2 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
48 #include "socfpga_cyclone5.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/input/input.h>
53 model = "samtec VIN|ING FPGA";
54 compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
57 bootargs = "earlyprintk";
58 stdout-path = "serial0:115200n8";
63 device_type = "memory";
64 reg = <0x0 0x40000000>; /* 1GB */
69 * This allow the ethaddr uboot environment variable contents
70 * to be added to the gmac1 device tree blob.
77 compatible = "gpio-keys";
80 label = "BTN_0"; /* TEMP_OS */
81 gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPIO60 */
86 label = "BTN_1"; /* DIS_PWR */
87 gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPIO61 */
92 label = "hps_hkey1"; /* POWER_DOWN */
93 gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */
94 linux,code = <KEY_POWER>;
99 compatible = "regulator-fixed";
100 regulator-name = "usb_nrst";
101 regulator-min-microvolt = <5000000>;
102 regulator-max-microvolt = <5000000>;
103 gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
104 startup-delay-us = <70000>;
113 phy-handle = <&phy1>;
115 snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
116 snps,reset-active-low;
117 snps,reset-delays-us = <10000 10000 10000>;
120 #address-cells = <1>;
122 compatible = "snps,dwmac-mdio";
123 phy1: ethernet-phy@1 {
130 txc-skew-ps = <2600>;
132 rxc-skew-ps = <2000>;
137 &gpio0 { /* GPIO 0..29 */
141 &gpio1 { /* GPIO 30..57 */
145 &gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
153 compatible = "nxp,pca9557";
165 compatible = "atmel,24c01";
171 compatible = "nxp,pca9548";
172 #address-cells = <1>;
177 #address-cells = <1>;
183 #address-cells = <1>;
189 #address-cells = <1>;
195 #address-cells = <1>;
201 #address-cells = <1>;
207 #address-cells = <1>;
212 i2c@6 { /* Backplane EEPROM */
213 #address-cells = <1>;
217 compatible = "atmel,24c01";
223 i2c@7 { /* Power board EEPROM */
224 #address-cells = <1>;
228 compatible = "atmel,24c01";
238 clock-frequency = <100000>;
241 compatible = "atmel,24c02";
251 #address-cells = <1>;
253 compatible = "n25q128";
254 reg = <0>; /* chip select */
255 spi-max-frequency = <100000000>;
258 cdns,page-size = <256>;
259 cdns,block-size = <16>;
260 cdns,read-delay = <4>;
261 cdns,tshsl-ns = <50>;
262 cdns,tsd2d-ns = <50>;
268 #address-cells = <1>;
270 compatible = "n25q00";
271 reg = <1>; /* chip select */
272 spi-max-frequency = <100000000>;
275 cdns,page-size = <256>;
276 cdns,block-size = <16>;
277 cdns,read-delay = <4>;
278 cdns,tshsl-ns = <50>;
279 cdns,tsd2d-ns = <50>;
291 dr_mode = "peripheral";