arch/arm/boot/dts/ste-href-family-pinctrl.dtsi

   1 /*
   2  * Copyright 2013 Linaro Ltd.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "ste-nomadik-pinctrl.dtsi"
  13
  14 / {
  15         soc {
  16                 pinctrl {
  17                         /* Settings for all UART default and sleep states */
  18                         uart0 {
  19                                 uart0_default_mode: uart0_default {
  20                                         default_mux {
  21                                                 function = "u0";
  22                                                 groups = "u0_a_1";
  23                                         };
  24                                         default_cfg1 {
  25                                                 pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
  26                                                 ste,config = <&in_pu>;
  27                                         };
  28
  29                                         default_cfg2 {
  30                                                 pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
  31                                                 ste,config = <&out_hi>;
  32                                         };
  33                                 };
  34
  35                                 uart0_sleep_mode: uart0_sleep {
  36                                         sleep_cfg1 {
  37                                                 pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
  38                                                 ste,config = <&slpm_in_wkup_pdis>;
  39                                         };
  40
  41                                         sleep_cfg2 {
  42                                                 pins = "GPIO1_AJ3"; /* RTS */
  43                                                 ste,config = <&slpm_out_hi_wkup_pdis>;
  44                                         };
  45
  46                                         sleep_cfg3 {
  47                                                 pins = "GPIO3_AH3"; /* TXD */
  48                                                 ste,config = <&slpm_out_wkup_pdis>;
  49                                         };
  50                                 };
  51                         };
  52
  53                         uart1 {
  54                                 uart1_default_mode: uart1_default {
  55                                         default_mux {
  56                                                 function = "u1";
  57                                                 groups = "u1rxtx_a_1";
  58                                         };
  59                                         default_cfg1 {
  60                                                 pins = "GPIO4_AH6"; /* RXD */
  61                                                 ste,config = <&in_pu>;
  62                                         };
  63
  64                                         default_cfg2 {
  65                                                 pins = "GPIO5_AG6"; /* TXD */
  66                                                 ste,config = <&out_hi>;
  67                                         };
  68                                 };
  69
  70                                 uart1_sleep_mode: uart1_sleep {
  71                                         sleep_cfg1 {
  72                                                 pins = "GPIO4_AH6"; /* RXD */
  73                                                 ste,config = <&slpm_in_wkup_pdis>;
  74                                         };
  75
  76                                         sleep_cfg2 {
  77                                                 pins = "GPIO5_AG6"; /* TXD */
  78                                                 ste,config = <&slpm_out_wkup_pdis>;
  79                                         };
  80                                 };
  81                         };
  82
  83                         uart2 {
  84                                 uart2_default_mode: uart2_default {
  85                                         default_mux {
  86                                                 function = "u2";
  87                                                 groups = "u2rxtx_c_1";
  88                                         };
  89                                         default_cfg1 {
  90                                                 pins = "GPIO29_W2"; /* RXD */
  91                                                 ste,config = <&in_pu>;
  92                                         };
  93
  94                                         default_cfg2 {
  95                                                 pins = "GPIO30_W3"; /* TXD */
  96                                                 ste,config = <&out_hi>;
  97                                         };
  98                                 };
  99
 100                                 uart2_sleep_mode: uart2_sleep {
 101                                         sleep_cfg1 {
 102                                                 pins = "GPIO29_W2"; /* RXD */
 103                                                 ste,config = <&in_wkup_pdis>;
 104                                         };
 105
 106                                         sleep_cfg2 {
 107                                                 pins = "GPIO30_W3"; /* TXD */
 108                                                 ste,config = <&out_wkup_pdis>;
 109                                         };
 110                                 };
 111                         };
 112
 113                         /* Settings for all I2C default and sleep states */
 114                         i2c0 {
 115                                 i2c0_default_mode: i2c_default {
 116                                         default_mux {
 117                                                 function = "i2c0";
 118                                                 groups = "i2c0_a_1";
 119                                         };
 120                                         default_cfg1 {
 121                                                 pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
 122                                                 ste,config = <&in_pu>;
 123                                         };
 124                                 };
 125
 126                                 i2c0_sleep_mode: i2c_sleep {
 127                                         sleep_cfg1 {
 128                                                 pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
 129                                                 ste,config = <&slpm_in_wkup_pdis>;
