arch/arm/boot/dts/qcom-msm8974.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/interrupt-controller/arm-gic.h>
   5 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
   6 #include <dt-bindings/clock/qcom,rpmcc.h>
   7 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include "skeleton.dtsi"
  10
  11 / {
  12         model = "Qualcomm MSM8974";
  13         compatible = "qcom,msm8974";
  14         interrupt-parent = <&intc>;
  15
  16         reserved-memory {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 ranges;
  20
  21                 mpss@08000000 {
  22                         reg = <0x08000000 0x5100000>;
  23                         no-map;
  24                 };
  25
  26                 mba@00d100000 {
  27                         reg = <0x0d100000 0x100000>;
  28                         no-map;
  29                 };
  30
  31                 reserved@0d200000 {
  32                         reg = <0x0d200000 0xa00000>;
  33                         no-map;
  34                 };
  35
  36                 adsp_region: adsp@0dc00000 {
  37                         reg = <0x0dc00000 0x1900000>;
  38                         no-map;
  39                 };
  40
  41                 venus@0f500000 {
  42                         reg = <0x0f500000 0x500000>;
  43                         no-map;
  44                 };
  45
  46                 smem_region: smem@fa00000 {
  47                         reg = <0xfa00000 0x200000>;
  48                         no-map;
  49                 };
  50
  51                 tz@0fc00000 {
  52                         reg = <0x0fc00000 0x160000>;
  53                         no-map;
  54                 };
  55
  56                 rfsa@0fd60000 {
  57                         reg = <0x0fd60000 0x20000>;
  58                         no-map;
  59                 };
  60
  61                 rmtfs@0fd80000 {
  62                         reg = <0x0fd80000 0x180000>;
  63                         no-map;
  64                 };
  65         };
  66
  67         cpus {
  68                 #address-cells = <1>;
  69                 #size-cells = <0>;
  70                 interrupts = <1 9 0xf04>;
  71
  72                 CPU0: cpu@0 {
  73                         compatible = "qcom,krait";
  74                         enable-method = "qcom,kpss-acc-v2";
  75                         device_type = "cpu";
  76                         reg = <0>;
  77                         next-level-cache = <&L2>;
  78                         qcom,acc = <&acc0>;
  79                         qcom,saw = <&saw0>;
  80                         cpu-idle-states = <&CPU_SPC>;
  81                 };
  82
  83                 CPU1: cpu@1 {
  84                         compatible = "qcom,krait";
  85                         enable-method = "qcom,kpss-acc-v2";
  86                         device_type = "cpu";
  87                         reg = <1>;
  88                         next-level-cache = <&L2>;
  89                         qcom,acc = <&acc1>;
  90                         qcom,saw = <&saw1>;
  91                         cpu-idle-states = <&CPU_SPC>;
  92                 };
  93
  94                 CPU2: cpu@2 {
  95                         compatible = "qcom,krait";
  96                         enable-method = "qcom,kpss-acc-v2";
  97                         device_type = "cpu";
  98                         reg = <2>;
  99                         next-level-cache = <&L2>;
 100                         qcom,acc = <&acc2>;
 101                         qcom,saw = <&saw2>;
 102                         cpu-idle-states = <&CPU_SPC>;
 103                 };
 104
 105                 CPU3: cpu@3 {
 106                         compatible = "qcom,krait";
 107                         enable-method = "qcom,kpss-acc-v2";
 108                         device_type = "cpu";
 109                         reg = <3>;
 110                         next-level-cache = <&L2>;
 111                         qcom,acc = <&acc3>;
 112                         qcom,saw = <&saw3>;
 113                         cpu-idle-states = <&CPU_SPC>;
 114                 };
 115
 116                 L2: l2-cache {
 117                         compatible = "cache";
 118                         cache-level = <2>;
 119                         qcom,saw = <&saw_l2>;
 120                 };
 121
 122                 idle-states {
 123                         CPU_SPC: spc {
 124                                 compatible = "qcom,idle-state-spc",
 125                                                 "arm,idle-state";
 126                                 entry-latency-us = <150>;
 127                                 exit-latency-us = <200>;
 128                                 min-residency-us = <2000>;
 129                         };
 130                 };
 131         };
 132
 133         thermal-zones {
 134                 cpu-thermal0 {
 135                         polling-delay-passive = <250>;
 136                         polling-delay = <1000>;
 137
 138                         thermal-sensors = <&tsens 5>;
 139
 140                         trips {
 141                                 cpu_alert0: trip0 {
 142                                         temperature = <75000>;
 143                                         hysteresis = <2000>;
 144                                         type = "passive";
 145                                 };
 146                                 cpu_crit0: trip1 {
 147                                         temperature = <110000>;
 148                                         hysteresis = <2000>;
 149                                         type = "critical";
 150                                 };
 151                         };
 152                 };
 153
 154                 cpu-thermal1 {
 155                         polling-delay-passive = <250>;
 156                         polling-delay = <1000>;
 157
 158                         thermal-sensors = <&tsens 6>;
 159
 160                         trips {
 161                                 cpu_alert1: trip0 {
 162                                         temperature = <75000>;
 163                                         hysteresis = <2000>;
 164                                         type = "passive";
