arch/arm/boot/dts/spear1310.dtsi

   1 /*
   2  * DTS file for all SPEAr1310 SoCs
   3  *
   4  * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 /include/ "spear13xx.dtsi"
  15
  16 / {
  17         compatible = "st,spear1310";
  18
  19         ahb {
  20                 spics: spics@e0700000{
  21                         compatible = "st,spear-spics-gpio";
  22                         reg = <0xe0700000 0x1000>;
  23                         st-spics,peripcfg-reg = <0x3b0>;
  24                         st-spics,sw-enable-bit = <12>;
  25                         st-spics,cs-value-bit = <11>;
  26                         st-spics,cs-enable-mask = <3>;
  27                         st-spics,cs-enable-shift = <8>;
  28                         gpio-controller;
  29                         #gpio-cells = <2>;
  30                 };
  31
  32                 miphy0: miphy@eb800000 {
  33                         compatible = "st,spear1310-miphy";
  34                         reg = <0xeb800000 0x4000>;
  35                         misc = <&misc>;
  36                         phy-id = <0>;
  37                         #phy-cells = <1>;
  38                         status = "disabled";
  39                 };
  40
  41                 miphy1: miphy@eb804000 {
  42                         compatible = "st,spear1310-miphy";
  43                         reg = <0xeb804000 0x4000>;
  44                         misc = <&misc>;
  45                         phy-id = <1>;
  46                         #phy-cells = <1>;
  47                         status = "disabled";
  48                 };
  49
  50                 miphy2: miphy@eb808000 {
  51                         compatible = "st,spear1310-miphy";
  52                         reg = <0xeb808000 0x4000>;
  53                         misc = <&misc>;
  54                         phy-id = <2>;
  55                         #phy-cells = <1>;
  56                         status = "disabled";
  57                 };
  58
  59                 ahci0: ahci@b1000000 {
  60                         compatible = "snps,spear-ahci";
  61                         reg = <0xb1000000 0x10000>;
  62                         interrupts = <0 68 0x4>;
  63                         phys = <&miphy0 0>;
  64                         phy-names = "sata-phy";
  65                         status = "disabled";
  66                 };
  67
  68                 ahci1: ahci@b1800000 {
  69                         compatible = "snps,spear-ahci";
  70                         reg = <0xb1800000 0x10000>;
  71                         interrupts = <0 69 0x4>;
  72                         phys = <&miphy1 0>;
  73                         phy-names = "sata-phy";
  74                         status = "disabled";
  75                 };
  76
  77                 ahci2: ahci@b4000000 {
  78                         compatible = "snps,spear-ahci";
  79                         reg = <0xb4000000 0x10000>;
  80                         interrupts = <0 70 0x4>;
  81                         phys = <&miphy2 0>;
  82                         phy-names = "sata-phy";
  83                         status = "disabled";
  84                 };
  85
  86                 pcie0: pcie@b1000000 {
  87                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
  88                         reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
  89                         reg-names = "dbi", "config";
  90                         interrupts = <0 68 0x4>;
  91                         interrupt-map-mask = <0 0 0 0>;
  92                         interrupt-map = <0x0 0 &gic 0 68 0x4>;
  93                         num-lanes = <1>;
  94                         phys = <&miphy0 1>;
  95                         phy-names = "pcie-phy";
  96                         #address-cells = <3>;
  97                         #size-cells = <2>;
  98                         device_type = "pci";
  99                         ranges = <0x81000000 0 0         0x80020000 0 0x00010000   /* downstream I/O */
 100                                 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
 101                         bus-range = <0x00 0xff>;
 102                         status = "disabled";
 103                 };
 104
 105                 pcie1: pcie@b1800000 {
 106                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
 107                         reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
 108                         reg-names = "dbi", "config";
 109                         interrupts = <0 69 0x4>;
 110                         interrupt-map-mask = <0 0 0 0>;
 111                         interrupt-map = <0x0 0 &gic 0 69 0x4>;
 112                         num-lanes = <1>;
 113                         phys = <&miphy1 1>;
 114                         phy-names = "pcie-phy";
 115                         #address-cells = <3>;
 116                         #size-cells = <2>;
 117                         device_type = "pci";
