arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts

   1 #include "qcom-msm8974pro.dtsi"
   2 #include "qcom-pm8841.dtsi"
   3 #include "qcom-pm8941.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   7
   8 / {
   9         model = "Sony Xperia Z2 Tablet";
  10         compatible = "sony,xperia-castor", "qcom,msm8974";
  11
  12         aliases {
  13                 serial0 = &blsp1_uart2;
  14         };
  15
  16         chosen {
  17                 stdout-path = "serial0:115200n8";
  18         };
  19
  20         gpio-keys {
  21                 compatible = "gpio-keys";
  22                 input-name = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&gpio_keys_pin_a>;
  26
  27                 volume-down {
  28                         label = "volume_down";
  29                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  30                         linux,input-type = <1>;
  31                         linux,code = <KEY_VOLUMEDOWN>;
  32                 };
  33
  34                 camera-snapshot {
  35                         label = "camera_snapshot";
  36                         gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
  37                         linux,input-type = <1>;
  38                         linux,code = <KEY_CAMERA>;
  39                 };
  40
  41                 camera-focus {
  42                         label = "camera_focus";
  43                         gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
  44                         linux,input-type = <1>;
  45                         linux,code = <KEY_CAMERA_FOCUS>;
  46                 };
  47
  48                 volume-up {
  49                         label = "volume_up";
  50                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  51                         linux,input-type = <1>;
  52                         linux,code = <KEY_VOLUMEUP>;
  53                 };
  54         };
  55
  56         smd {
  57                 rpm {
  58                         rpm_requests {
  59                                 pm8941-regulators {
  60                                         vdd_l1_l3-supply = <&pm8941_s1>;
  61                                         vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
  62                                         vdd_l4_l11-supply = <&pm8941_s1>;
  63                                         vdd_l5_l7-supply = <&pm8941_s2>;
  64                                         vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
  65                                         vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
  66                                         vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
  67                                         vdd_l21-supply = <&vreg_boost>;
  68
  69                                         s1 {
  70                                                 regulator-min-microvolt = <1300000>;
  71                                                 regulator-max-microvolt = <1300000>;
  72                                                 regulator-always-on;
  73                                                 regulator-boot-on;
  74                                         };
  75
  76                                         s2 {
  77                                                 regulator-min-microvolt = <2150000>;
  78                                                 regulator-max-microvolt = <2150000>;
  79                                                 regulator-boot-on;
  80                                         };
  81
  82                                         s3 {
  83                                                 regulator-min-microvolt = <1800000>;
  84                                                 regulator-max-microvolt = <1800000>;
  85                                                 regulator-always-on;
  86                                                 regulator-boot-on;
  87
  88                                                 regulator-system-load = <154000>;
  89                                         };
  90
  91                                         s4 {
  92                                                 regulator-min-microvolt = <5000000>;
  93                                                 regulator-max-microvolt = <5000000>;
  94                                         };
  95
  96                                         l1 {
  97                                                 regulator-min-microvolt = <1225000>;
  98                                                 regulator-max-microvolt = <1225000>;
  99
 100                                                 regulator-always-on;
 101                                                 regulator-boot-on;
 102                                         };
 103
 104                                         l2 {
 105                                                 regulator-min-microvolt = <1200000>;
 106                                                 regulator-max-microvolt = <1200000>;
 107                                         };
 108
 109                                         l3 {
 110                                                 regulator-min-microvolt = <1200000>;
 111                                                 regulator-max-microvolt = <1200000>;
 112                                         };
 113
 114                                         l4 {
 115                                                 regulator-min-microvolt = <1225000>;
