2 * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
3 * Author: Patrice Chotard <patrice.chotard@st.com>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
10 #include "stih410.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
14 model = "STiH410 B2260";
15 compatible = "st,stih410-b2260", "st,stih410";
18 bootargs = "clk_ignore_unused";
23 device_type = "memory";
24 reg = <0x40000000 0x40000000>;
29 ethernet0 = ðernet0;
33 compatible = "gpio-leds";
35 label = "User_green_1";
36 gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
37 linux,default-trigger = "heartbeat";
38 default-state = "off";
42 label = "User_green_2";
43 gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
44 default-state = "off";
48 label = "User_green_3";
49 gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
50 default-state = "off";
54 label = "User_green_4";
55 gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
56 default-state = "off";
61 compatible = "simple-audio-card";
62 simple-audio-card,name = "STI-B2260";
67 simple-audio-card,dai-link@0 {
73 sound-dai = <&sti_uni_player0>;
77 sound-dai = <&sti_hdmi>;
83 /* Low speed expansion connector */
84 uart0: serial@9830000 {
86 pinctrl-names = "default", "no-hw-flowctrl";
87 pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
88 pinctrl-1 = <&pinctrl_serial0>;
89 rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
94 /* Low speed expansion connector */
95 uart1: serial@9831000 {
100 /* Low speed expansion connector */
103 cs-gpios = <&pio30 3 0>;
107 /* Low speed expansion connector */
113 /* Low speed expansion connector */
119 /* high speed expansion connector */
122 pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
126 /* high speed expansion connector */
129 pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
133 mmc0: sdhci@9060000 {
134 pinctrl-0 = <&pinctrl_sd0>;
139 /* high speed expansion connector */
140 mmc1: sdhci@9080000 {
152 usb2_picophy1: phy2@0 {
156 usb2_picophy2: phy3@0 {
176 st_dwc3: dwc3@8f94000 {
180 ethernet0: dwmac@9630000 {
182 pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
184 snps,phy-bus-name = "stmmac";
185 snps,phy-bus-id = <0>;
187 snps,reset-gpio = <&pio0 7 0>;
188 snps,reset-active-low;
189 snps,reset-delays-us = <0 10000 1000000>;
194 sti_uni_player0: sti-uni-player@8d80000 {
198 hdmiddc: i2c@9541000 {
199 /* HDMI V1.3a supports Standard mode only */
200 clock-frequency = <100000>;
201 st,i2c-min-scl-pulse-width-us = <0>;
202 st,i2c-min-sda-pulse-width-us = <5>;
206 miphy28lp_phy: miphy28lp@0 {
208 phy_port1: port@9b2a000 {
213 sata1: sata@9b28000 {