 118                         ranges = <0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
 119                                 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
 120                         bus-range = <0x00 0xff>;
 121                         status = "disabled";
 122                 };
 123
 124                 pcie2: pcie@b4000000 {
 125                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
 126                         reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
 127                         reg-names = "dbi", "config";
 128                         interrupts = <0 70 0x4>;
 129                         interrupt-map-mask = <0 0 0 0>;
 130                         interrupt-map = <0x0 0 &gic 0 70 0x4>;
 131                         num-lanes = <1>;
 132                         phys = <&miphy2 1>;
 133                         phy-names = "pcie-phy";
 134                         #address-cells = <3>;
 135                         #size-cells = <2>;
 136                         device_type = "pci";
 137                         ranges = <0x81000000 0 0         0xc0020000 0 0x00010000   /* downstream I/O */
 138                                 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
 139                         bus-range = <0x00 0xff>;
 140                         status = "disabled";
 141                 };
 142
 143                 gmac1: eth@5c400000 {
 144                         compatible = "st,spear600-gmac";
 145                         reg = <0x5c400000 0x8000>;
 146                         interrupts = <0 95 0x4>;
 147                         interrupt-names = "macirq";
 148                         phy-mode = "mii";
 149                         status = "disabled";
 150                 };
 151
 152                 gmac2: eth@5c500000 {
 153                         compatible = "st,spear600-gmac";
 154                         reg = <0x5c500000 0x8000>;
 155                         interrupts = <0 96 0x4>;
 156                         interrupt-names = "macirq";
 157                         phy-mode = "mii";
 158                         status = "disabled";
 159                 };
 160
 161                 gmac3: eth@5c600000 {
 162                         compatible = "st,spear600-gmac";
 163                         reg = <0x5c600000 0x8000>;
 164                         interrupts = <0 97 0x4>;
 165                         interrupt-names = "macirq";
 166                         phy-mode = "rmii";
 167                         status = "disabled";
 168                 };
 169
 170                 gmac4: eth@5c700000 {
 171                         compatible = "st,spear600-gmac";
 172                         reg = <0x5c700000 0x8000>;
 173                         interrupts = <0 98 0x4>;
 174                         interrupt-names = "macirq";
 175                         phy-mode = "rgmii";
 176                         status = "disabled";
 177                 };
 178
 179                 pinmux: pinmux@e0700000 {
 180                         compatible = "st,spear1310-pinmux";
 181                         reg = <0xe0700000 0x1000>;
 182                         #gpio-range-cells = <3>;
 183                 };
 184
 185                 apb {
 186                         i2c1: i2c@5cd00000 {
 187                                 #address-cells = <1>;
 188                                 #size-cells = <0>;
 189                                 compatible = "snps,designware-i2c";
 190                                 reg = <0x5cd00000 0x1000>;
 191                                 interrupts = <0 87 0x4>;
 192                                 status = "disabled";
 193                         };
 194
 195                         i2c2: i2c@5ce00000 {
 196                                 #address-cells = <1>;
 197                                 #size-cells = <0>;
 198                                 compatible = "snps,designware-i2c";
 199                                 reg = <0x5ce00000 0x1000>;
 200                                 interrupts = <0 88 0x4>;
 201                                 status = "disabled";
 202                         };
 203
 204                         i2c3: i2c@5cf00000 {
 205                                 #address-cells = <1>;
 206                                 #size-cells = <0>;
 207                                 compatible = "snps,designware-i2c";
 208                                 reg = <0x5cf00000 0x1000>;
 209                                 interrupts = <0 89 0x4>;
 210                                 status = "disabled";
 211                         };
 212
 213                         i2c4: i2c@5d000000 {
 214                                 #address-cells = <1>;
 215                                 #size-cells = <0>;
 216                                 compatible = "snps,designware-i2c";
 217                                 reg = <0x5d000000 0x1000>;
 218                                 interrupts = <0 90 0x4>;
 219                                 status = "disabled";
