arch/arm/boot/dts/qcom-pma8084.dtsi

   1 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   2 #include <dt-bindings/interrupt-controller/irq.h>
   3 #include <dt-bindings/spmi/spmi.h>
   4
   5 &spmi_bus {
   6
   7         pma8084_0: pma8084@0 {
   8                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
   9                 reg = <0x0 SPMI_USID>;
  10                 #address-cells = <1>;
  11                 #size-cells = <0>;
  12
  13                 rtc@6000 {
  14                         compatible = "qcom,pm8941-rtc";
  15                         reg = <0x6000>,
  16                               <0x6100>;
  17                         reg-names = "rtc", "alarm";
  18                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  19                 };
  20
  21                 pwrkey@800 {
  22                         compatible = "qcom,pm8941-pwrkey";
  23                         reg = <0x800>;
  24                         interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  25                         debounce = <15625>;
  26                         bias-pull-up;
  27                 };
  28
  29                 pma8084_gpios: gpios@c000 {
  30                         compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
  31                         reg = <0xc000>;
  32                         gpio-controller;
  33                         #gpio-cells = <2>;
  34                         interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
  35                                      <0 0xc1 0 IRQ_TYPE_NONE>,
  36                                      <0 0xc2 0 IRQ_TYPE_NONE>,
  37                                      <0 0xc3 0 IRQ_TYPE_NONE>,
  38                                      <0 0xc4 0 IRQ_TYPE_NONE>,
  39                                      <0 0xc5 0 IRQ_TYPE_NONE>,
  40                                      <0 0xc6 0 IRQ_TYPE_NONE>,
  41                                      <0 0xc7 0 IRQ_TYPE_NONE>,
  42                                      <0 0xc8 0 IRQ_TYPE_NONE>,
  43                                      <0 0xc9 0 IRQ_TYPE_NONE>,
  44                                      <0 0xca 0 IRQ_TYPE_NONE>,
  45                                      <0 0xcb 0 IRQ_TYPE_NONE>,
  46                                      <0 0xcc 0 IRQ_TYPE_NONE>,
  47                                      <0 0xcd 0 IRQ_TYPE_NONE>,
  48                                      <0 0xce 0 IRQ_TYPE_NONE>,
  49                                      <0 0xcf 0 IRQ_TYPE_NONE>,
  50                                      <0 0xd0 0 IRQ_TYPE_NONE>,
  51                                      <0 0xd1 0 IRQ_TYPE_NONE>,
  52                                      <0 0xd2 0 IRQ_TYPE_NONE>,
  53                                      <0 0xd3 0 IRQ_TYPE_NONE>,
  54                                      <0 0xd4 0 IRQ_TYPE_NONE>,
  55                                      <0 0xd5 0 IRQ_TYPE_NONE>;
  56                 };
  57
  58                 pma8084_mpps: mpps@a000 {
  59                         compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
  60                         reg = <0xa000>;
  61                         gpio-controller;
  62                         #gpio-cells = <2>;
  63                         interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
  64                                      <0 0xa1 0 IRQ_TYPE_NONE>,
  65                                      <0 0xa2 0 IRQ_TYPE_NONE>,
  66                                      <0 0xa3 0 IRQ_TYPE_NONE>,
  67                                      <0 0xa4 0 IRQ_TYPE_NONE>,
  68                                      <0 0xa5 0 IRQ_TYPE_NONE>,
  69                                      <0 0xa6 0 IRQ_TYPE_NONE>,
  70                                      <0 0xa7 0 IRQ_TYPE_NONE>;
  71                 };
  72
  73                 pma8084_temp: temp-alarm@2400 {
  74                         compatible = "qcom,spmi-temp-alarm";
  75                         reg = <0x2400>;
  76                         interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
  77                         #thermal-sensor-cells = <0>;
  78                         io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
  79                         io-channel-names = "thermal";
  80                 };
  81
  82                 pma8084_vadc: vadc@3100 {
  83                         compatible = "qcom,spmi-vadc";
  84                         reg = <0x3100>;
  85                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  86                         #address-cells = <1>;
  87                         #size-cells = <0>;
  88                         #io-channel-cells = <1>;
  89                         io-channel-ranges;
  90
  91                         die_temp {
  92                                 reg = <VADC_DIE_TEMP>;
  93                         };
  94                         ref_625mv {
  95                                 reg = <VADC_REF_625MV>;
  96                         };
  97                         ref_1250v {
  98                                 reg = <VADC_REF_1250MV>;
  99                         };
 100                         ref_buf_625mv {
 101                                 reg = <VADC_SPARE1>;
 102                         };
 103                         ref_gnd {
 104                                 reg = <VADC_GND_REF>;
 105                         };
 106                         ref_vdd {
 107                                 reg = <VADC_VDD_VADC>;
 108                         };
 109                 };
 110         };
 111
 112         pma8084_1: pma8084@1 {
 113                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
 114                 reg = <0x1 SPMI_USID>;
 115                 #address-cells = <1>;
 116                 #size-cells = <0>;
 117         };
 118 };