arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts

   1 /*
   2  * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 /dts-v1/;
  44 #include "sun7i-a20.dtsi"
  45 #include "sunxi-common-regulators.dtsi"
  46
  47 #include <dt-bindings/gpio/gpio.h>
  48 #include <dt-bindings/input/input.h>
  49 #include <dt-bindings/interrupt-controller/irq.h>
  50
  51 / {
  52         model = "Wits Pro A20 DKT";
  53         compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
  54
  55         aliases {
  56                 serial0 = &uart0;
  57         };
  58
  59         chosen {
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         mmc3_pwrseq: mmc3_pwrseq {
  64                 compatible = "mmc-pwrseq-simple";
  65                 pinctrl-names = "default";
  66                 pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
  67                 reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
  68         };
  69 };
  70
  71 &cpu0 {
  72         cpu-supply = <&reg_dcdc2>;
  73 };
  74
  75 &ehci0 {
  76         status = "okay";
  77 };
  78
  79 &ehci1 {
  80         status = "okay";
  81 };
  82
  83 &gmac {
  84         pinctrl-names = "default";
  85         pinctrl-0 = <&gmac_pins_rgmii_a>;
  86         phy = <&phy1>;
  87         phy-mode = "rgmii";
  88         status = "okay";
  89
  90         phy1: ethernet-phy@1 {
  91                 reg = <1>;
  92         };
  93 };
  94
  95 &i2c0 {
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&i2c0_pins_a>;
  98         status = "okay";
  99
 100         axp209: pmic@34 {
 101                 reg = <0x34>;
 102                 interrupt-parent = <&nmi_intc>;
 103                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 104         };
 105 };
 106
 107 &i2c1 {
 108         pinctrl-names = "default";
 109         pinctrl-0 = <&i2c1_pins_a>;
 110         status = "okay";
 111 };
 112
 113 &i2c2 {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&i2c2_pins_a>;
 116         status = "okay";
 117 };
 118
 119 #include "axp209.dtsi"
 120
 121 &mmc0 {
 122         pinctrl-names = "default";
 123         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 124         vmmc-supply = <&reg_vcc3v3>;
 125         bus-width = <4>;
 126         cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 127         cd-inverted;
 128         status = "okay";
 129 };
 130
 131 &mmc3 {
 132         pinctrl-names = "default";
 133         pinctrl-0 = <&mmc3_pins_a>;
 134         vmmc-supply = <&reg_vcc3v3>;
 135         mmc-pwrseq = <&mmc3_pwrseq>;
 136         bus-width = <4>;
 137         non-removable;
 138         status = "okay";
 139
 140         brcmf: bcrmf@1 {
 141                 reg = <1>;
 142                 compatible = "brcm,bcm4329-fmac";
 143                 interrupt-parent = <&pio>;
 144                 interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
 145                 interrupt-names = "host-wake";
 146         };
 147 };
 148
 149 &ohci0 {
 150         status = "okay";
 151 };
 152
 153 &ohci1 {
 154         status = "okay";
 155 };
 156
 157 &otg_sram {
 158         status = "okay";
 159 };
 160
 161 &pio {
 162         vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
 163                 allwinner,pins = "PH9";
 164                 allwinner,function = "gpio_out";
 165                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 166                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 167         };
 168
 169         usb0_id_detect_pin: usb0_id_detect_pin@0 {
 170                 allwinner,pins = "PH4";
 171                 allwinner,function = "gpio_in";
 172                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 173                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 174         };
 175 };
 176
 177 &reg_dcdc2 {
 178         regulator-always-on;
 179         regulator-min-microvolt = <1000000>;
 180         regulator-max-microvolt = <1450000>;
 181         regulator-name = "vdd-cpu";
 182 };
 183
 184 &reg_dcdc3 {
 185         regulator-always-on;
 186         regulator-min-microvolt = <1000000>;
 187         regulator-max-microvolt = <1400000>;
 188         regulator-name = "vdd-int-dll";
 189 };
 190
 191 &reg_ldo1 {
 192         regulator-name = "vdd-rtc";
 193 };
 194
 195 &reg_ldo2 {
 196         regulator-always-on;
 197         regulator-min-microvolt = <3000000>;
 198         regulator-max-microvolt = <3000000>;
 199         regulator-name = "avcc";
 200 };
 201
 202 &reg_usb0_vbus {
 203         status = "okay";
 204 };
 205
 206 &reg_usb1_vbus {
 207         status = "okay";
 208 };
 209
 210 &reg_usb2_vbus {
 211         status = "okay";
 212 };
 213
 214 &uart0 {
 215         pinctrl-names = "default";
 216         pinctrl-0 = <&uart0_pins_a>;
 217         status = "okay";
 218 };
 219
 220 &usb_otg {
 221         dr_mode = "otg";
 222         status = "okay";
 223 };
 224
 225 &usb_power_supply {
 226         status = "okay";
 227 };
 228
 229 &usbphy {
 230         pinctrl-names = "default";
 231         pinctrl-0 = <&usb0_id_detect_pin>;
 232         usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 233         usb0_vbus_power-supply = <&usb_power_supply>;
 234         usb0_vbus-supply = <&reg_usb0_vbus>;
 235         usb1_vbus-supply = <&reg_usb1_vbus>;
 236         usb2_vbus-supply = <&reg_usb2_vbus>;
 237         status = "okay";
 238 };