 116                                                 regulator-max-microvolt = <1225000>;
 117                                         };
 118
 119                                         l5 {
 120                                                 regulator-min-microvolt = <1800000>;
 121                                                 regulator-max-microvolt = <1800000>;
 122                                         };
 123
 124                                         l6 {
 125                                                 regulator-min-microvolt = <1800000>;
 126                                                 regulator-max-microvolt = <1800000>;
 127
 128                                                 regulator-boot-on;
 129                                         };
 130
 131                                         l7 {
 132                                                 regulator-min-microvolt = <1800000>;
 133                                                 regulator-max-microvolt = <1800000>;
 134
 135                                                 regulator-boot-on;
 136                                         };
 137
 138                                         l8 {
 139                                                 regulator-min-microvolt = <1800000>;
 140                                                 regulator-max-microvolt = <1800000>;
 141                                         };
 142
 143                                         l9 {
 144                                                 regulator-min-microvolt = <1800000>;
 145                                                 regulator-max-microvolt = <2950000>;
 146                                         };
 147
 148                                         l11 {
 149                                                 regulator-min-microvolt = <1300000>;
 150                                                 regulator-max-microvolt = <1350000>;
 151                                         };
 152
 153                                         l12 {
 154                                                 regulator-min-microvolt = <1800000>;
 155                                                 regulator-max-microvolt = <1800000>;
 156
 157                                                 regulator-always-on;
 158                                                 regulator-boot-on;
 159                                         };
 160
 161                                         l13 {
 162                                                 regulator-min-microvolt = <1800000>;
 163                                                 regulator-max-microvolt = <2950000>;
 164
 165                                                 regulator-boot-on;
 166                                         };
 167
 168                                         l14 {
 169                                                 regulator-min-microvolt = <1800000>;
 170                                                 regulator-max-microvolt = <1800000>;
 171                                         };
 172
 173                                         l15 {
 174                                                 regulator-min-microvolt = <2050000>;
 175                                                 regulator-max-microvolt = <2050000>;
 176                                         };
 177
 178                                         l16 {
 179                                                 regulator-min-microvolt = <2700000>;
 180                                                 regulator-max-microvolt = <2700000>;
 181                                         };
 182
 183                                         l17 {
 184                                                 regulator-min-microvolt = <2700000>;
 185                                                 regulator-max-microvolt = <2700000>;
 186                                         };
 187
 188                                         l18 {
 189                                                 regulator-min-microvolt = <2850000>;
 190                                                 regulator-max-microvolt = <2850000>;
 191                                         };
 192
 193                                         l19 {
 194                                                 regulator-min-microvolt = <2850000>;
 195                                                 regulator-max-microvolt = <2850000>;
 196                                         };
 197
 198                                         l20 {
 199                                                 regulator-min-microvolt = <2950000>;
 200                                                 regulator-max-microvolt = <2950000>;
 201
 202                                                 regulator-allow-set-load;
 203                                                 regulator-boot-on;
 204                                                 regulator-allow-set-load;
 205                                                 regulator-system-load = <500000>;
 206                                         };
 207
 208                                         l21 {
 209                                                 regulator-min-microvolt = <2950000>;
 210                                                 regulator-max-microvolt = <2950000>;
 211
 212                                                 regulator-boot-on;
 213                                         };
 214
 215                                         l22 {
 216                                                 regulator-min-microvolt = <3000000>;