 130                                         };
 131                                 };
 132                         };
 133
 134                         i2c1 {
 135                                 i2c1_default_mode: i2c_default {
 136                                         default_mux {
 137                                                 function = "i2c1";
 138                                                 groups = "i2c1_b_2";
 139                                         };
 140                                         default_cfg1 {
 141                                                 pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
 142                                                 ste,config = <&in_pu>;
 143                                         };
 144                                 };
 145
 146                                 i2c1_sleep_mode: i2c_sleep {
 147                                         sleep_cfg1 {
 148                                                 pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
 149                                                 ste,config = <&slpm_in_wkup_pdis>;
 150                                         };
 151                                 };
 152                         };
 153
 154                         i2c2 {
 155                                 i2c2_default_mode: i2c_default {
 156                                         default_mux {
 157                                                 function = "i2c2";
 158                                                 groups = "i2c2_b_2";
 159                                         };
 160                                         default_cfg1 {
 161                                                 pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
 162                                                 ste,config = <&in_pu>;
 163                                         };
 164                                 };
 165
 166                                 i2c2_sleep_mode: i2c_sleep {
 167                                         sleep_cfg1 {
 168                                                 pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
 169                                                 ste,config = <&slpm_in_wkup_pdis>;
 170                                         };
 171                                 };
 172                         };
 173
 174                         i2c3 {
 175                                 i2c3_default_mode: i2c_default {
 176                                         default_mux {
 177                                                 function = "i2c3";
 178                                                 groups = "i2c3_c_2";
 179                                         };
 180                                         default_cfg1 {
 181                                                 pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
 182                                                 ste,config = <&in_pu>;
 183                                         };
 184                                 };
 185
 186                                 i2c3_sleep_mode: i2c_sleep {
 187                                         sleep_cfg1 {
 188                                                 pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
 189                                                 ste,config = <&slpm_in_wkup_pdis>;
 190                                         };
 191                                 };
 192                         };
 193
 194                         /*
 195                          * Activating I2C4 will conflict with UART1 about the same pins so do not
 196                          * enable I2C4 and UART1 at the same time.
 197                          */
 198                         i2c4 {
 199                                 i2c4_default_mode: i2c_default {
 200                                         default_mux {
 201                                                 function = "i2c4";
 202                                                 groups = "i2c4_b_1";
 203                                         };
 204                                         default_cfg1 {
 205                                                 pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
 206                                                 ste,config = <&in_pu>;
 207                                         };
 208                                 };
 209
 210                                 i2c4_sleep_mode: i2c_sleep {
 211                                         sleep_cfg1 {
 212                                                 pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
 213                                                 ste,config = <&slpm_in_wkup_pdis>;
 214                                         };
 215                                 };
 216                         };
 217
 218                         /* Settings for all SPI default and sleep states */
 219                         spi2 {
 220                                 spi2_default_mode: spi_default {
 221                                         default_mux {
 222                                                 function = "spi2";
 223                                                 groups = "spi2_oc1_2";
 224                                         };
 225                                         default_cfg1 {
 226                                                 pins = "GPIO216_AG12"; /* FRM */
 227                                                 ste,config = <&gpio_out_hi>;
 228                                         };
 229                                         default_cfg2 {
 230                                                 pins = "GPIO218_AH11"; /* RXD */
 231                                                 ste,config = <&in_pd>;
 232                                         };
 233                                         default_cfg3 {
 234                                                 pins =
 235                                                 "GPIO215_AH13", /* TXD */
 236                                                 "GPIO217_AH12"; /* CLK */
 237                                                 ste,config = <&out_lo>;
 238                                         };
 239                                 };
 240
 241                                 spi2_idle_mode: spi_idle {
 242                                         /*
 243                                          * The idle mode is basically sleep mode sans wakeups. Also
 244                                          * note that we have muxes the pins off the function here
 245                                          * as we do not state any muxing.
