arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts

   1 /*
   2  * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 /dts-v1/;
  44 #include "sun6i-a31.dtsi"
  45 #include "sunxi-common-regulators.dtsi"
  46
  47 #include <dt-bindings/gpio/gpio.h>
  48 #include <dt-bindings/pinctrl/sun4i-a10.h>
  49
  50 / {
  51         model = "Mele A1000G Quad top set box";
  52         compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
  53
  54         aliases {
  55                 serial0 = &uart0;
  56         };
  57
  58         chosen {
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         leds {
  63                 compatible = "gpio-leds";
  64                 pinctrl-names = "default";
  65                 pinctrl-0 = <&led_pins_m9>;
  66
  67                 blue {
  68                         label = "m9:blue:usr";
  69                         gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
  70                 };
  71         };
  72 };
  73
  74 &ehci0 {
  75         status = "okay";
  76 };
  77
  78 &ehci1 {
  79         status = "okay";
  80 };
  81
  82 &gmac {
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&gmac_pins_mii_a>;
  85         phy = <&phy1>;
  86         phy-mode = "mii";
  87         status = "okay";
  88
  89         phy1: ethernet-phy@1 {
  90                 reg = <1>;
  91         };
  92 };
  93
  94 &ir {
  95         pinctrl-names = "default";
  96         pinctrl-0 = <&ir_pins_a>;
  97         status = "okay";
  98 };
  99
 100 &mmc0 {
 101         pinctrl-names = "default";
 102         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 103         vmmc-supply = <&reg_vcc3v3>;
 104         bus-width = <4>;
 105         cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 106         cd-inverted;
 107         status = "okay";
 108 };
 109
 110 &pio {
 111         led_pins_m9: led_pins@0 {
 112                 allwinner,pins = "PH13";
 113                 allwinner,function = "gpio_out";
 114                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 115                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 116         };
 117
 118         mmc0_cd_pin_m9: mmc0_cd_pin@0 {
 119                 allwinner,pins = "PH22";
 120                 allwinner,function = "gpio_in";
 121                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 122                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 123         };
 124
 125         usb1_vbus_pin_m9: usb1_vbus_pin@0 {
 126                 allwinner,pins = "PC27";
 127                 allwinner,function = "gpio_out";
 128                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 129                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 130         };
 131 };
 132
 133 &reg_usb1_vbus {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&usb1_vbus_pin_m9>;
 136         gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 137         status = "okay";
 138 };
 139
 140 &uart0 {
 141         pinctrl-names = "default";
 142         pinctrl-0 = <&uart0_pins_a>;
 143         status = "okay";
 144 };
 145
 146 &usb_otg {
 147         dr_mode = "host";
 148         status = "okay";
 149 };
 150
 151 &usbphy {
 152         usb1_vbus-supply = <&reg_usb1_vbus>;
 153         status = "okay";
 154 };