 165                                 };
 166                                 cpu_crit1: trip1 {
 167                                         temperature = <110000>;
 168                                         hysteresis = <2000>;
 169                                         type = "critical";
 170                                 };
 171                         };
 172                 };
 173
 174                 cpu-thermal2 {
 175                         polling-delay-passive = <250>;
 176                         polling-delay = <1000>;
 177
 178                         thermal-sensors = <&tsens 7>;
 179
 180                         trips {
 181                                 cpu_alert2: trip0 {
 182                                         temperature = <75000>;
 183                                         hysteresis = <2000>;
 184                                         type = "passive";
 185                                 };
 186                                 cpu_crit2: trip1 {
 187                                         temperature = <110000>;
 188                                         hysteresis = <2000>;
 189                                         type = "critical";
 190                                 };
 191                         };
 192                 };
 193
 194                 cpu-thermal3 {
 195                         polling-delay-passive = <250>;
 196                         polling-delay = <1000>;
 197
 198                         thermal-sensors = <&tsens 8>;
 199
 200                         trips {
 201                                 cpu_alert3: trip0 {
 202                                         temperature = <75000>;
 203                                         hysteresis = <2000>;
 204                                         type = "passive";
 205                                 };
 206                                 cpu_crit3: trip1 {
 207                                         temperature = <110000>;
 208                                         hysteresis = <2000>;
 209                                         type = "critical";
 210                                 };
 211                         };
 212                 };
 213         };
 214
 215         cpu-pmu {
 216                 compatible = "qcom,krait-pmu";
 217                 interrupts = <1 7 0xf04>;
 218         };
 219
 220         clocks {
 221                 xo_board: xo_board {
 222                         compatible = "fixed-clock";
 223                         #clock-cells = <0>;
 224                         clock-frequency = <19200000>;
 225                 };
 226
 227                 sleep_clk: sleep_clk {
 228                         compatible = "fixed-clock";
 229                         #clock-cells = <0>;
 230                         clock-frequency = <32768>;
 231                 };
 232         };
 233
 234         timer {
 235                 compatible = "arm,armv7-timer";
 236                 interrupts = <1 2 0xf08>,
 237                              <1 3 0xf08>,
 238                              <1 4 0xf08>,
 239                              <1 1 0xf08>;
 240                 clock-frequency = <19200000>;
 241         };
 242
 243         adsp-pil {
 244                 compatible = "qcom,msm8974-adsp-pil";
 245
 246                 interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
 247                                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 248                                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 249                                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 250                                       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 251                 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 252
 253                 cx-supply = <&pm8841_s2>;
 254
 255                 clocks = <&xo_board>;
 256                 clock-names = "xo";
 257
 258                 memory-region = <&adsp_region>;
 259
 260                 qcom,smem-states = <&adsp_smp2p_out 0>;
 261                 qcom,smem-state-names = "stop";
 262         };
 263
 264         smem {
 265                 compatible = "qcom,smem";
 266
 267                 memory-region = <&smem_region>;
 268                 qcom,rpm-msg-ram = <&rpm_msg_ram>;
 269
 270                 hwlocks = <&tcsr_mutex 3>;
 271         };
 272
 273         smp2p-adsp {
 274                 compatible = "qcom,smp2p";
 275                 qcom,smem = <443>, <429>;
 276
 277                 interrupt-parent = <&intc>;
 278                 interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
 279
 280                 qcom,ipc = <&apcs 8 10>;
 281
 282                 qcom,local-pid = <0>;
 283                 qcom,remote-pid = <2>;
 284
 285                 adsp_smp2p_out: master-kernel {
 286                         qcom,entry-name = "master-kernel";
 287                         #qcom,smem-state-cells = <1>;
 288                 };
 289
 290                 adsp_smp2p_in: slave-kernel {
 291                         qcom,entry-name = "slave-kernel";
 292
 293                         interrupt-controller;
 294                         #interrupt-cells = <2>;
 295                 };
 296         };
 297
 298         smp2p-modem {
 299                 compatible = "qcom,smp2p";
 300                 qcom,smem = <435>, <428>;
 301
 302                 interrupt-parent = <&intc>;
 303                 interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
 304
 305                 qcom,ipc = <&apcs 8 14>;
 306
 307                 qcom,local-pid = <0>;
 308                 qcom,remote-pid = <1>;
 309
 310                 modem_smp2p_out: master-kernel {
 311                         qcom,entry-name = "master-kernel";
 312                         #qcom,smem-state-cells = <1>;
 313                 };
 314
 315                 modem_smp2p_in: slave-kernel {
 316                         qcom,entry-name = "slave-kernel";
 317
 318                         interrupt-controller;
 319                         #interrupt-cells = <2>;
 320                 };
 321         };
 322
 323         smp2p-wcnss {
 324                 compatible = "qcom,smp2p";
