arch/arm/boot/dts/ste-hrefv60plus.dtsi

   1 /*
   2  * Copyright 2012 ST-Ericsson AB
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "ste-dbx5x0.dtsi"
  13 #include "ste-href-ab8500.dtsi"
  14 #include "ste-href.dtsi"
  15
  16 / {
  17         model = "ST-Ericsson HREF (v60+) platform with Device Tree";
  18         compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
  19
  20         soc {
  21                 // External Micro SD slot
  22                 sdi0_per1@80126000 {
  23                         cd-gpios  = <&gpio2 31 0x4>; // 95
  24                 };
  25
  26                 vmmci: regulator-gpio {
  27                         gpios = <&gpio0 5 0x4>;
  28                         enable-gpio = <&gpio5 9 0x4>;
  29                 };
  30
  31                 pinctrl {
  32                         /*
  33                          * Set this up using hogs, as time goes by and as seems fit, these
  34                          * can be moved over to being controlled by respective device.
  35                          */
  36                         pinctrl-names = "default";
  37                         pinctrl-0 = <&ipgpio_hrefv60_mode>,
  38                                   <&accel_hrefv60_mode>,
  39                                   <&magneto_hrefv60_mode>,
  40                                   <&etm_hrefv60_mode>,
  41                                   <&nahj_hrefv60_mode>,
  42                                   <&nfc_hrefv60_mode>,
  43                                   <&force_hrefv60_mode>,
  44                                   <&dipro_hrefv60_mode>,
  45                                   <&vaudio_hf_hrefv60_mode>,
  46                                   <&gbf_hrefv60_mode>,
  47                                   <&hdtv_hrefv60_mode>,
  48                                   <&touch_hrefv60_mode>;
  49
  50                         sdi0 {
  51                                 /* SD card detect GPIO pin, extend default state */
  52                                 sdi0_default_mode: sdi0_default {
  53                                         default_hrefv60_cfg1 {
  54                                                 ste,pins = "GPIO95_E8";
  55                                                 ste,config = <&gpio_in_pu>;
  56                                         };
  57                                 };
  58                         };
  59                         ipgpio {
  60                                 /*
  61                                  * XENON Flashgun on image processor GPIO (controlled from image
  62                                  * processor firmware), mux in these image processor GPIO lines 0
  63                                  * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
  64                                  * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
  65                                  * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
  66                                  */
  67                                 ipgpio_hrefv60_mode: ipgpio_hrefv60 {
  68                                         hrefv60_mux {
  69                                                 ste,function = "ipgpio";
  70                                                 ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
  71                                         };
  72                                         hrefv60_cfg1 {
  73                                                 ste,pins = "GPIO6_AF6", "GPIO7_AG5";
  74                                                 ste,config = <&in_pu>;
  75                                         };
  76                                         hrefv60_cfg2 {
  77                                                 ste,pins = "GPIO21_AB3";
  78                                                 ste,config = <&gpio_out_lo>;
  79                                         };
  80                                         hrefv60_cfg3 {
  81                                                 ste,pins = "GPIO64_F3";
  82                                                 ste,config = <&out_lo>;
  83                                         };
  84                                 };
  85                         };
  86                         accelerometer {
  87                                 accel_hrefv60_mode: accel_hrefv60 {
  88                                         /* Accelerometer interrupt lines 1 & 2 */
  89                                         hrefv60_cfg1 {
  90                                                 ste,pins = "GPIO82_C1", "GPIO83_D3";
  91                                                 ste,config = <&gpio_in_pu>;
  92                                         };
  93                                 };
  94                         };
  95                         magnetometer {
  96                                 magneto_hrefv60_mode: magneto_hrefv60 {
  97                                         /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
  98                                         hrefv60_cfg1 {
  99                                                 ste,pins = "GPIO31_V3";
 100                                                 ste,config = <&gpio_in_pu>;
 101                                         };
 102                                         hrefv60_cfg2 {
 103                                                 ste,pins = "GPIO32_V2";
 104                                                 ste,config = <&gpio_in_pd>;
 105                                         };
 106                                 };
 107                         };
 108                         etm {
 109                                 /*
 110                                  * Drive D19-D23 for the ETM PTM trace interface low,
 111                                  * (presumably pins are unconnected therefore grounded here,
 112                                  * the "other alt C1" setting enables these pins)
 113                                  */
 114                                 etm_hrefv60_mode: etm_hrefv60 {
 115                                         hrefv60_cfg1 {
 116                                                 ste,pins =
 117                                                 "GPIO70_G5",
 118                                                 "GPIO71_G4",
 119                                                 "GPIO72_H4",
 120                                                 "GPIO73_H3",
 121                                                 "GPIO74_J3";
 122                                                 ste,config = <&gpio_out_lo>;
 123                                         };
 124                                  };
 125                         };
 126                         nahj {
 127                                 nahj_hrefv60_mode: nahj_hrefv60 {
 128                                         /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
 129                                         hrefv60_cfg1 {