 246                                          */
 247                                         idle_cfg1 {
 248                                                 pins = "GPIO218_AH11"; /* RXD */
 249                                                 ste,config = <&slpm_in_pdis>;
 250                                         };
 251                                         idle_cfg2 {
 252                                                 pins = "GPIO215_AH13"; /* TXD */
 253                                                 ste,config = <&slpm_out_lo_pdis>;
 254                                         };
 255                                         idle_cfg3 {
 256                                                 pins = "GPIO217_AH12"; /* CLK */
 257                                                 ste,config = <&slpm_pdis>;
 258                                         };
 259                                 };
 260
 261                                 spi2_sleep_mode: spi_sleep {
 262                                         sleep_cfg1 {
 263                                                 pins =
 264                                                 "GPIO216_AG12", /* FRM */
 265                                                 "GPIO218_AH11"; /* RXD */
 266                                                 ste,config = <&slpm_in_wkup_pdis>;
 267                                         };
 268                                         sleep_cfg2 {
 269                                                 pins = "GPIO215_AH13"; /* TXD */
 270                                                 ste,config = <&slpm_out_lo_wkup_pdis>;
 271                                         };
 272                                         sleep_cfg3 {
 273                                                 pins = "GPIO217_AH12"; /* CLK */
 274                                                 ste,config = <&slpm_wkup_pdis>;
 275                                         };
 276                                 };
 277                         };
 278
 279                         /* Settings for all MMC/SD/SDIO default and sleep states */
 280                         sdi0 {
 281                                 /* This is the external SD card slot, 4 bits wide */
 282                                 sdi0_default_mode: sdi0_default {
 283                                         default_mux {
 284                                                 function = "mc0";
 285                                                 groups = "mc0_a_1";
 286                                         };
 287                                         default_cfg1 {
 288                                                 pins =
 289                                                 "GPIO18_AC2", /* CMDDIR */
 290                                                 "GPIO19_AC1", /* DAT0DIR */
 291                                                 "GPIO20_AB4"; /* DAT2DIR */
 292                                                 ste,config = <&out_hi>;
 293                                         };
 294                                         default_cfg2 {
 295                                                 pins = "GPIO22_AA3"; /* FBCLK */
 296                                                 ste,config = <&in_nopull>;
 297                                         };
 298                                         default_cfg3 {
 299                                                 pins = "GPIO23_AA4"; /* CLK */
 300                                                 ste,config = <&out_lo>;
 301                                         };
 302                                         default_cfg4 {
 303                                                 pins =
 304                                                 "GPIO24_AB2", /* CMD */
 305                                                 "GPIO25_Y4", /* DAT0 */
 306                                                 "GPIO26_Y2", /* DAT1 */
 307                                                 "GPIO27_AA2", /* DAT2 */
 308                                                 "GPIO28_AA1"; /* DAT3 */
 309                                                 ste,config = <&in_pu>;
 310                                         };
 311                                 };
 312
 313                                 sdi0_sleep_mode: sdi0_sleep {
 314                                         sleep_cfg1 {
 315                                                 pins =
 316                                                 "GPIO18_AC2", /* CMDDIR */
 317                                                 "GPIO19_AC1", /* DAT0DIR */
 318                                                 "GPIO20_AB4"; /* DAT2DIR */
 319                                                 ste,config = <&slpm_out_hi_wkup_pdis>;
 320                                         };
 321                                         sleep_cfg2 {
 322                                                 pins =
 323                                                 "GPIO22_AA3", /* FBCLK */
 324                                                 "GPIO24_AB2", /* CMD */
 325                                                 "GPIO25_Y4", /* DAT0 */
 326                                                 "GPIO26_Y2", /* DAT1 */
 327                                                 "GPIO27_AA2", /* DAT2 */
 328                                                 "GPIO28_AA1"; /* DAT3 */
 329                                                 ste,config = <&slpm_in_wkup_pdis>;
 330                                         };
 331                                         sleep_cfg3 {
 332                                                 pins = "GPIO23_AA4"; /* CLK */
 333                                                 ste,config = <&slpm_out_lo_wkup_pdis>;
 334                                         };
 335                                 };
 336                         };
 337
 338                         sdi1 {
 339                                 /* This is the WLAN SDIO 4 bits wide */
 340                                 sdi1_default_mode: sdi1_default {
 341                                         default_mux {
 342                                                 function = "mc1";
 343                                                 groups = "mc1_a_1";
 344                                         };
 345                                         default_cfg1 {
 346                                                 pins = "GPIO208_AH16"; /* CLK */