 325                 qcom,smem = <451>, <431>;
 326
 327                 interrupt-parent = <&intc>;
 328                 interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
 329
 330                 qcom,ipc = <&apcs 8 18>;
 331
 332                 qcom,local-pid = <0>;
 333                 qcom,remote-pid = <4>;
 334
 335                 wcnss_smp2p_out: master-kernel {
 336                         qcom,entry-name = "master-kernel";
 337
 338                         #qcom,smem-state-cells = <1>;
 339                 };
 340
 341                 wcnss_smp2p_in: slave-kernel {
 342                         qcom,entry-name = "slave-kernel";
 343
 344                         interrupt-controller;
 345                         #interrupt-cells = <2>;
 346                 };
 347         };
 348
 349         smsm {
 350                 compatible = "qcom,smsm";
 351
 352                 #address-cells = <1>;
 353                 #size-cells = <0>;
 354
 355                 qcom,ipc-1 = <&apcs 8 13>;
 356                 qcom,ipc-2 = <&apcs 8 9>;
 357                 qcom,ipc-3 = <&apcs 8 19>;
 358
 359                 apps_smsm: apps@0 {
 360                         reg = <0>;
 361
 362                         #qcom,smem-state-cells = <1>;
 363                 };
 364
 365                 modem_smsm: modem@1 {
 366                         reg = <1>;
 367                         interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
 368
 369                         interrupt-controller;
 370                         #interrupt-cells = <2>;
 371                 };
 372
 373                 adsp_smsm: adsp@2 {
 374                         reg = <2>;
 375                         interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
 376
 377                         interrupt-controller;
 378                         #interrupt-cells = <2>;
 379                 };
 380
 381                 wcnss_smsm: wcnss@7 {
 382                         reg = <7>;
 383                         interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
 384
 385                         interrupt-controller;
 386                         #interrupt-cells = <2>;
 387                 };
 388         };
 389
 390         firmware {
 391                 scm {
 392                         compatible = "qcom,scm";
 393                         clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 394                         clock-names = "core", "bus", "iface";
 395                 };
 396         };
 397
 398         soc: soc {
 399                 #address-cells = <1>;
 400                 #size-cells = <1>;
 401                 ranges;
 402                 compatible = "simple-bus";
 403
 404                 intc: interrupt-controller@f9000000 {
 405                         compatible = "qcom,msm-qgic2";
 406                         interrupt-controller;
 407                         #interrupt-cells = <3>;
 408                         reg = <0xf9000000 0x1000>,
 409                               <0xf9002000 0x1000>;
 410                 };
 411
 412                 apcs: syscon@f9011000 {
 413                         compatible = "syscon";
 414                         reg = <0xf9011000 0x1000>;
 415                 };
 416
 417                 qfprom: qfprom@fc4bc000 {
 418                         #address-cells = <1>;
 419                         #size-cells = <1>;
 420                         compatible = "qcom,qfprom";
 421                         reg = <0xfc4bc000 0x1000>;
 422                         tsens_calib: calib@d0 {
 423                                 reg = <0xd0 0x18>;
 424                         };
 425                         tsens_backup: backup@440 {
 426                                 reg = <0x440 0x10>;
 427                         };
 428                 };
 429
 430                 tsens: thermal-sensor@fc4a8000 {
 431                         compatible = "qcom,msm8974-tsens";
 432                         reg = <0xfc4a8000 0x2000>;
 433                         nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 434                         nvmem-cell-names = "calib", "calib_backup";
 435                         #thermal-sensor-cells = <1>;
 436                 };
 437
 438                 timer@f9020000 {
 439                         #address-cells = <1>;
 440                         #size-cells = <1>;
 441                         ranges;
 442                         compatible = "arm,armv7-timer-mem";
 443                         reg = <0xf9020000 0x1000>;
 444                         clock-frequency = <19200000>;
 445
 446                         frame@f9021000 {
 447                                 frame-number = <0>;
 448                                 interrupts = <0 8 0x4>,
 449                                              <0 7 0x4>;
 450                                 reg = <0xf9021000 0x1000>,
 451                                       <0xf9022000 0x1000>;
 452                         };
 453
 454                         frame@f9023000 {
 455                                 frame-number = <1>;
 456                                 interrupts = <0 9 0x4>;
 457                                 reg = <0xf9023000 0x1000>;
 458                                 status = "disabled";
 459                         };
 460
 461                         frame@f9024000 {
 462                                 frame-number = <2>;
 463                                 interrupts = <0 10 0x4>;
 464                                 reg = <0xf9024000 0x1000>;
 465                                 status = "disabled";
 466                         };
 467
 468                         frame@f9025000 {
 469                                 frame-number = <3>;
 470                                 interrupts = <0 11 0x4>;
 471                                 reg = <0xf9025000 0x1000>;
 472                                 status = "disabled";
 473                         };
 474
 475                         frame@f9026000 {
 476                                 frame-number = <4>;
 477                                 interrupts = <0 12 0x4>;
 478                                 reg = <0xf9026000 0x1000>;
 479                                 status = "disabled";
 480                         };