 130                                                 ste,pins = "GPIO76_J2";
 131                                                 ste,config = <&gpio_out_lo>;
 132                                         };
 133                                         hrefv60_cfg2 {
 134                                                 ste,pins = "GPIO216_AG12";
 135                                                 ste,config = <&gpio_out_hi>;
 136                                         };
 137                                  };
 138                         };
 139                         nfc {
 140                                 nfc_hrefv60_mode: nfc_hrefv60 {
 141                                         /* NFC ENA and RESET to low, pulldown IRQ line */
 142                                         hrefv60_cfg1 {
 143                                                 ste,pins =
 144                                                 "GPIO77_H1", /* NFC_ENA */
 145                                                 "GPIO142_C11"; /* NFC_RESET */
 146                                                 ste,config = <&gpio_out_lo>;
 147                                         };
 148                                         hrefv60_cfg2 {
 149                                                 ste,pins = "GPIO144_B13"; /* NFC_IRQ */
 150                                                 ste,config = <&gpio_in_pd>;
 151                                         };
 152                                  };
 153                         };
 154                         force {
 155                                 force_hrefv60_mode: force_hrefv60 {
 156                                         hrefv60_cfg1 {
 157                                                 ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
 158                                                 ste,config = <&gpio_in_pu>;
 159                                         };
 160                                         hrefv60_cfg2 {
 161                                                 ste,pins =
 162                                                 "GPIO92_D6", /* FORCE_SENSING_RST */
 163                                                 "GPIO97_D9"; /* FORCE_SENSING_WU */
 164                                                 ste,config = <&gpio_out_lo>;
 165                                         };
 166                                  };
 167                         };
 168                         dipro {
 169                                 dipro_hrefv60_mode: dipro_hrefv60 {
 170                                         hrefv60_cfg1 {
 171                                                 ste,pins = "GPIO139_C9"; /* DIPRO_INT */
 172                                                 ste,config = <&gpio_in_pu>;
 173                                         };
 174                                  };
 175                         };
 176                         vaudio_hf {
 177                                 vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
 178                                         /* Audio Amplifier HF enable GPIO */
 179                                         hrefv60_cfg1 {
 180                                                 ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
 181                                                 ste,config = <&gpio_out_hi>;
 182                                         };
 183                                  };
 184                         };
 185                         gbf {
 186                                 gbf_hrefv60_mode: gbf_hrefv60 {
 187                                         /*
 188                                          * GBF (GPS, Bluetooth, FM-radio) interface,
 189                                          * pull low to reset state
 190                                          */
 191                                         hrefv60_cfg1 {
 192                                                 ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
 193                                                 ste,config = <&gpio_out_lo>;
 194                                         };
 195                                  };
 196                         };
 197                         hdtv {
 198                                 hdtv_hrefv60_mode: hdtv_hrefv60 {
 199                                         /* MSP : HDTV INTERFACE GPIO line */
 200                                         hrefv60_cfg1 {
 201                                                 ste,pins = "GPIO192_AJ27";
 202                                                 ste,config = <&gpio_in_pd>;
 203                                         };
 204                                  };
 205                         };
 206                         touch {
 207                                 touch_hrefv60_mode: touch_hrefv60 {
 208                                         /*
 209                                          * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
 210                                          * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
 211                                          * reset signals low.
 212                                          */
 213                                         hrefv60_cfg1 {
 214                                                 ste,pins = "GPIO143_D12", "GPIO146_D13";
 215                                                 ste,config = <&gpio_out_lo>;
 216                                         };
 217                                         hrefv60_cfg2 {
 218                                                 ste,pins = "GPIO67_G2";
 219                                                 ste,config = <&gpio_in_pu>;
 220                                         };
 221                                 };
 222                         };
 223                         mcde {
 224                                 lcd_hrefv60_mode: lcd_hrefv60 {
 225                                         /*
 226                                          * Display Interface 1 uses GPIO 65 for RST (reset).
 227                                          * Display Interface 2 uses GPIO 66 for RST (reset).
 228                                          * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
 229                                          */
 230                                         hrefv60_cfg1 {
 231                                                 ste,pins ="GPIO65_F1";
 232                                                 ste,config = <&gpio_out_hi>;
 233                                         };
 234                                         hrefv60_cfg2 {
 235                                                 ste,pins ="GPIO66_G3";
 236                                                 ste,config = <&gpio_out_lo>;
 237                                         };
 238                                 };
 239                         };
 240                 };
 241         };
 242 };