 217                                                 regulator-max-microvolt = <3000000>;
 218                                         };
 219
 220                                         l23 {
 221                                                 regulator-min-microvolt = <2800000>;
 222                                                 regulator-max-microvolt = <2800000>;
 223                                         };
 224
 225                                         l24 {
 226                                                 regulator-min-microvolt = <3075000>;
 227                                                 regulator-max-microvolt = <3075000>;
 228
 229                                                 regulator-boot-on;
 230                                         };
 231                                 };
 232                         };
 233                 };
 234         };
 235
 236         vreg_bl_vddio: lcd-backlight-vddio {
 237                 compatible = "regulator-fixed";
 238                 regulator-name = "vreg_bl_vddio";
 239                 regulator-min-microvolt = <3150000>;
 240                 regulator-max-microvolt = <3150000>;
 241
 242                 gpio = <&msmgpio 69 0>;
 243                 enable-active-high;
 244
 245                 vin-supply = <&pm8941_s3>;
 246                 startup-delay-us = <70000>;
 247
 248                 pinctrl-names = "default";
 249                 pinctrl-0 = <&lcd_backlight_en_pin_a>;
 250         };
 251
 252         vreg_vsp: lcd-dcdc-regulator {
 253                 compatible = "regulator-fixed";
 254                 regulator-name = "vreg_vsp";
 255                 regulator-min-microvolt = <5600000>;
 256                 regulator-max-microvolt = <5600000>;
 257
 258                 gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
 259                 enable-active-high;
 260
 261                 pinctrl-names = "default";
 262                 pinctrl-0 = <&lcd_dcdc_en_pin_a>;
 263         };
 264
 265         vreg_wlan: wlan-regulator {
 266                 compatible = "regulator-fixed";
 267
 268                 regulator-name = "wl-reg";
 269                 regulator-min-microvolt = <3300000>;
 270                 regulator-max-microvolt = <3300000>;
 271
 272                 gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
 273                 enable-active-high;
 274
 275                 pinctrl-names = "default";
 276                 pinctrl-0 = <&wlan_regulator_pin>;
 277         };
 278 };
 279
 280 &soc {
 281         sdhci@f9824900 {
 282                 status = "ok";
 283
 284                 vmmc-supply = <&pm8941_l20>;
 285                 vqmmc-supply = <&pm8941_s3>;
 286
 287                 bus-width = <8>;
 288                 non-removable;
 289
 290                 pinctrl-names = "default";
 291                 pinctrl-0 = <&sdhc1_pin_a>;
 292         };
 293
 294         sdhci@f9864900 {
 295                 status = "ok";
 296
 297                 max-frequency = <100000000>;
 298                 non-removable;
 299                 vmmc-supply = <&vreg_wlan>;
 300
 301                 pinctrl-names = "default";
 302                 pinctrl-0 = <&sdhc3_pin_a>;
 303
 304                 #address-cells = <1>;
 305                 #size-cells = <0>;
 306
 307                 bcrmf@1 {
 308                         compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 309                         reg = <1>;
 310
 311                         brcm,drive-strength = <10>;
 312
 313                         pinctrl-names = "default";
 314                         pinctrl-0 = <&wlan_sleep_clk_pin>;
 315                 };
 316         };
 317
 318         sdhci@f98a4900 {
 319                 status = "ok";
 320
 321                 bus-width = <4>;
 322
 323                 vmmc-supply = <&pm8941_l21>;
 324                 vqmmc-supply = <&pm8941_l13>;
 325
 326                 cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
 327
 328                 pinctrl-names = "default";
 329                 pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
 330         };
 331
 332         serial@f991e000 {
 333                 status = "ok";
 334
 335                 pinctrl-names = "default";
 336                 pinctrl-0 = <&blsp1_uart2_pin_a>;
 337         };
 338
 339         usb@f9a55000 {
 340                 status = "ok";
 341
 342                 phys = <&usb_hs1_phy>;
 343                 phy-select = <&tcsr 0xb000 0>;
 344                 extcon = <&smbb>, <&usb_id>;
 345                 vbus-supply = <&chg_otg>;
 346
 347                 hnp-disable;
 348                 srp-disable;
 349                 adp-disable;
 350
 351                 ulpi {
 352                         phy@a {
 353                                 status = "ok";
 354
 355                                 v1p8-supply = <&pm8941_l6>;
 356                                 v3p3-supply = <&pm8941_l24>;
 357
 358                                 extcon = <&smbb>;
 359                                 qcom,init-seq = /bits/ 8 <0x1 0x64>;
 360                         };
 361                 };
 362         };
 363
 364         pinctrl@fd510000 {
 365                 blsp1_uart2_pin_a: blsp1-uart2-pin-active {
 366                         rx {
 367                                 pins = "gpio5";
 368                                 function = "blsp_uart2";
 369
 370                                 drive-strength = <2>;