 481
 482                         frame@f9027000 {
 483                                 frame-number = <5>;
 484                                 interrupts = <0 13 0x4>;
 485                                 reg = <0xf9027000 0x1000>;
 486                                 status = "disabled";
 487                         };
 488
 489                         frame@f9028000 {
 490                                 frame-number = <6>;
 491                                 interrupts = <0 14 0x4>;
 492                                 reg = <0xf9028000 0x1000>;
 493                                 status = "disabled";
 494                         };
 495                 };
 496
 497                 saw0: power-controller@f9089000 {
 498                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 499                         reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 500                 };
 501
 502                 saw1: power-controller@f9099000 {
 503                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 504                         reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 505                 };
 506
 507                 saw2: power-controller@f90a9000 {
 508                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 509                         reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 510                 };
 511
 512                 saw3: power-controller@f90b9000 {
 513                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 514                         reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 515                 };
 516
 517                 saw_l2: power-controller@f9012000 {
 518                         compatible = "qcom,saw2";
 519                         reg = <0xf9012000 0x1000>;
 520                         regulator;
 521                 };
 522
 523                 acc0: clock-controller@f9088000 {
 524                         compatible = "qcom,kpss-acc-v2";
 525                         reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 526                 };
 527
 528                 acc1: clock-controller@f9098000 {
 529                         compatible = "qcom,kpss-acc-v2";
 530                         reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 531                 };
 532
 533                 acc2: clock-controller@f90a8000 {
 534                         compatible = "qcom,kpss-acc-v2";
 535                         reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 536                 };
 537
 538                 acc3: clock-controller@f90b8000 {
 539                         compatible = "qcom,kpss-acc-v2";
 540                         reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 541                 };
 542
 543                 restart@fc4ab000 {
 544                         compatible = "qcom,pshold";
 545                         reg = <0xfc4ab000 0x4>;
 546                 };
 547
 548                 gcc: clock-controller@fc400000 {
 549                         compatible = "qcom,gcc-msm8974";
 550                         #clock-cells = <1>;
 551                         #reset-cells = <1>;
 552                         #power-domain-cells = <1>;
 553                         reg = <0xfc400000 0x4000>;
 554                 };
 555
 556                 tcsr: syscon@fd4a0000 {
 557                         compatible = "syscon";
 558                         reg = <0xfd4a0000 0x10000>;
 559                 };
 560
 561                 tcsr_mutex_block: syscon@fd484000 {
 562                         compatible = "syscon";
 563                         reg = <0xfd484000 0x2000>;
 564                 };
 565
 566                 mmcc: clock-controller@fd8c0000 {
 567                         compatible = "qcom,mmcc-msm8974";
 568                         #clock-cells = <1>;
 569                         #reset-cells = <1>;
 570                         #power-domain-cells = <1>;
 571                         reg = <0xfd8c0000 0x6000>;
 572                 };
 573
 574                 tcsr_mutex: tcsr-mutex {
 575                         compatible = "qcom,tcsr-mutex";
 576                         syscon = <&tcsr_mutex_block 0 0x80>;
 577
 578                         #hwlock-cells = <1>;
 579                 };
 580
 581                 rpm_msg_ram: memory@fc428000 {
 582                         compatible = "qcom,rpm-msg-ram";
 583                         reg = <0xfc428000 0x4000>;
 584                 };
 585
 586                 blsp1_uart1: serial@f991d000 {
 587                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 588                         reg = <0xf991d000 0x1000>;
 589                         interrupts = <0 107 0x0>;
 590                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 591                         clock-names = "core", "iface";
 592                         status = "disabled";
 593                 };
 594
 595                 blsp1_uart2: serial@f991e000 {
 596                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 597                         reg = <0xf991e000 0x1000>;
 598                         interrupts = <0 108 0x0>;
 599                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 600                         clock-names = "core", "iface";
 601                         status = "disabled";
 602                 };
 603
 604                 sdhci@f9824900 {
 605                         compatible = "qcom,sdhci-msm-v4";
 606                         reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 607                         reg-names = "hc_mem", "core_mem";
 608                         interrupts = <0 123 0>, <0 138 0>;
 609                         interrupt-names = "hc_irq", "pwr_irq";
 610                         clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 611                                  <&gcc GCC_SDCC1_AHB_CLK>,
 612                                  <&xo_board>;
 613                         clock-names = "core", "iface", "xo";
 614                         status = "disabled";
 615                 };
 616
 617                 sdhci@f98a4900 {
 618                         compatible = "qcom,sdhci-msm-v4";
