arch/arm/boot/dts/qcom-pma8084.dtsi

   1 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   2 #include <dt-bindings/interrupt-controller/irq.h>
   3 #include <dt-bindings/spmi/spmi.h>
   4
   5 &spmi_bus {
   6
   7         pma8084_0: pma8084@0 {
   8                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
   9                 reg = <0x0 SPMI_USID>;
  10                 #address-cells = <1>;
  11                 #size-cells = <0>;
  12
  13                 rtc@6000 {
  14                         compatible = "qcom,pm8941-rtc";
  15                         reg = <0x6000 0x100>,
  16                               <0x6100 0x100>;
  17                         reg-names = "rtc", "alarm";
  18                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
  19                 };
  20
  21                 pma8084_gpios: gpios@c000 {
  22                         compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
  23                         reg = <0xc000 0x1600>;
  24                         gpio-controller;
  25                         #gpio-cells = <2>;
  26                         interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
  27                                      <0 0xc1 0 IRQ_TYPE_NONE>,
  28                                      <0 0xc2 0 IRQ_TYPE_NONE>,
  29                                      <0 0xc3 0 IRQ_TYPE_NONE>,
  30                                      <0 0xc4 0 IRQ_TYPE_NONE>,
  31                                      <0 0xc5 0 IRQ_TYPE_NONE>,
  32                                      <0 0xc6 0 IRQ_TYPE_NONE>,
  33                                      <0 0xc7 0 IRQ_TYPE_NONE>,
  34                                      <0 0xc8 0 IRQ_TYPE_NONE>,
  35                                      <0 0xc9 0 IRQ_TYPE_NONE>,
  36                                      <0 0xca 0 IRQ_TYPE_NONE>,
  37                                      <0 0xcb 0 IRQ_TYPE_NONE>,
  38                                      <0 0xcc 0 IRQ_TYPE_NONE>,
  39                                      <0 0xcd 0 IRQ_TYPE_NONE>,
  40                                      <0 0xce 0 IRQ_TYPE_NONE>,
  41                                      <0 0xcf 0 IRQ_TYPE_NONE>,
  42                                      <0 0xd0 0 IRQ_TYPE_NONE>,
  43                                      <0 0xd1 0 IRQ_TYPE_NONE>,
  44                                      <0 0xd2 0 IRQ_TYPE_NONE>,
  45                                      <0 0xd3 0 IRQ_TYPE_NONE>,
  46                                      <0 0xd4 0 IRQ_TYPE_NONE>,
  47                                      <0 0xd5 0 IRQ_TYPE_NONE>;
  48                 };
  49
  50                 pma8084_mpps: mpps@a000 {
  51                         compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
  52                         reg = <0xa000 0x800>;
  53                         gpio-controller;
  54                         #gpio-cells = <2>;
  55                         interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
  56                                      <0 0xa1 0 IRQ_TYPE_NONE>,
  57                                      <0 0xa2 0 IRQ_TYPE_NONE>,
  58                                      <0 0xa3 0 IRQ_TYPE_NONE>,
  59                                      <0 0xa4 0 IRQ_TYPE_NONE>,
  60                                      <0 0xa5 0 IRQ_TYPE_NONE>,
  61                                      <0 0xa6 0 IRQ_TYPE_NONE>,
  62                                      <0 0xa7 0 IRQ_TYPE_NONE>;
  63                 };
  64
  65                 pma8084_temp: temp-alarm@2400 {
  66                         compatible = "qcom,spmi-temp-alarm";
  67                         reg = <0x2400 0x100>;
  68                         interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
  69                         #thermal-sensor-cells = <0>;
  70                         io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
  71                         io-channel-names = "thermal";
  72                 };
  73
  74                 pma8084_vadc: vadc@3100 {
  75                         compatible = "qcom,spmi-vadc";
  76                         reg = <0x3100 0x100>;
  77                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  78                         #address-cells = <1>;
  79                         #size-cells = <0>;
  80                         #io-channel-cells = <1>;
  81                         io-channel-ranges;
  82
  83                         die_temp {
  84                                 reg = <VADC_DIE_TEMP>;
  85                         };
  86                         ref_625mv {
  87                                 reg = <VADC_REF_625MV>;
  88                         };
  89                         ref_1250v {
  90                                 reg = <VADC_REF_1250MV>;
  91                         };
  92                         ref_buf_625mv {
  93                                 reg = <VADC_SPARE1>;
  94                         };
  95                         ref_gnd {
  96                                 reg = <VADC_GND_REF>;
  97                         };
  98                         ref_vdd {
  99                                 reg = <VADC_VDD_VADC>;
 100                         };
 101                 };
 102         };
 103
 104         pma8084_1: pma8084@1 {
 105                 compatible = "qcom,pma8084", "qcom,spmi-pmic";
 106                 reg = <0x1 SPMI_USID>;
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109         };
 110 };