]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
[mirror_ubuntu-bionic-kernel.git] / arch / arm / boot / dts / qcom-msm8974-sony-xperia-honami.dts
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974.dtsi"
3 #include "qcom-pm8841.dtsi"
4 #include "qcom-pm8941.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9 / {
10 model = "Sony Xperia Z1";
11 compatible = "sony,xperia-honami", "qcom,msm8974";
12
13 aliases {
14 serial0 = &blsp1_uart2;
15 };
16
17 chosen {
18 stdout-path = "serial0:115200n8";
19 };
20
21 gpio-keys {
22 compatible = "gpio-keys";
23 input-name = "gpio-keys";
24
25 pinctrl-names = "default";
26 pinctrl-0 = <&gpio_keys_pin_a>;
27
28 volume-down {
29 label = "volume_down";
30 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
31 linux,input-type = <1>;
32 linux,code = <KEY_VOLUMEDOWN>;
33 };
34
35 camera-snapshot {
36 label = "camera_snapshot";
37 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
38 linux,input-type = <1>;
39 linux,code = <KEY_CAMERA>;
40 };
41
42 camera-focus {
43 label = "camera_focus";
44 gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
45 linux,input-type = <1>;
46 linux,code = <KEY_CAMERA_FOCUS>;
47 };
48
49 volume-up {
50 label = "volume_up";
51 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
52 linux,input-type = <1>;
53 linux,code = <KEY_VOLUMEUP>;
54 };
55 };
56
57 memory@0 {
58 reg = <0 0x40000000>, <0x40000000 0x40000000>;
59 device_type = "memory";
60 };
61
62 smd {
63 rpm {
64 rpm_requests {
65 pm8841-regulators {
66 s1 {
67 regulator-min-microvolt = <675000>;
68 regulator-max-microvolt = <1050000>;
69 };
70
71 s2 {
72 regulator-min-microvolt = <500000>;
73 regulator-max-microvolt = <1050000>;
74 };
75
76 s3 {
77 regulator-min-microvolt = <500000>;
78 regulator-max-microvolt = <1050000>;
79 };
80
81 s4 {
82 regulator-min-microvolt = <500000>;
83 regulator-max-microvolt = <1050000>;
84 };
85 };
86
87 pm8941-regulators {
88 vdd_l1_l3-supply = <&pm8941_s1>;
89 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
90 vdd_l4_l11-supply = <&pm8941_s1>;
91 vdd_l5_l7-supply = <&pm8941_s2>;
92 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
93 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
94 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
95 vdd_l21-supply = <&vreg_boost>;
96
97 s1 {
98 regulator-min-microvolt = <1300000>;
99 regulator-max-microvolt = <1300000>;
100 regulator-always-on;
101 regulator-boot-on;
102 };
103
104 s2 {
105 regulator-min-microvolt = <2150000>;
106 regulator-max-microvolt = <2150000>;
107 regulator-boot-on;
108 };
109
110 s3 {
111 regulator-min-microvolt = <1800000>;
112 regulator-max-microvolt = <1800000>;
113 regulator-always-on;
114 regulator-boot-on;
115 };
116
117 s4 {
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 };
121
122 l1 {
123 regulator-min-microvolt = <1225000>;
124 regulator-max-microvolt = <1225000>;
125
126 regulator-always-on;
127 regulator-boot-on;
128 };
129
130 l2 {
131 regulator-min-microvolt = <1200000>;
132 regulator-max-microvolt = <1200000>;
133 };
134
135 l3 {
136 regulator-min-microvolt = <1200000>;
137 regulator-max-microvolt = <1200000>;
138 };
139
140 l4 {
141 regulator-min-microvolt = <1225000>;
142 regulator-max-microvolt = <1225000>;
143 };
144
145 l5 {
146 regulator-min-microvolt = <1800000>;
147 regulator-max-microvolt = <1800000>;
148 };
149
150 l6 {
151 regulator-min-microvolt = <1800000>;
152 regulator-max-microvolt = <1800000>;
153
154 regulator-boot-on;
155 };
156
157 l7 {
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <1800000>;
160
161 regulator-boot-on;
162 };
163
164 l8 {
165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvolt = <1800000>;
167 };
168
169 l9 {
170 regulator-min-microvolt = <1800000>;
171 regulator-max-microvolt = <2950000>;
172 };
173
174 l11 {
175 regulator-min-microvolt = <1300000>;
176 regulator-max-microvolt = <1350000>;
177 };
178
179 l12 {
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <1800000>;
182
183 regulator-always-on;
184 regulator-boot-on;
185 };
186
187 l13 {
188 regulator-min-microvolt = <1800000>;
189 regulator-max-microvolt = <2950000>;
190
191 regulator-boot-on;
192 };
193
194 l14 {
195 regulator-min-microvolt = <1800000>;
196 regulator-max-microvolt = <1800000>;
197 };
198
199 l15 {
200 regulator-min-microvolt = <2050000>;
201 regulator-max-microvolt = <2050000>;
202 };
203
204 l16 {
205 regulator-min-microvolt = <2700000>;
206 regulator-max-microvolt = <2700000>;
207 };
208
209 l17 {
210 regulator-min-microvolt = <2700000>;
211 regulator-max-microvolt = <2700000>;
212 };
213
214 l18 {
215 regulator-min-microvolt = <2850000>;