 619                         reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 620                         reg-names = "hc_mem", "core_mem";
 621                         interrupts = <0 125 0>, <0 221 0>;
 622                         interrupt-names = "hc_irq", "pwr_irq";
 623                         clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 624                                  <&gcc GCC_SDCC2_AHB_CLK>,
 625                                  <&xo_board>;
 626                         clock-names = "core", "iface", "xo";
 627                         status = "disabled";
 628                 };
 629
 630                 otg: usb@f9a55000 {
 631                         compatible = "qcom,ci-hdrc";
 632                         reg = <0xf9a55000 0x200>,
 633                               <0xf9a55200 0x200>;
 634                         interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 635                         clocks = <&gcc GCC_USB_HS_AHB_CLK>,
 636                                  <&gcc GCC_USB_HS_SYSTEM_CLK>;
 637                         clock-names = "iface", "core";
 638                         assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
 639                         assigned-clock-rates = <75000000>;
 640                         resets = <&gcc GCC_USB_HS_BCR>;
 641                         reset-names = "core";
 642                         phy_type = "ulpi";
 643                         dr_mode = "otg";
 644                         ahb-burst-config = <0>;
 645                         phy-names = "usb-phy";
 646                         status = "disabled";
 647                         #reset-cells = <1>;
 648
 649                         ulpi {
 650                                 usb_hs1_phy: phy@a {
 651                                         compatible = "qcom,usb-hs-phy-msm8974",
 652                                                      "qcom,usb-hs-phy";
 653                                         #phy-cells = <0>;
 654                                         clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 655                                         clock-names = "ref", "sleep";
 656                                         resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
 657                                         reset-names = "phy", "por";
 658                                         status = "disabled";
 659                                 };
 660
 661                                 usb_hs2_phy: phy@b {
 662                                         compatible = "qcom,usb-hs-phy-msm8974",
 663                                                      "qcom,usb-hs-phy";
 664                                         #phy-cells = <0>;
 665                                         clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
 666                                         clock-names = "ref", "sleep";
 667                                         resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
 668                                         reset-names = "phy", "por";
 669                                         status = "disabled";
 670                                 };
 671                         };
 672                 };
 673
 674                 rng@f9bff000 {
 675                         compatible = "qcom,prng";
 676                         reg = <0xf9bff000 0x200>;
 677                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 678                         clock-names = "core";
 679                 };
 680
 681                 msmgpio: pinctrl@fd510000 {
 682                         compatible = "qcom,msm8974-pinctrl";
 683                         reg = <0xfd510000 0x4000>;
 684                         gpio-controller;
 685                         #gpio-cells = <2>;
 686                         interrupt-controller;
 687                         #interrupt-cells = <2>;
 688                         interrupts = <0 208 0>;
 689                 };
 690
 691                 i2c@f9924000 {
 692                         status = "disabled";
 693                         compatible = "qcom,i2c-qup-v2.1.1";
 694                         reg = <0xf9924000 0x1000>;
 695                         interrupts = <0 96 IRQ_TYPE_NONE>;
 696                         clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 697                         clock-names = "core", "iface";
 698                         #address-cells = <1>;
 699                         #size-cells = <0>;
 700                 };
 701
 702                 blsp_i2c8: i2c@f9964000 {
 703                         status = "disabled";
 704                         compatible = "qcom,i2c-qup-v2.1.1";
 705                         reg = <0xf9964000 0x1000>;
 706                         interrupts = <0 102 IRQ_TYPE_NONE>;
 707                         clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 708                         clock-names = "core", "iface";
 709                         #address-cells = <1>;
 710                         #size-cells = <0>;
 711                 };
 712
 713                 blsp_i2c11: i2c@f9967000 {
 714                         status = "disabled";
 715                         compatible = "qcom,i2c-qup-v2.1.1";
 716                         reg = <0xf9967000 0x1000>;
 717                         interrupts = <0 105 IRQ_TYPE_NONE>;
 718                         clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 719                         clock-names = "core", "iface";
 720                         #address-cells = <1>;
 721                         #size-cells = <0>;
 722                         dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
 723                         dma-names = "tx", "rx";
 724                 };
 725
 726                 spmi_bus: spmi@fc4cf000 {
 727                         compatible = "qcom,spmi-pmic-arb";
 728                         reg-names = "core", "intr", "cnfg";
 729                         reg = <0xfc4cf000 0x1000>,
 730                               <0xfc4cb000 0x1000>,
 731                               <0xfc4ca000 0x1000>;
 732                         interrupt-names = "periph_irq";
 733                         interrupts = <0 190 0>;
 734                         qcom,ee = <0>;