 347                                                 ste,config = <&out_lo>;
 348                                         };
 349                                         default_cfg2 {
 350                                                 pins = "GPIO209_AG15"; /* FBCLK */
 351                                                 ste,config = <&in_nopull>;
 352                                         };
 353                                         default_cfg3 {
 354                                                 pins =
 355                                                 "GPIO210_AJ15", /* CMD */
 356                                                 "GPIO211_AG14", /* DAT0 */
 357                                                 "GPIO212_AF13", /* DAT1 */
 358                                                 "GPIO213_AG13", /* DAT2 */
 359                                                 "GPIO214_AH15"; /* DAT3 */
 360                                                 ste,config = <&in_pu>;
 361                                         };
 362                                 };
 363
 364                                 sdi1_sleep_mode: sdi1_sleep {
 365                                         sleep_cfg1 {
 366                                                 pins = "GPIO208_AH16"; /* CLK */
 367                                                 ste,config = <&slpm_out_lo_wkup_pdis>;
 368                                         };
 369                                         sleep_cfg2 {
 370                                                 pins =
 371                                                 "GPIO209_AG15", /* FBCLK */
 372                                                 "GPIO210_AJ15", /* CMD */
 373                                                 "GPIO211_AG14", /* DAT0 */
 374                                                 "GPIO212_AF13", /* DAT1 */
 375                                                 "GPIO213_AG13", /* DAT2 */
 376                                                 "GPIO214_AH15"; /* DAT3 */
 377                                                 ste,config = <&slpm_in_wkup_pdis>;
 378                                         };
 379                                 };
 380                         };
 381
 382                         sdi2 {
 383                                 /* This is the eMMC 8 bits wide, usually PoP eMMC */
 384                                 sdi2_default_mode: sdi2_default {
 385                                         default_mux {
 386                                                 function = "mc2";
 387                                                 groups = "mc2_a_1";
 388                                         };
 389                                         default_cfg1 {
 390                                                 pins = "GPIO128_A5"; /* CLK */
 391                                                 ste,config = <&out_lo>;
 392                                         };
 393                                         default_cfg2 {
 394                                                 pins = "GPIO130_C8"; /* FBCLK */
 395                                                 ste,config = <&in_nopull>;
 396                                         };
 397                                         default_cfg3 {
 398                                                 pins =
 399                                                 "GPIO129_B4", /* CMD */
 400                                                 "GPIO131_A12", /* DAT0 */
 401                                                 "GPIO132_C10", /* DAT1 */
 402                                                 "GPIO133_B10", /* DAT2 */
 403                                                 "GPIO134_B9", /* DAT3 */
 404                                                 "GPIO135_A9", /* DAT4 */
 405                                                 "GPIO136_C7", /* DAT5 */
 406                                                 "GPIO137_A7", /* DAT6 */
 407                                                 "GPIO138_C5"; /* DAT7 */
 408                                                 ste,config = <&in_pu>;
 409                                         };
 410                                 };
 411
 412                                 sdi2_sleep_mode: sdi2_sleep {
 413                                         sleep_cfg1 {
 414                                                 pins = "GPIO128_A5"; /* CLK */
 415                                                 ste,config = <&out_lo_wkup_pdis>;
 416                                         };
 417                                         sleep_cfg2 {
 418                                                 pins =
 419                                                 "GPIO130_C8", /* FBCLK */
 420                                                 "GPIO129_B4"; /* CMD */
 421                                                 ste,config = <&in_wkup_pdis_en>;
 422                                         };
 423                                         sleep_cfg3 {
 424                                                 pins =
 425                                                 "GPIO131_A12", /* DAT0 */
 426                                                 "GPIO132_C10", /* DAT1 */
 427                                                 "GPIO133_B10", /* DAT2 */
 428                                                 "GPIO134_B9", /* DAT3 */
 429                                                 "GPIO135_A9", /* DAT4 */
 430                                                 "GPIO136_C7", /* DAT5 */
 431                                                 "GPIO137_A7", /* DAT6 */
 432                                                 "GPIO138_C5"; /* DAT7 */
 433                                                 ste,config = <&in_wkup_pdis>;
 434                                         };
 435                                 };
 436                         };
 437
 438                         sdi4 {
 439                                 /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
 440                                 sdi4_default_mode: sdi4_default {
 441                                         default_mux {
 442                                                 function = "mc4";
 443                                                 groups = "mc4_a_1";
 444                                         };
 445                                         default_cfg1 {
