "qcom,pm8921-rtc";
 236                                         interrupt-parent = <&pmicintc>;
 237                                         interrupts = <39 1>;
 238                                         reg = <0x11d>;
 239                                         allow-set-time;
 240                                 };
 241                         };
 242                 };
 243
 244                 rng@1a500000 {
 245                         compatible = "qcom,prng";
 246                         reg = <0x1a500000 0x200>;
 247                         clocks = <&gcc PRNG_CLK>;
 248                         clock-names = "core";
 249                 };
 250
 251                 /* Temporary fixed regulator */
 252                 vsdcc_fixed: vsdcc-regulator {
 253                         compatible = "regulator-fixed";
 254                         regulator-name = "SDCC Power";
 255                         regulator-min-microvolt = <2700000>;
 256                         regulator-max-microvolt = <2700000>;
 257                         regulator-always-on;
 258                 };
 259
 260                 amba {
 261                         compatible = "simple-bus";
 262                         #address-cells = <1>;
 263                         #size-cells = <1>;
 264                         ranges;
 265                         sdcc1: sdcc@12400000 {
 266                                 status          = "disabled";
 267                                 compatible      = "arm,pl18x", "arm,primecell";
 268                                 arm,primecell-periphid = <0x00051180>;
 269                                 reg             = <0x12400000 0x8000>;
 270                                 interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 271                                 interrupt-names = "cmd_irq";
 272                                 clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 273                                 clock-names     = "mclk", "apb_pclk";
 274                                 bus-width       = <8>;
 275                                 max-frequency   = <96000000>;
 276                                 non-removable;
 277                                 cap-sd-highspeed;
 278                                 cap-mmc-highspeed;
 279                                 vmmc-supply = <&vsdcc_fixed>;
 280                         };
 281
 282                         sdcc3: sdcc@12180000 {
 283                                 compatible      = "arm,pl18x", "arm,primecell";
 284                                 arm,primecell-periphid = <0x00051180>;
 285                                 status          = "disabled";
 286                                 reg             = <0x12180000 0x8000>;
 287                                 interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 288                                 interrupt-names = "cmd_irq";
 289                                 clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 290                                 clock-names     = "mclk", "apb_pclk";
 291                                 bus-width       = <4>;
 292                                 cap-sd-highspeed;
 293                                 cap-mmc-highspeed;
 294                                 max-frequency   = <192000000>;
 295                                 no-1-8-v;
 296                                 vmmc-supply = <&vsdcc_fixed>;
 297                         };
 298                 };
 299
 300                 tcsr: syscon@1a400000 {
 301                         compatible = "qcom,tcsr-msm8960", "syscon";
 302                         reg = <0x1a400000 0x100>;
 303                 };
 304
 305                 gsbi@16000000 {
 306                         compatible = "qcom,gsbi-v1.0.0";
 307                         cell-index = <1>;
 308                         reg = <0x16000000 0x100>;
 309                         clocks = <&gcc GSBI1_H_CLK>;
 310                         clock-names = "iface";
 311                         #address-cells = <1>;
 312                         #size-cells = <1>;
 313                         ranges;
 314
 315                         spi@16080000 {
 316                                 compatible = "qcom,spi-qup-v1.1.1";
 317                                 #address-cells = <1>;
 318                                 #size-cells = <0>;
 319                                 reg = <0x16080000 0x1000>;
 320                                 interrupts = <0 147 0>;
 321                                 spi-max-frequency = <24000000>;
 322                                 cs-gpios = <&msmgpio 8 0>;
 323
 324                                 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
 325                                 clock-names = "core", "iface";
 326                                 status = "disabled";
 327                         };
 328                 };
 329         };
 330 };