 735                         qcom,channel = <0>;
 736                         #address-cells = <2>;
 737                         #size-cells = <0>;
 738                         interrupt-controller;
 739                         #interrupt-cells = <4>;
 740                 };
 741
 742                 blsp2_dma: dma-controller@f9944000 {
 743                         compatible = "qcom,bam-v1.4.0";
 744                         reg = <0xf9944000 0x19000>;
 745                         interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
 746                         clocks = <&gcc GCC_BLSP2_AHB_CLK>;
 747                         clock-names = "bam_clk";
 748                         #dma-cells = <1>;
 749                         qcom,ee = <0>;
 750                 };
 751
 752                 etr@fc322000 {
 753                         compatible = "arm,coresight-tmc", "arm,primecell";
 754                         reg = <0xfc322000 0x1000>;
 755
 756                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 757                         clock-names = "apb_pclk", "atclk";
 758
 759                         port {
 760                                 etr_in: endpoint {
 761                                         slave-mode;
 762                                         remote-endpoint = <&replicator_out0>;
 763                                 };
 764                         };
 765                 };
 766
 767                 tpiu@fc318000 {
 768                         compatible = "arm,coresight-tpiu", "arm,primecell";
 769                         reg = <0xfc318000 0x1000>;
 770
 771                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 772                         clock-names = "apb_pclk", "atclk";
 773
 774                         port {
 775                                 tpiu_in: endpoint {
 776                                          slave-mode;
 777                                          remote-endpoint = <&replicator_out1>;
 778                                  };
 779                         };
 780                 };
 781
 782                 replicator@fc31c000 {
 783                         compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
 784                         reg = <0xfc31c000 0x1000>;
 785
 786                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 787                         clock-names = "apb_pclk", "atclk";
 788
 789                         ports {
 790                                 #address-cells = <1>;
 791                                 #size-cells = <0>;
 792
 793                                 port@0 {
 794                                         reg = <0>;
 795                                         replicator_out0: endpoint {
 796                                                 remote-endpoint = <&etr_in>;
 797                                         };
 798                                 };
 799                                 port@1 {
 800                                         reg = <1>;
 801                                         replicator_out1: endpoint {
 802                                                 remote-endpoint = <&tpiu_in>;
 803                                         };
 804                                 };
 805                                 port@2 {
 806                                         reg = <0>;
 807                                         replicator_in: endpoint {
 808                                                 slave-mode;
 809                                                 remote-endpoint = <&etf_out>;
 810                                         };
 811                                 };
 812                         };
 813                 };
 814
 815                 etf@fc307000 {
 816                         compatible = "arm,coresight-tmc", "arm,primecell";
 817                         reg = <0xfc307000 0x1000>;
 818
 819                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 820                         clock-names = "apb_pclk", "atclk";
 821
 822                         ports {
 823                                 #address-cells = <1>;
 824                                 #size-cells = <0>;
 825
 826                                 port@0 {
 827                                         reg = <0>;
 828                                         etf_out: endpoint {
 829                                                 remote-endpoint = <&replicator_in>;
 830                                         };
 831                                 };
 832                                 port@1 {
 833                                         reg = <0>;
 834                                         etf_in: endpoint {
 835                                                 slave-mode;
 836                                                 remote-endpoint = <&merger_out>;
 837                                         };
 838                                 };
 839                         };
 840                 };
 841
 842                 funnel@fc31b000 {
 843                         compatible = "arm,coresight-funnel", "arm,primecell";
 844                         reg = <0xfc31b000 0x1000>;
 845
 846                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 847                         clock-names = "apb_pclk", "atclk";
 848
 849                         ports {
 850                                 #address-cells = <1>;
 851                                 #size-cells = <0>;
 852
 853                                 /*
 854                                  * Not described input ports:
 855                                  * 0 - connected trought funnel to Audio, Modem and
 856                                  *     Resource and Power Manager CPU's
 857                                  * 2...7 - not-connected
 858                                  */
 859                                 port@1 {
 860                                         reg = <1>;
 861                                         merger_in1: endpoint {
 862                                                 slave-mode;
 863                                                 remote-endpoint = <&funnel1_out>;
 864                                         };
