arch/arm/boot/dts/sun6i-a31-i7.dts

   1 /*
   2  * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 /dts-v1/;
  44 #include "sun6i-a31.dtsi"
  45 #include "sunxi-common-regulators.dtsi"
  46
  47 #include <dt-bindings/gpio/gpio.h>
  48
  49 / {
  50         model = "Mele I7 Quad top set box";
  51         compatible = "mele,i7", "allwinner,sun6i-a31";
  52
  53         aliases {
  54                 serial0 = &uart0;
  55         };
  56
  57         chosen {
  58                 stdout-path = "serial0:115200n8";
  59         };
  60
  61         hdmi-connector {
  62                 compatible = "hdmi-connector";
  63                 type = "a";
  64
  65                 port {
  66                         hdmi_con_in: endpoint {
  67                                 remote-endpoint = <&hdmi_out_con>;
  68                         };
  69                 };
  70         };
  71
  72         leds {
  73                 compatible = "gpio-leds";
  74                 pinctrl-names = "default";
  75                 pinctrl-0 = <&led_pins_i7>;
  76
  77                 blue {
  78                         label = "i7:blue:usr";
  79                         gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
  80                 };
  81         };
  82
  83         sound {
  84                 compatible = "simple-audio-card";
  85                 simple-audio-card,name = "On-board SPDIF";
  86                 simple-audio-card,cpu {
  87                         sound-dai = <&spdif>;
  88                 };
  89
  90                 simple-audio-card,codec {
  91                         sound-dai = <&spdif_out>;
  92                 };
  93         };
  94
  95         spdif_out: spdif-out {
  96                 #sound-dai-cells = <0>;
  97                 compatible = "linux,spdif-dit";
  98         };
  99 };
 100
 101 &codec {
 102         allwinner,audio-routing =
 103                 "Headphone", "HP";
 104         status = "okay";
 105 };
 106
 107 &de {
 108         status = "okay";
 109 };
 110
 111 &ehci0 {
 112         status = "okay";
 113 };
 114
 115 &ehci1 {
 116         status = "okay";
 117 };
 118
 119 &gmac {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&gmac_pins_mii_a>;
 122         phy = <&phy1>;
 123         phy-mode = "mii";
 124         status = "okay";
 125
 126         phy1: ethernet-phy@1 {
 127                 reg = <1>;
 128         };
 129 };
 130
 131 &hdmi {
 132         status = "okay";
 133 };
 134
 135 &hdmi_out {
 136         hdmi_out_con: endpoint {
 137                 remote-endpoint = <&hdmi_con_in>;
 138         };
 139 };
 140
 141 &ir {
 142         pinctrl-names = "default";
 143         pinctrl-0 = <&ir_pins_a>;
 144         status = "okay";
 145 };
 146
 147 &mmc0 {
 148         pinctrl-names = "default";
 149         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
 150         vmmc-supply = <&reg_vcc3v3>;
 151         bus-width = <4>;
 152         cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
 153         status = "okay";
 154 };
 155
 156 &pio {
 157         led_pins_i7: led_pins@0 {
 158                 pins = "PH13";
 159                 function = "gpio_out";
 160         };
 161
 162         mmc0_cd_pin_i7: mmc0_cd_pin@0 {
 163                 pins = "PH22";
 164                 function = "gpio_in";
 165                 bias-pull-up;
 166         };
 167
 168         usb1_vbus_pin_i7: usb1_vbus_pin@0 {
 169                 pins = "PC27";
 170                 function = "gpio_out";
 171         };
 172 };
 173
 174 &reg_usb1_vbus {
 175         pinctrl-names = "default";
 176         pinctrl-0 = <&usb1_vbus_pin_i7>;
 177         gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 178         status = "okay";
 179 };
 180
 181 &spdif {
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&spdif_pins_a>;
 184         spdif-out = "okay";
 185         status = "okay";
 186 };
 187
 188 &tcon0 {
 189         status = "okay";
 190 };
 191
 192 &uart0 {
 193         pinctrl-names = "default";
 194         pinctrl-0 = <&uart0_pins_a>;
 195         status = "okay";
 196 };
 197
 198 &usbphy {
 199         usb1_vbus-supply = <&reg_usb1_vbus>;
 200         status = "okay";
 201 };