 446                                                 pins = "GPIO203_AE23"; /* CLK */
 447                                                 ste,config = <&out_lo>;
 448                                         };
 449                                         default_cfg2 {
 450                                                 pins = "GPIO202_AF25"; /* FBCLK */
 451                                                 ste,config = <&in_nopull>;
 452                                         };
 453                                         default_cfg3 {
 454                                                 pins =
 455                                                 "GPIO201_AF24", /* CMD */
 456                                                 "GPIO200_AH26", /* DAT0 */
 457                                                 "GPIO199_AH23", /* DAT1 */
 458                                                 "GPIO198_AG25", /* DAT2 */
 459                                                 "GPIO197_AH24", /* DAT3 */
 460                                                 "GPIO207_AJ23", /* DAT4 */
 461                                                 "GPIO206_AG24", /* DAT5 */
 462                                                 "GPIO205_AG23", /* DAT6 */
 463                                                 "GPIO204_AF23"; /* DAT7 */
 464                                                 ste,config = <&in_pu>;
 465                                         };
 466                                 };
 467
 468                                 sdi4_sleep_mode: sdi4_sleep {
 469                                         sleep_cfg1 {
 470                                                 pins = "GPIO203_AE23"; /* CLK */
 471                                                 ste,config = <&out_lo_wkup_pdis>;
 472                                         };
 473                                         sleep_cfg2 {
 474                                                 pins =
 475                                                 "GPIO202_AF25", /* FBCLK */
 476                                                 "GPIO201_AF24", /* CMD */
 477                                                 "GPIO200_AH26", /* DAT0 */
 478                                                 "GPIO199_AH23", /* DAT1 */
 479                                                 "GPIO198_AG25", /* DAT2 */
 480                                                 "GPIO197_AH24", /* DAT3 */
 481                                                 "GPIO207_AJ23", /* DAT4 */
 482                                                 "GPIO206_AG24", /* DAT5 */
 483                                                 "GPIO205_AG23", /* DAT6 */
 484                                                 "GPIO204_AF23"; /* DAT7 */
 485                                                 ste,config = <&slpm_in_wkup_pdis>;
 486                                         };
 487                                 };
 488                         };
 489
 490                         /*
 491                          * Multi-rate serial ports (MSPs) - MSP3 output is internal and
 492                          * cannot be muxed onto any pins.
 493                          */
 494                         msp0 {
 495                                 msp0_default_mode: msp0_default {
 496                                         default_msp0_mux {
 497                                                 function = "msp0";
 498                                                 groups = "msp0txrx_a_1", "msp0tfstck_a_1";
 499                                         };
 500                                         default_msp0_cfg {
 501                                                 pins =
 502                                                 "GPIO12_AC4", /* TXD */
 503                                                 "GPIO15_AC3", /* RXD */
 504                                                 "GPIO13_AF3", /* TFS */
 505                                                 "GPIO14_AE3"; /* TCK */
 506                                                 ste,config = <&in_nopull>;
 507                                         };
 508                                 };
 509                         };
 510
 511                         msp1 {
 512                                 msp1_default_mode: msp1_default {
 513                                         default_mux {
 514                                                 function = "msp1";
 515                                                 groups = "msp1txrx_a_1", "msp1_a_1";
 516                                         };
 517                                         default_cfg1 {
 518                                                 pins = "GPIO33_AF2";
 519                                                 ste,config = <&out_lo>;
 520                                         };
 521                                         default_cfg2 {
 522                                                 pins =
 523                                                 "GPIO34_AE1",
 524                                                 "GPIO35_AE2",
 525                                                 "GPIO36_AG2";
 526                                                 ste,config = <&in_nopull>;
 527                                         };
 528
 529                                 };
 530                         };
 531
 532                         msp2 {
 533                                 msp2_default_mode: msp2_default {
 534                                         /* MSP2 usually used for HDMI audio */
 535                                         default_mux {
 536                                                 function = "msp2";
 537                                                 groups = "msp2_a_1";
 538                                         };
 539                                         default_cfg1 {
 540                                                 pins =
 541                                                 "GPIO193_AH27", /* TXD */
 542                                                 "GPIO194_AF27", /* TCK */
 543                                                 "GPIO195_AG28"; /* TFS */
 544                                                 ste,config = <&in_pd>;
 545                                         };
 546                                         default_cfg2 {
 547                                                 pins = "GPIO196_AG26"; /* RXD */