 865                                 };
 866                                 port@8 {
 867                                         reg = <0>;
 868                                         merger_out: endpoint {
 869                                                 remote-endpoint = <&etf_in>;
 870                                         };
 871                                 };
 872                         };
 873                 };
 874
 875                 funnel@fc31a000 {
 876                         compatible = "arm,coresight-funnel", "arm,primecell";
 877                         reg = <0xfc31a000 0x1000>;
 878
 879                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 880                         clock-names = "apb_pclk", "atclk";
 881
 882                         ports {
 883                                 #address-cells = <1>;
 884                                 #size-cells = <0>;
 885
 886                                 /*
 887                                  * Not described input ports:
 888                                  * 0 - not-connected
 889                                  * 1 - connected trought funnel to Multimedia CPU
 890                                  * 2 - connected to Wireless CPU
 891                                  * 3 - not-connected
 892                                  * 4 - not-connected
 893                                  * 6 - not-connected
 894                                  * 7 - connected to STM
 895                                  */
 896                                 port@5 {
 897                                         reg = <5>;
 898                                         funnel1_in5: endpoint {
 899                                                 slave-mode;
 900                                                 remote-endpoint = <&kpss_out>;
 901                                         };
 902                                 };
 903                                 port@8 {
 904                                         reg = <0>;
 905                                         funnel1_out: endpoint {
 906                                                 remote-endpoint = <&merger_in1>;
 907                                         };
 908                                 };
 909                         };
 910                 };
 911
 912                 funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
 913                         compatible = "arm,coresight-funnel", "arm,primecell";
 914                         reg = <0xfc345000 0x1000>;
 915
 916                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 917                         clock-names = "apb_pclk", "atclk";
 918
 919                         ports {
 920                                 #address-cells = <1>;
 921                                 #size-cells = <0>;
 922
 923                                 port@0 {
 924                                         reg = <0>;
 925                                         kpss_in0: endpoint {
 926                                                 slave-mode;
 927                                                 remote-endpoint = <&etm0_out>;
 928                                         };
 929                                 };
 930                                 port@1 {
 931                                         reg = <1>;
 932                                         kpss_in1: endpoint {
 933                                                 slave-mode;
 934                                                 remote-endpoint = <&etm1_out>;
 935                                         };
 936                                 };
 937                                 port@2 {
 938                                         reg = <2>;
 939                                         kpss_in2: endpoint {
 940                                                 slave-mode;
 941                                                 remote-endpoint = <&etm2_out>;
 942                                         };
 943                                 };
 944                                 port@3 {
 945                                         reg = <3>;
 946                                         kpss_in3: endpoint {
 947                                                 slave-mode;
 948                                                 remote-endpoint = <&etm3_out>;
 949                                         };
 950                                 };
 951                                 port@8 {
 952                                         reg = <0>;
 953                                         kpss_out: endpoint {
 954                                                 remote-endpoint = <&funnel1_in5>;
 955                                         };
 956                                 };
 957                         };
 958                 };
 959
 960                 etm@fc33c000 {
 961                         compatible = "arm,coresight-etm4x", "arm,primecell";
 962                         reg = <0xfc33c000 0x1000>;
 963
 964                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 965                         clock-names = "apb_pclk", "atclk";
 966
 967                         cpu = <&CPU0>;
 968
 969                         port {
 970                                 etm0_out: endpoint {
 971                                         remote-endpoint = <&kpss_in0>;
 972                                 };
 973                         };
 974                 };
 975
 976                 etm@fc33d000 {
 977                         compatible = "arm,coresight-etm4x", "arm,primecell";
 978                         reg = <0xfc33d000 0x1000>;
 979
 980                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 981                         clock-names = "apb_pclk", "atclk";
 982
 983                         cpu = <&CPU1>;
 984
 985                         port {
 986                                 etm1_out: endpoint {
 987                                         remote-endpoint = <&kpss_in1>;
 988                                 };
 989                         };
 990                 };
 991
 992                 etm@fc33e000 {
 993                         compatible = "arm,coresight-etm4x", "arm,primecell";