 220                         };
 221
 222                         i2c5: i2c@5d100000 {
 223                                 #address-cells = <1>;
 224                                 #size-cells = <0>;
 225                                 compatible = "snps,designware-i2c";
 226                                 reg = <0x5d100000 0x1000>;
 227                                 interrupts = <0 91 0x4>;
 228                                 status = "disabled";
 229                         };
 230
 231                         i2c6: i2c@5d200000 {
 232                                 #address-cells = <1>;
 233                                 #size-cells = <0>;
 234                                 compatible = "snps,designware-i2c";
 235                                 reg = <0x5d200000 0x1000>;
 236                                 interrupts = <0 92 0x4>;
 237                                 status = "disabled";
 238                         };
 239
 240                         i2c7: i2c@5d300000 {
 241                                 #address-cells = <1>;
 242                                 #size-cells = <0>;
 243                                 compatible = "snps,designware-i2c";
 244                                 reg = <0x5d300000 0x1000>;
 245                                 interrupts = <0 93 0x4>;
 246                                 status = "disabled";
 247                         };
 248
 249                         spi1: spi@5d400000 {
 250                                 compatible = "arm,pl022", "arm,primecell";
 251                                 reg = <0x5d400000 0x1000>;
 252                                 interrupts = <0 99 0x4>;
 253                                 #address-cells = <1>;
 254                                 #size-cells = <0>;
 255                                 status = "disabled";
 256                         };
 257
 258                         serial@5c800000 {
 259                                 compatible = "arm,pl011", "arm,primecell";
 260                                 reg = <0x5c800000 0x1000>;
 261                                 interrupts = <0 82 0x4>;
 262                                 status = "disabled";
 263                         };
 264
 265                         serial@5c900000 {
 266                                 compatible = "arm,pl011", "arm,primecell";
 267                                 reg = <0x5c900000 0x1000>;
 268                                 interrupts = <0 83 0x4>;
 269                                 status = "disabled";
 270                         };
 271
 272                         serial@5ca00000 {
 273                                 compatible = "arm,pl011", "arm,primecell";
 274                                 reg = <0x5ca00000 0x1000>;
 275                                 interrupts = <0 84 0x4>;
 276                                 status = "disabled";
 277                         };
 278
 279                         serial@5cb00000 {
 280                                 compatible = "arm,pl011", "arm,primecell";
 281                                 reg = <0x5cb00000 0x1000>;
 282                                 interrupts = <0 85 0x4>;
 283                                 status = "disabled";
 284                         };
 285
 286                         serial@5cc00000 {
 287                                 compatible = "arm,pl011", "arm,primecell";
 288                                 reg = <0x5cc00000 0x1000>;
 289                                 interrupts = <0 86 0x4>;
 290                                 status = "disabled";
 291                         };
 292
 293                         thermal@e07008c4 {
 294                                 st,thermal-flags = <0x7000>;
 295                         };
 296
 297                         gpiopinctrl: gpio@d8400000 {
 298                                 compatible = "st,spear-plgpio";
 299                                 reg = <0xd8400000 0x1000>;
 300                                 interrupts = <0 100 0x4>;
 301                                 #interrupt-cells = <1>;
 302                                 interrupt-controller;
 303                                 gpio-controller;
 304                                 #gpio-cells = <2>;
 305                                 gpio-ranges = <&pinmux 0 0 246>;
 306                                 status = "disabled";
 307
 308                                 st-plgpio,ngpio = <246>;
 309                                 st-plgpio,enb-reg = <0xd0>;
 310                                 st-plgpio,wdata-reg = <0x90>;
 311                                 st-plgpio,dir-reg = <0xb0>;
 312                                 st-plgpio,ie-reg = <0x30>;
 313                                 st-plgpio,rdata-reg = <0x70>;
 314                                 st-plgpio,mis-reg = <0x10>;
 315                                 st-plgpio,eit-reg = <0x50>;
 316                         };
 317                 };
 318         };
 319 };