arch/arm/boot/dts/stm32mp157-pinctrl.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
   4  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
   5  */
   6 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
   7
   8 / {
   9         soc {
  10                 pinctrl: pin-controller {
  11                         #address-cells = <1>;
  12                         #size-cells = <1>;
  13                         compatible = "st,stm32mp157-pinctrl";
  14                         ranges = <0 0x50002000 0xa400>;
  15                         interrupt-parent = <&exti>;
  16                         st,syscfg = <&exti 0x60 0xff>;
  17                         pins-are-numbered;
  18
  19                         gpioa: gpio@50002000 {
  20                                 gpio-controller;
  21                                 #gpio-cells = <2>;
  22                                 interrupt-controller;
  23                                 #interrupt-cells = <2>;
  24                                 reg = <0x0 0x400>;
  25                                 clocks = <&clk_pll3_p>;
  26                                 st,bank-name = "GPIOA";
  27                                 ngpios = <16>;
  28                                 gpio-ranges = <&pinctrl 0 0 16>;
  29                         };
  30
  31                         gpiob: gpio@50003000 {
  32                                 gpio-controller;
  33                                 #gpio-cells = <2>;
  34                                 interrupt-controller;
  35                                 #interrupt-cells = <2>;
  36                                 reg = <0x1000 0x400>;
  37                                 clocks = <&clk_pll3_p>;
  38                                 st,bank-name = "GPIOB";
  39                                 ngpios = <16>;
  40                                 gpio-ranges = <&pinctrl 0 16 16>;
  41                         };
  42
  43                         gpioc: gpio@50004000 {
  44                                 gpio-controller;
  45                                 #gpio-cells = <2>;
  46                                 interrupt-controller;
  47                                 #interrupt-cells = <2>;
  48                                 reg = <0x2000 0x400>;
  49                                 clocks = <&clk_pll3_p>;
  50                                 st,bank-name = "GPIOC";
  51                                 ngpios = <16>;
  52                                 gpio-ranges = <&pinctrl 0 32 16>;
  53                         };
  54
  55                         gpiod: gpio@50005000 {
  56                                 gpio-controller;
  57                                 #gpio-cells = <2>;
  58                                 interrupt-controller;
  59                                 #interrupt-cells = <2>;
  60                                 reg = <0x3000 0x400>;
  61                                 clocks = <&clk_pll3_p>;
  62                                 st,bank-name = "GPIOD";
  63                                 ngpios = <16>;
  64                                 gpio-ranges = <&pinctrl 0 48 16>;
  65                         };
  66
  67                         gpioe: gpio@50006000 {
  68                                 gpio-controller;
  69                                 #gpio-cells = <2>;
  70                                 interrupt-controller;
  71                                 #interrupt-cells = <2>;
  72                                 reg = <0x4000 0x400>;
  73                                 clocks = <&clk_pll3_p>;
  74                                 st,bank-name = "GPIOE";
  75                                 ngpios = <16>;
  76                                 gpio-ranges = <&pinctrl 0 64 16>;
  77                         };
  78
  79                         gpiof: gpio@50007000 {
  80                                 gpio-controller;
  81                                 #gpio-cells = <2>;
  82                                 interrupt-controller;
  83                                 #interrupt-cells = <2>;
  84                                 reg = <0x5000 0x400>;
  85                                 clocks = <&clk_pll3_p>;
  86                                 st,bank-name = "GPIOF";
  87                                 ngpios = <16>;
  88                                 gpio-ranges = <&pinctrl 0 80 16>;
  89                         };
  90
  91                         gpiog: gpio@50008000 {
  92                                 gpio-controller;
  93                                 #gpio-cells = <2>;
  94                                 interrupt-controller;
  95                                 #interrupt-cells = <2>;
  96                                 reg = <0x6000 0x400>;
  97                                 clocks = <&clk_pll3_p>;
  98                                 st,bank-name = "GPIOG";
  99                                 ngpios = <16>;
 100                                 gpio-ranges = <&pinctrl 0 96 16>;
 101                         };
 102
 103                         gpioh: gpio@50009000 {
 104                                 gpio-controller;
 105                                 #gpio-cells = <2>;
 106                                 interrupt-controller;
 107                                 #interrupt-cells = <2>;
 108                                 reg = <0x7000 0x400>;
 109                                 clocks = <&clk_pll3_p>;
 110                                 st,bank-name = "GPIOH";
 111                                 ngpios = <16>;
 112                                 gpio-ranges = <&pinctrl 0 112 16>;
 113                         };
 114
 115                         gpioi: gpio@5000a000 {
 116                                 gpio-controller;
 117                                 #gpio-cells = <2>;
 118                                 interrupt-controller;
 119                                 #interrupt-cells = <2>;
 120                                 reg = <0x8000 0x400>;
 121                                 clocks = <&clk_pll3_p>;
 122                                 st,bank-name = "GPIOI";
 123                                 ngpios = <16>;
 124                                 gpio-ranges = <&pinctrl 0 128 16>;
 125                         };
 126
 127                         gpioj: gpio@5000b000 {
 128                                 gpio-controller;
 129                                 #gpio-cells = <2>;
 130                                 interrupt-controller;
 131                                 #interrupt-cells = <2>;
 132                                 reg = <0x9000 0x400>;
 133                                 clocks = <&clk_pll3_p>;
 134                                 st,bank-name = "GPIOJ";
 135                                 ngpios = <16>;
 136                                 gpio-ranges = <&pinctrl 0 144 16>;
 137                         };
 138
 139                         gpiok: gpio@5000c000 {
 140                                 gpio-controller;
 141                                 #gpio-cells = <2>;
 142                                 interrupt-controller;
 143                                 #interrupt-cells = <2>;
 144                                 reg = <0xa000 0x400>;
 145                                 clocks = <&clk_pll3_p>;
 146                                 st,bank-name = "GPIOK";
 147                                 ngpios = <8>;
 148                                 gpio-ranges = <&pinctrl 0 160 8>;
 149                         };
 150
 151                         uart4_pins_a: uart4@0 {
 152                                 pins1 {
 153                                         pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
 154                                         bias-disable;
 155                                         drive-push-pull;
 156                                         slew-rate = <0>;
 157                                 };
 158                                 pins2 {
 159                                         pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
 160                                         bias-disable;
 161                                 };
 162                         };
 163                 };
 164
 165                 pinctrl_z: pin-controller-z {
 166                         #address-cells = <1>;
 167                         #size-cells = <1>;
 168                         compatible = "st,stm32mp157-z-pinctrl";
 169                         ranges = <0 0x54004000 0x400>;
 170                         pins-are-numbered;
 171                         interrupt-parent = <&exti>;
 172                         st,syscfg = <&exti 0x60 0xff>;
 173                         status = "disabled";
 174
 175                         gpioz: gpio@54004000 {
 176                                 gpio-controller;
 177                                 #gpio-cells = <2>;
 178                                 interrupt-controller;
 179                                 #interrupt-cells = <2>;
 180                                 reg = <0 0x400>;
 181                                 clocks = <&clk_pll2_p>;
 182                                 st,bank-name = "GPIOZ";
 183                                 st,bank-ioport = <11>;
 184                                 ngpios = <8>;
 185                                 gpio-ranges = <&pinctrl_z 0 400 8>;
 186                         };
 187                 };
 188         };
 189 };