 371                                 bias-pull-up;
 372                         };
 373
 374                         tx {
 375                                 pins = "gpio4";
 376                                 function = "blsp_uart2";
 377
 378                                 drive-strength = <4>;
 379                                 bias-disable;
 380                         };
 381                 };
 382
 383                 i2c8_pins: i2c8 {
 384                         mux {
 385                                 pins = "gpio47", "gpio48";
 386                                 function = "blsp_i2c8";
 387
 388                                 drive-strength = <2>;
 389                                 bias-disable;
 390                         };
 391                 };
 392
 393                 i2c11_pins: i2c11 {
 394                         mux {
 395                                 pins = "gpio83", "gpio84";
 396                                 function = "blsp_i2c11";
 397
 398                                 drive-strength = <2>;
 399                                 bias-disable;
 400                         };
 401                 };
 402
 403                 lcd_backlight_en_pin_a: lcd-backlight-vddio {
 404                         pins = "gpio69";
 405                         drive-strength = <10>;
 406                         output-low;
 407                         bias-disable;
 408                 };
 409
 410                 sdhc1_pin_a: sdhc1-pin-active {
 411                         clk {
 412                                 pins = "sdc1_clk";
 413                                 drive-strength = <16>;
 414                                 bias-disable;
 415                         };
 416
 417                         cmd-data {
 418                                 pins = "sdc1_cmd", "sdc1_data";
 419                                 drive-strength = <10>;
 420                                 bias-pull-up;
 421                         };
 422                 };
 423
 424                 sdhc2_cd_pin_a: sdhc2-cd-pin-active {
 425                         pins = "gpio62";
 426                         function = "gpio";
 427
 428                         drive-strength = <2>;
 429                         bias-disable;
 430                  };
 431
 432                 sdhc2_pin_a: sdhc2-pin-active {
 433                         clk {
 434                                 pins = "sdc2_clk";
 435                                 drive-strength = <6>;
 436                                 bias-disable;
 437                         };
 438
 439                         cmd-data {
 440                                 pins = "sdc2_cmd", "sdc2_data";
 441                                 drive-strength = <6>;
 442                                 bias-pull-up;
 443                         };
 444                 };
 445
 446                 sdhc3_pin_a: sdhc3-pin-active {
 447                         clk {
 448                                 pins = "gpio40";
 449                                 function = "sdc3";
 450
 451                                 drive-strength = <10>;
 452                                 bias-disable;
 453                         };
 454
 455                         cmd {
 456                                 pins = "gpio39";
 457                                 function = "sdc3";
 458
 459                                 drive-strength = <10>;
 460                                 bias-pull-up;
 461                         };
 462
 463                         data {
 464                                 pins = "gpio35", "gpio36", "gpio37", "gpio38";
 465                                 function = "sdc3";
 466
 467                                 drive-strength = <10>;
 468                                 bias-pull-up;
 469                         };
 470                 };
 471
 472                 ts_int_pin: synaptics {
 473                         pin {
 474                                 pins = "gpio86";
 475                                 function = "gpio";
 476
 477                                 drive-strength = <2>;
 478                                 bias-disable;
 479                                 input-enable;
 480                         };
 481                 };
 482         };
 483
 484         i2c@f9964000 {
 485                 status = "ok";
 486
 487                 clock-frequency = <355000>;
 488                 qcom,src-freq = <50000000>;
 489
 490                 pinctrl-names = "default";
 491                 pinctrl-0 = <&i2c8_pins>;
 492
 493                 synaptics@2c {
 494                         compatible = "syna,rmi4-i2c";
 495                         reg = <0x2c>;
 496
 497                         interrupt-parent = <&msmgpio>;
 498                         interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
 499
 500                         #address-cells = <1>;
 501                         #size-cells = <0>;
 502
 503                         vdd-supply = <&pm8941_l22>;
 504                         vio-supply = <&pm8941_lvs3>;
 505
 506                         pinctrl-names = "default";
 507                         pinctrl-0 = <&ts_int_pin>;
 508
 509                         syna,startup-delay-ms = <10>;
 510
 511                         rmi-f01@1 {
 512                                 reg = <0x1>;
 513                                 syna,nosleep = <1>;
 514                         };
 515
 516                         rmi-f11@11 {
 517                                 reg = <0x11>;