 548                                                 ste,config = <&out_lo>;
 549                                         };
 550                                 };
 551                         };
 552
 553
 554                         musb {
 555                                 musb_default_mode: musb_default {
 556                                         default_mux {
 557                                                 function = "usb";
 558                                                 groups = "usb_a_1";
 559                                         };
 560                                         default_cfg1 {
 561                                                 pins =
 562                                                 "GPIO256_AF28", /* NXT */
 563                                                 "GPIO258_AD29", /* XCLK */
 564                                                 "GPIO259_AC29", /* DIR */
 565                                                 "GPIO260_AD28", /* DAT7 */
 566                                                 "GPIO261_AD26", /* DAT6 */
 567                                                 "GPIO262_AE26", /* DAT5 */
 568                                                 "GPIO263_AG29", /* DAT4 */
 569                                                 "GPIO264_AE27", /* DAT3 */
 570                                                 "GPIO265_AD27", /* DAT2 */
 571                                                 "GPIO266_AC28", /* DAT1 */
 572                                                 "GPIO267_AC27"; /* DAT0 */
 573                                                 ste,config = <&in_nopull>;
 574                                         };
 575                                         default_cfg2 {
 576                                                 pins = "GPIO257_AE29"; /* STP */
 577                                                 ste,config = <&out_hi>;
 578                                         };
 579                                 };
 580
 581                                 musb_sleep_mode: musb_sleep {
 582                                         sleep_cfg1 {
 583                                                 pins =
 584                                                 "GPIO256_AF28", /* NXT */
 585                                                 "GPIO258_AD29", /* XCLK */
 586                                                 "GPIO259_AC29"; /* DIR */
 587                                                 ste,config = <&slpm_wkup_pdis_en>;
 588                                         };
 589                                         sleep_cfg2 {
 590                                                 pins = "GPIO257_AE29"; /* STP */
 591                                                 ste,config = <&slpm_out_hi_wkup_pdis>;
 592                                         };
 593                                         sleep_cfg3 {
 594                                                 pins =
 595                                                 "GPIO260_AD28", /* DAT7 */
 596                                                 "GPIO261_AD26", /* DAT6 */
 597                                                 "GPIO262_AE26", /* DAT5 */
 598                                                 "GPIO263_AG29", /* DAT4 */
 599                                                 "GPIO264_AE27", /* DAT3 */
 600                                                 "GPIO265_AD27", /* DAT2 */
 601                                                 "GPIO266_AC28", /* DAT1 */
 602                                                 "GPIO267_AC27"; /* DAT0 */
 603                                                 ste,config = <&slpm_in_wkup_pdis_en>;
 604                                         };
 605                                 };
 606                         };
 607
 608                         mcde {
 609                                 lcd_default_mode: lcd_default {
 610                                         default_mux {
 611                                                 /* Mux in VSI0 and all the data lines */
 612                                                 function = "lcd";
 613                                                 groups =
 614                                                 "lcdvsi0_a_1", /* VSI0 for LCD */
 615                                                 "lcd_d0_d7_a_1", /* Data lines */
 616                                                 "lcd_d8_d11_a_1", /* TV-out */
 617                                                 "lcdaclk_b_1", /* Clock line for TV-out */
 618                                                 "lcdvsi1_a_1"; /* VSI1 for HDMI */
 619                                         };
 620                                         default_cfg1 {
 621                                                 pins =
 622                                                 "GPIO68_E1", /* VSI0 */
 623                                                 "GPIO69_E2"; /* VSI1 */
 624                                                 ste,config = <&in_pu>;
 625                                         };
 626                                 };
 627                                 lcd_sleep_mode: lcd_sleep {
 628                                         sleep_cfg1 {
 629                                                 pins = "GPIO69_E2"; /* VSI1 */
 630                                                 ste,config = <&slpm_in_wkup_pdis>;
 631                                         };
 632                                 };
 633                         };
 634
 635                         ske {
 636                                 /* SKE keys on position 2 in an 8x8 matrix */
 637                                 ske_kpa2_default_mode: ske_kpa2_default {
 638                                         default_mux {
 639                                                 function = "kp";
 640                                                 groups = "kp_a_2";
 641                                         };
 642                                         default_cfg1 {
 643                                                 pins =
 644                                                 "GPIO153_B17", /* I7 */
 645                                                 "GPIO154_C16", /* I6 */
 646                                                 "GPIO155_C19", /* I5 */
 647                                                 "GPIO156_C17", /* I4 */
