arch/arm/boot/dts/r8a7779-marzen.dts

   1 /*
   2  * Device Tree Source for the Marzen board
   3  *
   4  * Copyright (C) 2013 Renesas Solutions Corp.
   5  * Copyright (C) 2013 Simon Horman
   6  *
   7  * This file is licensed under the terms of the GNU General Public License
   8  * version 2.  This program is licensed "as is" without any warranty of any
   9  * kind, whether express or implied.
  10  */
  11
  12 /dts-v1/;
  13 #include "r8a7779.dtsi"
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16
  17 / {
  18         model = "marzen";
  19         compatible = "renesas,marzen", "renesas,r8a7779";
  20
  21         aliases {
  22                 serial0 = &scif2;
  23                 serial1 = &scif4;
  24         };
  25
  26         chosen {
  27                 bootargs = "ignore_loglevel root=/dev/nfs ip=on";
  28                 stdout-path = &scif2;
  29         };
  30
  31         memory {
  32                 device_type = "memory";
  33                 reg = <0x60000000 0x40000000>;
  34         };
  35
  36         fixedregulator3v3: fixedregulator@0 {
  37                 compatible = "regulator-fixed";
  38                 regulator-name = "fixed-3.3V";
  39                 regulator-min-microvolt = <3300000>;
  40                 regulator-max-microvolt = <3300000>;
  41                 regulator-boot-on;
  42                 regulator-always-on;
  43         };
  44
  45         ethernet@18000000 {
  46                 compatible = "smsc,lan9220", "smsc,lan9115";
  47                 reg = <0x18000000 0x100>;
  48                 pinctrl-0 = <&ethernet_pins>;
  49                 pinctrl-names = "default";
  50
  51                 phy-mode = "mii";
  52                 interrupt-parent = <&irqpin0>;
  53                 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
  54                 smsc,irq-push-pull;
  55                 reg-io-width = <4>;
  56                 vddvario-supply = <&fixedregulator3v3>;
  57                 vdd33a-supply = <&fixedregulator3v3>;
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62                 led2 {
  63                         gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
  64                 };
  65                 led3 {
  66                         gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
  67                 };
  68                 led4 {
  69                         gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
  70                 };
  71         };
  72
  73         vga-encoder {
  74                 compatible = "adi,adv7123";
  75
  76                 ports {
  77                         #address-cells = <1>;
  78                         #size-cells = <0>;
  79
  80                         port@0 {
  81                                 reg = <0>;
  82                                 vga_enc_in: endpoint {
  83                                         remote-endpoint = <&du_out_rgb0>;
  84                                 };
  85                         };
  86                         port@1 {
  87                                 reg = <1>;
  88                                 vga_enc_out: endpoint {
  89                                         remote-endpoint = <&vga_in>;
  90                                 };
  91                         };
  92                 };
  93         };
  94
  95         vga {
  96                 compatible = "vga-connector";
  97
  98                 port {
  99                         vga_in: endpoint {
 100                                 remote-endpoint = <&vga_enc_out>;
 101                         };
 102                 };
 103         };
 104
 105         lvds-encoder {
 106                 compatible = "thine,thc63lvdm83d";
 107
 108                 ports {
 109                         #address-cells = <1>;
 110                         #size-cells = <0>;
 111
 112                         port@0 {
 113                                 reg = <0>;
 114                                 lvds_enc_in: endpoint {
 115                                         remote-endpoint = <&du_out_rgb1>;
 116                                 };
 117                         };
 118                         port@1 {
 119                                 reg = <1>;
 120                                 lvds_connector: endpoint {
 121                                 };
 122                         };
 123                 };
 124         };
 125
 126         x3_clk: x3-clock {
 127                 compatible = "fixed-clock";
 128                 #clock-cells = <0>;
 129                 clock-frequency = <65000000>;
 130         };
 131 };
 132
 133 &du {
 134         pinctrl-0 = <&du_pins>;
 135         pinctrl-names = "default";
 136         status = "okay";
 137
 138         clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
 139         clock-names = "du", "dclkin.0";
 140
 141         ports {
 142                 port@0 {
 143                         endpoint {
 144                                 remote-endpoint = <&vga_enc_in>;
 145                         };
 146                 };
 147                 port@1 {
 148                         endpoint {
 149                                 remote-endpoint = <&lvds_enc_in>;
 150                         };
 151                 };
 152         };
 153 };
 154
 155 &irqpin0 {
 156         status = "okay";
 157 };
 158
 159 &extal_clk {
 160         clock-frequency = <31250000>;
 161 };
 162
 163 &tmu0 {
 164         status = "okay";
 165 };
 166
 167 &pfc {
 168         pinctrl-0 = <&scif_clk_pins>;
 169         pinctrl-names = "default";
 170
 171         du_pins: du {
 172                 du0 {
 173                         groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
 174                         function = "du0";
 175                 };
 176                 du1 {
 177                         groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
 178                         function = "du1";
 179                 };
 180         };
 181
 182         scif_clk_pins: scif_clk {
 183                 groups = "scif_clk_b";
 184                 function = "scif_clk";
 185         };
 186
 187         ethernet_pins: ethernet {
 188                 intc {
 189                         groups = "intc_irq1_b";
 190                         function = "intc";
 191                 };
 192                 lbsc {
 193                         groups = "lbsc_ex_cs0";
 194                         function = "lbsc";
 195                 };
 196         };
 197
 198         scif2_pins: serial2 {
 199                 groups = "scif2_data_c";
 200                 function = "scif2";
 201         };
 202
 203         scif4_pins: serial4 {
 204                 groups = "scif4_data";
 205                 function = "scif4";
 206         };
 207
 208         sdhi0_pins: sd0 {
 209                 groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
 210                 function = "sdhi0";
 211         };
 212
 213         hspi0_pins: hspi0 {
 214                 groups = "hspi0";
 215                 function = "hspi0";
 216         };
 217 };
 218
 219 &scif2 {
 220         pinctrl-0 = <&scif2_pins>;
 221         pinctrl-names = "default";
 222
 223         status = "okay";
 224 };
 225
 226 &scif4 {
 227         pinctrl-0 = <&scif4_pins>;
 228         pinctrl-names = "default";
 229
 230         status = "okay";
 231 };
 232
 233 &scif_clk {
 234         clock-frequency = <14745600>;
 235         status = "okay";
 236 };
 237
 238 &sdhi0 {
 239         pinctrl-0 = <&sdhi0_pins>;
 240         pinctrl-names = "default";
 241
 242         vmmc-supply = <&fixedregulator3v3>;
 243         bus-width = <4>;
 244         status = "okay";
 245 };
 246
 247 &hspi0 {
 248         pinctrl-0 = <&hspi0_pins>;
 249         pinctrl-names = "default";
 250         status = "okay";
 251 };