216 regulator-max-microvolt = <2850000>;
217 };
218
219 l19 {
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222 };
223
224 l20 {
225 regulator-min-microvolt = <2950000>;
226 regulator-max-microvolt = <2950000>;
227
228 regulator-allow-set-load;
229 regulator-boot-on;
230 regulator-system-load = <200000>;
231 };
232
233 l21 {
234 regulator-min-microvolt = <2950000>;
235 regulator-max-microvolt = <2950000>;
236
237 regulator-boot-on;
238 };
239
240 l22 {
241 regulator-min-microvolt = <3000000>;
242 regulator-max-microvolt = <3000000>;
243 };
244
245 l23 {
246 regulator-min-microvolt = <2800000>;
247 regulator-max-microvolt = <2800000>;
248 };
249
250 l24 {
251 regulator-min-microvolt = <3075000>;
252 regulator-max-microvolt = <3075000>;
253
254 regulator-boot-on;
255 };
256 };
257 };
258 };
259 };
260 };
261
262 &soc {
263 sdhci@f9824900 {
264 status = "ok";
265
266 vmmc-supply = <&pm8941_l20>;
267 vqmmc-supply = <&pm8941_s3>;
268
269 bus-width = <8>;
270 non-removable;
271
272 pinctrl-names = "default";
273 pinctrl-0 = <&sdhc1_pin_a>;
274 };
275
276 sdhci@f98a4900 {
277 status = "ok";
278
279 bus-width = <4>;
280
281 vmmc-supply = <&pm8941_l21>;
282 vqmmc-supply = <&pm8941_l13>;
283
284 cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
285
286 pinctrl-names = "default";
287 pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
288 };
289
290 serial@f991e000 {
291 status = "ok";
292
293 pinctrl-names = "default";
294 pinctrl-0 = <&blsp1_uart2_pin_a>;
295 };
296
297 i2c@f9924000 {
298 status = "ok";
299
300 clock-frequency = <355000>;
301 qcom,src-freq = <50000000>;
302
303 pinctrl-names = "default";
304 pinctrl-0 = <&i2c2_pins>;
305
306 synaptics@2c {
307 compatible = "syna,rmi4-i2c";
308 reg = <0x2c>;
309
310 interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
311
312 #address-cells = <1>;
313 #size-cells = <0>;
314
315 vdd-supply = <&pm8941_l22>;
316 vio-supply = <&pm8941_lvs3>;
317
318 pinctrl-names = "default";
319 pinctrl-0 = <&ts_int_pin>;
320
321 syna,startup-delay-ms = <10>;
322
323 rmi4-f01@1 {
324 reg = <0x1>;
325 syna,nosleep-mode = <1>;
326 };
327
328 rmi4-f11@11 {
329 reg = <0x11>;
330 touchscreen-inverted-x;
331 syna,sensor-type = <1>;
332 };
333 };
334 };
335
336 pinctrl@fd510000 {
337 blsp1_uart2_pin_a: blsp1-uart2-pin-active {
338 rx {
339 pins = "gpio5";
340 function = "blsp_uart2";
341
342 drive-strength = <2>;
343 bias-pull-up;
344 };
345
346 tx {
347 pins = "gpio4";
348 function = "blsp_uart2";
349
350 drive-strength = <4>;
351 bias-disable;
352 };
353 };
354
355 i2c2_pins: i2c2 {
356 mux {
357 pins = "gpio6", "gpio7";
358 function = "blsp_i2c2";
359
360 drive-strength = <2>;
361 bias-disable;
362 };
363 };
364
365 sdhc1_pin_a: sdhc1-pin-active {
366 clk {
367 pins = "sdc1_clk";
368 drive-strength = <16>;
369 bias-disable;
370 };
371
372 cmd-data {
373 pins = "sdc1_cmd", "sdc1_data";
374 drive-strength = <10>;
375 bias-pull-up;
376 };
377 };
378
379 sdhc2_cd_pin_a: sdhc2-cd-pin-active {
380 pins = "gpio62";
381 function = "gpio";
382
383 drive-strength = <2>;
384 bias-disable;
385 };
386
387 sdhc2_pin_a: sdhc2-pin-active {
388 clk {
389 pins = "sdc2_clk";
390 drive-strength = <10>;
391 bias-disable;
392 };
393
394 cmd-data {
395 pins = "sdc2_cmd", "sdc2_data";
396 drive-strength = <6>;
397 bias-pull-up;
398 };
399 };
400
401 ts_int_pin: touch-int {
402 pin {
403 pins = "gpio61";
404 function = "gpio";
405
406 drive-strength = <2>;
407 bias-disable;
408 input-enable;
409 };
410 };
411 };
412
413 dma-controller@f9944000 {
414 qcom,controlled-remotely;
415 };
416 };
417
418 &spmi_bus {
419 pm8941@0 {
420 charger@1000 {
421 qcom,fast-charge-safe-current = <1500000>;
422 qcom,fast-charge-current-limit = <1500000>;
423 qcom,dc-current-limit = <1800000>;
424 qcom,fast-charge-safe-voltage = <4400000>;
425 qcom,fast-charge-high-threshold-voltage = <4350000>;
426 qcom,fast-charge-low-threshold-voltage = <3400000>;
427 qcom,auto-recharge-threshold-voltage = <4200000>;
428 qcom,minimum-input-voltage = <4300000>;
429 };
430
431 gpios@c000 {
432 gpio_keys_pin_a: gpio-keys-active {
433 pins = "gpio2", "gpio3", "gpio4", "gpio5";
434 function = "normal";
435
436 bias-pull-up;
437 power-source = <PM8941_GPIO_S3>;
438 };
439 };
440
441 coincell@2800 {
442 status = "ok";
443 qcom,rset-ohms = <2100>;
444 qcom,vset-millivolts = <3000>;
445 };
446 };
447
448 pm8941@1 {
449 wled@d800 {
450 status = "ok";
451
452 qcom,cs-out;
453 qcom,current-limit = <20>;
454 qcom,current-boost-limit = <805>;
455 qcom,switching-freq = <1600>;
456 qcom,ovp = <29>;
457 qcom,num-strings = <2>;
458 };
459 };
460 };