]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/blob - arch/arm/boot/dts/spear320-evb.dts
BCM270X: Enable the DSI panel node in the VC4 overlay.
[mirror_ubuntu-zesty-kernel.git] / arch / arm / boot / dts / spear320-evb.dts
1 /*
2 * DTS file for SPEAr320 Evaluation Baord
3 *
4 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
5 *
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13
14 /dts-v1/;
15 /include/ "spear320.dtsi"
16
17 / {
18 model = "ST SPEAr320 Evaluation Board";
19 compatible = "st,spear320-evb", "st,spear320";
20 #address-cells = <1>;
21 #size-cells = <1>;
22
23 memory {
24 reg = <0 0x40000000>;
25 };
26
27 ahb {
28 pinmux@b3000000 {
29 st,pinmux-mode = <4>;
30 pinctrl-names = "default";
31 pinctrl-0 = <&state_default>;
32
33 state_default: pinmux {
34 i2c0 {
35 st,pins = "i2c0_grp";
36 st,function = "i2c0";
37 };
38 mii0 {
39 st,pins = "mii0_grp";
40 st,function = "mii0";
41 };
42 ssp0 {
43 st,pins = "ssp0_grp";
44 st,function = "ssp0";
45 };
46 uart0 {
47 st,pins = "uart0_grp";
48 st,function = "uart0";
49 };
50 sdhci {
51 st,pins = "sdhci_cd_51_grp";
52 st,function = "sdhci";
53 };
54 i2s {
55 st,pins = "i2s_grp";
56 st,function = "i2s";
57 };
58 uart1 {
59 st,pins = "uart1_grp";
60 st,function = "uart1";
61 };
62 uart2 {
63 st,pins = "uart2_grp";
64 st,function = "uart2";
65 };
66 can0 {
67 st,pins = "can0_grp";
68 st,function = "can0";
69 };
70 can1 {
71 st,pins = "can1_grp";
72 st,function = "can1";
73 };
74 mii2 {
75 st,pins = "mii2_grp";
76 st,function = "mii2";
77 };
78 pwm0_1 {
79 st,pins = "pwm0_1_pin_37_38_grp";
80 st,function = "pwm0_1";
81 };
82 };
83 };
84
85 dma@fc400000 {
86 status = "okay";
87 };
88
89 fsmc: flash@4c000000 {
90 status = "okay";
91 };
92
93 gmac: eth@e0800000 {
94 status = "okay";
95 };
96
97 sdhci@70000000 {
98 power-gpio = <&gpiopinctrl 61 1>;
99 status = "okay";
100 };
101
102 smi: flash@fc000000 {
103 status = "okay";
104 clock-rate=<50000000>;
105
106 flash@f8000000 {
107 #address-cells = <1>;
108 #size-cells = <1>;
109 reg = <0xf8000000 0x800000>;
110 st,smi-fast-mode;
111
112 partition@0 {
113 label = "xloader";
114 reg = <0x0 0x10000>;
115 };
116 partition@10000 {
117 label = "u-boot";
118 reg = <0x10000 0x50000>;
119 };
120 partition@60000 {
121 label = "environment";
122 reg = <0x60000 0x10000>;
123 };
124 partition@70000 {
125 label = "dtb";
126 reg = <0x70000 0x10000>;
127 };
128 partition@80000 {
129 label = "linux";
130 reg = <0x80000 0x310000>;
131 };
132 partition@390000 {
133 label = "rootfs";
134 reg = <0x390000 0x0>;
135 };
136 };
137 };
138
139 spi0: spi@d0100000 {
140 status = "okay";
141 };
142
143 spi1: spi@a5000000 {
144 status = "okay";
145 };
146
147 spi2: spi@a6000000 {
148 status = "okay";
149 };
150
151 ehci@e1800000 {
152 status = "okay";
153 };
154
155 ohci@e1900000 {
156 status = "okay";
157 };
158
159 ohci@e2100000 {
160 status = "okay";
161 };
162
163 apb {
164 gpio0: gpio@fc980000 {
165 status = "okay";
166 };
167
168 gpio@b3000000 {
169 status = "okay";
170 };
171
172 i2c0: i2c@d0180000 {
173 status = "okay";
174 };
175
176 i2c1: i2c@a7000000 {
177 status = "okay";
178 };
179
180 rtc@fc900000 {
181 status = "okay";
182 };
183
184 serial@d0000000 {
185 status = "okay";
186 pinctrl-names = "default";
187 pinctrl-0 = <>;
188 };
189
190 serial@a3000000 {
191 status = "okay";
192 pinctrl-names = "default";
193 pinctrl-0 = <>;
194 };
195
196 serial@a4000000 {
197 status = "okay";
198 pinctrl-names = "default";
199 pinctrl-0 = <>;
200 };
201
202 wdt@fc880000 {
203 status = "okay";
204 };
205 };
206 };
207 };