 648                                                 "GPIO161_D21", /* I3 */
 649                                                 "GPIO162_D20", /* I2 */
 650                                                 "GPIO163_C20", /* I1 */
 651                                                 "GPIO164_B21"; /* I0 */
 652                                                 ste,config = <&in_pd>;
 653                                         };
 654                                         default_cfg2 {
 655                                                 pins =
 656                                                 "GPIO157_A18", /* O7 */
 657                                                 "GPIO158_C18", /* O6 */
 658                                                 "GPIO159_B19", /* O5 */
 659                                                 "GPIO160_B20", /* O4 */
 660                                                 "GPIO165_C21", /* O3 */
 661                                                 "GPIO166_A22", /* O2 */
 662                                                 "GPIO167_B24", /* O1 */
 663                                                 "GPIO168_C22"; /* O0 */
 664                                                 ste,config = <&out_lo>;
 665                                         };
 666                                 };
 667                                 ske_kpa2_sleep_mode: ske_kpa2_sleep {
 668                                         sleep_cfg1 {
 669                                                 pins =
 670                                                 "GPIO153_B17", /* I7 */
 671                                                 "GPIO154_C16", /* I6 */
 672                                                 "GPIO155_C19", /* I5 */
 673                                                 "GPIO156_C17", /* I4 */
 674                                                 "GPIO161_D21", /* I3 */
 675                                                 "GPIO162_D20", /* I2 */
 676                                                 "GPIO163_C20", /* I1 */
 677                                                 "GPIO164_B21"; /* I0 */
 678                                                 ste,config = <&slpm_in_pu_wkup_pdis_en>;
 679                                         };
 680                                         sleep_cfg2 {
 681                                                 pins =
 682                                                 "GPIO157_A18", /* O7 */
 683                                                 "GPIO158_C18", /* O6 */
 684                                                 "GPIO159_B19", /* O5 */
 685                                                 "GPIO160_B20", /* O4 */
 686                                                 "GPIO165_C21", /* O3 */
 687                                                 "GPIO166_A22", /* O2 */
 688                                                 "GPIO167_B24", /* O1 */
 689                                                 "GPIO168_C22"; /* O0 */
 690                                                 ste,config = <&slpm_out_lo_pdis>;
 691                                         };
 692                                 };
 693                                 /*
 694                                  * SKE keys on position 1 and "other C1" combi giving
 695                                  * six rows of six keys.
 696                                  */
 697                                 ske_kpaoc1_default_mode: ske_kpaoc1_default {
 698                                         default_mux {
 699                                                 function = "kp";
 700                                                 groups = "kp_a_1", "kp_oc1_1";
 701                                         };
 702                                         default_cfg1 {
 703                                                 pins =
 704                                                 "GPIO91_B6", /* KP_O0 */
 705                                                 "GPIO90_A3", /* KP_O1 */
 706                                                 "GPIO87_B3", /* KP_O2 */
 707                                                 "GPIO86_C6", /* KP_O3 */
 708                                                 "GPIO96_D8", /* KP_O6 */
 709                                                 "GPIO94_D7"; /* KP_O7 */
 710                                                 ste,config = <&out_lo>;
 711                                         };
 712                                         default_cfg2 {
 713                                                 pins =
 714                                                 "GPIO93_B7", /* KP_I0 */
 715                                                 "GPIO92_D6", /* KP_I1 */
 716                                                 "GPIO89_E6", /* KP_I2 */
 717                                                 "GPIO88_C4", /* KP_I3 */
 718                                                 "GPIO97_D9", /* KP_I6 */
 719                                                 "GPIO95_E8"; /* KP_I7 */
 720                                                 ste,config = <&in_pu>;
 721                                         };
 722                                 };
 723                         };
 724
 725                         wlan {
 726                                 wlan_default_mode: wlan_default {
 727                                         /*
 728                                          * Activate this mode with the WLAN chip.
 729                                          * These are plain GPIO pins used by WLAN
 730                                          */
 731                                         default_cfg1 {
 732                                                 pins =
 733                                                 "GPIO226_AF8", /* WLAN_PMU_EN */
 734                                                 "GPIO85_D5"; /* WLAN_ENA */
 735                                                 ste,config = <&gpio_out_lo>;
 736                                         };
 737                                         default_cfg2 {
 738                                                 pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
 739                                                 ste,config = <&gpio_in_pu>;
 740                                         };
 741                                 };
 742                         };
 743                 };
 744         };
 745 };