 518                                 syna,f11-flip-x = <1>;
 519                                 syna,sensor-type = <1>;
 520                         };
 521                 };
 522         };
 523
 524         i2c@f9967000 {
 525                 status = "ok";
 526                 pinctrl-names = "default";
 527                 pinctrl-0 = <&i2c11_pins>;
 528                 clock-frequency = <355000>;
 529                 qcom,src-freq = <50000000>;
 530
 531                 lp8566_wled: backlight@2c {
 532                         compatible = "ti,lp8556";
 533                         reg = <0x2c>;
 534                         power-supply = <&vreg_bl_vddio>;
 535
 536                         bl-name = "backlight";
 537                         dev-ctrl = /bits/ 8 <0x05>;
 538                         init-brt = /bits/ 8 <0x3f>;
 539                         rom_a0h {
 540                                 rom-addr = /bits/ 8 <0xa0>;
 541                                 rom-val = /bits/ 8 <0xff>;
 542                         };
 543                         rom_a1h {
 544                                 rom-addr = /bits/ 8 <0xa1>;
 545                                 rom-val = /bits/ 8 <0x3f>;
 546                         };
 547                         rom_a2h {
 548                                 rom-addr = /bits/ 8 <0xa2>;
 549                                 rom-val = /bits/ 8 <0x20>;
 550                         };
 551                         rom_a3h {
 552                                 rom-addr = /bits/ 8 <0xa3>;
 553                                 rom-val = /bits/ 8 <0x5e>;
 554                         };
 555                         rom_a4h {
 556                                 rom-addr = /bits/ 8 <0xa4>;
 557                                 rom-val = /bits/ 8 <0x02>;
 558                         };
 559                         rom_a5h {
 560                                 rom-addr = /bits/ 8 <0xa5>;
 561                                 rom-val = /bits/ 8 <0x04>;
 562                         };
 563                         rom_a6h {
 564                                 rom-addr = /bits/ 8 <0xa6>;
 565                                 rom-val = /bits/ 8 <0x80>;
 566                         };
 567                         rom_a7h {
 568                                 rom-addr = /bits/ 8 <0xa7>;
 569                                 rom-val = /bits/ 8 <0xf7>;
 570                         };
 571                         rom_a9h {
 572                                 rom-addr = /bits/ 8 <0xa9>;
 573                                 rom-val = /bits/ 8 <0x80>;
 574                         };
 575                         rom_aah {
 576                                 rom-addr = /bits/ 8 <0xaa>;
 577                                 rom-val = /bits/ 8 <0x0f>;
 578                         };
 579                         rom_aeh {
 580                                 rom-addr = /bits/ 8 <0xae>;
 581                                 rom-val = /bits/ 8 <0x0f>;
 582                         };
 583                 };
 584         };
 585 };
 586
 587 &spmi_bus {
 588         pm8941@0 {
 589                 charger@1000 {
 590                         qcom,fast-charge-safe-current = <1500000>;
 591                         qcom,fast-charge-current-limit = <1500000>;
 592                         qcom,dc-current-limit = <1800000>;
 593                         qcom,fast-charge-safe-voltage = <4400000>;
 594                         qcom,fast-charge-high-threshold-voltage = <4350000>;
 595                         qcom,fast-charge-low-threshold-voltage = <3400000>;
 596                         qcom,auto-recharge-threshold-voltage = <4200000>;
 597                         qcom,minimum-input-voltage = <4300000>;
 598                 };
 599
 600                 gpios@c000 {
 601                         gpio_keys_pin_a: gpio-keys-active {
 602                                 pins = "gpio2", "gpio5";
 603                                 function = "normal";
 604
 605                                 bias-pull-up;
 606                                 power-source = <PM8941_GPIO_S3>;
 607                         };
 608
 609                         wlan_sleep_clk_pin: wl-sleep-clk {
 610                                 pins = "gpio17";
 611                                 function = "func2";
 612
 613                                 output-high;
 614                                 power-source = <PM8941_GPIO_S3>;
 615                         };
 616
 617                         wlan_regulator_pin: wl-reg-active {
 618                                 pins = "gpio18";
 619                                 function = "normal";
 620
 621                                 bias-disable;
 622                                 power-source = <PM8941_GPIO_S3>;
 623                         };
 624
 625                         lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
 626                                 pins = "gpio20";
 627                                 function = "normal";
 628
 629                                 bias-disable;
 630                                 power-source = <PM8941_GPIO_S3>;
 631                                 input-disable;
 632                                 output-low;
 633                         };
 634
 635                 };
 636
 637                 coincell@2800 {
 638                         status = "ok";
 639                         qcom,rset-ohms = <2100>;
 640                         qcom,vset-millivolts = <3000>;
 641                 };
 642         };
 643 };