 994                         reg = <0xfc33e000 0x1000>;
 995
 996                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 997                         clock-names = "apb_pclk", "atclk";
 998
 999                         cpu = <&CPU2>;
1000
1001                         port {
1002                                 etm2_out: endpoint {
1003                                         remote-endpoint = <&kpss_in2>;
1004                                 };
1005                         };
1006                 };
1007
1008                 etm@fc33f000 {
1009                         compatible = "arm,coresight-etm4x", "arm,primecell";
1010                         reg = <0xfc33f000 0x1000>;
1011
1012                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1013                         clock-names = "apb_pclk", "atclk";
1014
1015                         cpu = <&CPU3>;
1016
1017                         port {
1018                                 etm3_out: endpoint {
1019                                         remote-endpoint = <&kpss_in3>;
1020                                 };
1021                         };
1022                 };
1023         };
1024
1025         smd {
1026                 compatible = "qcom,smd";
1027
1028                 adsp {
1029                         interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
1030
1031                         qcom,ipc = <&apcs 8 8>;
1032                         qcom,smd-edge = <1>;
1033                 };
1034
1035                 modem {
1036                         interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
1037
1038                         qcom,ipc = <&apcs 8 12>;
1039                         qcom,smd-edge = <0>;
1040                 };
1041
1042                 rpm {
1043                         interrupts = <0 168 1>;
1044                         qcom,ipc = <&apcs 8 0>;
1045                         qcom,smd-edge = <15>;
1046
1047                         rpm_requests {
1048                                 compatible = "qcom,rpm-msm8974";
1049                                 qcom,smd-channels = "rpm_requests";
1050
1051                                 rpmcc: clock-controller {
1052                                         compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
1053                                         #clock-cells = <1>;
1054                                 };
1055
1056                                 pm8841-regulators {
1057                                         compatible = "qcom,rpm-pm8841-regulators";
1058
1059                                         pm8841_s1: s1 {};
1060                                         pm8841_s2: s2 {};
1061                                         pm8841_s3: s3 {};
1062                                         pm8841_s4: s4 {};
1063                                         pm8841_s5: s5 {};
1064                                         pm8841_s6: s6 {};
1065                                         pm8841_s7: s7 {};
1066                                         pm8841_s8: s8 {};
1067                                 };
1068
1069                                 pm8941-regulators {
1070                                         compatible = "qcom,rpm-pm8941-regulators";
1071
1072                                         pm8941_s1: s1 {};
1073                                         pm8941_s2: s2 {};
1074                                         pm8941_s3: s3 {};
1075
1076                                         pm8941_l1: l1 {};
1077                                         pm8941_l2: l2 {};
1078                                         pm8941_l3: l3 {};
1079                                         pm8941_l4: l4 {};
1080                                         pm8941_l5: l5 {};
1081                                         pm8941_l6: l6 {};
1082                                         pm8941_l7: l7 {};
1083                                         pm8941_l8: l8 {};
1084                                         pm8941_l9: l9 {};
1085                                         pm8941_l10: l10 {};
1086                                         pm8941_l11: l11 {};
1087                                         pm8941_l12: l12 {};
1088                                         pm8941_l13: l13 {};
1089                                         pm8941_l14: l14 {};
1090                                         pm8941_l15: l15 {};
1091                                         pm8941_l16: l16 {};
1092                                         pm8941_l17: l17 {};
1093                                         pm8941_l18: l18 {};
1094                                         pm8941_l19: l19 {};
1095                                         pm8941_l20: l20 {};
1096                                         pm8941_l21: l21 {};
1097                                         pm8941_l22: l22 {};
1098                                         pm8941_l23: l23 {};
1099                                         pm8941_l24: l24 {};
1100
1101                                         pm8941_lvs1: lvs1 {};
1102                                         pm8941_lvs2: lvs2 {};
1103                                         pm8941_lvs3: lvs3 {};
1104                                 };
1105                         };
1106                 };
1107         };
1108
1109         vreg_boost: vreg-boost {
1110                 compatible = "regulator-fixed";
1111
1112                 regulator-name = "vreg-boost";
1113                 regulator-min-microvolt = <3150000>;
1114                 regulator-max-microvolt = <3150000>;
1115
1116                 regulator-always-on;
1117                 regulator-boot-on;
1118
1119                 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
1120                 enable-active-high;
1121
1122                 pinctrl-names = "default";
1123                 pinctrl-0 = <&boost_bypass_n_pin>;
1124         };
1125         vreg_vph_pwr: vreg-vph-pwr {
1126                 compatible = "regulator-fixed";
1127                 regulator-name = "vph-pwr";
1128
1129                 regulator-min-microvolt = <3600000>;
1130                 regulator-max-microvolt = <3600000>;
1131
1132                 regulator-always-on;
1133         };
1134 };