arch/arm/boot/dts/sun8i-v3s.dtsi

   1 /*
   2  * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include <dt-bindings/interrupt-controller/arm-gic.h>
  44 #include <dt-bindings/clock/sun8i-v3s-ccu.h>
  45 #include <dt-bindings/reset/sun8i-v3s-ccu.h>
  46
  47 / {
  48         #address-cells = <1>;
  49         #size-cells = <1>;
  50         interrupt-parent = <&gic>;
  51
  52         cpus {
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55
  56                 cpu@0 {
  57                         compatible = "arm,cortex-a7";
  58                         device_type = "cpu";
  59                         reg = <0>;
  60                         clocks = <&ccu CLK_CPU>;
  61                 };
  62         };
  63
  64         de: display-engine {
  65                 compatible = "allwinner,sun8i-v3s-display-engine";
  66                 allwinner,pipelines = <&mixer0>;
  67                 status = "disabled";
  68         };
  69
  70         timer {
  71                 compatible = "arm,armv7-timer";
  72                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  73                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  74                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  75                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
  76         };
  77
  78         clocks {
  79                 #address-cells = <1>;
  80                 #size-cells = <1>;
  81                 ranges;
  82
  83                 osc24M: osc24M_clk {
  84                         #clock-cells = <0>;
  85                         compatible = "fixed-clock";
  86                         clock-frequency = <24000000>;
  87                         clock-accuracy = <50000>;
  88                         clock-output-names = "osc24M";
  89                 };
  90
  91                 osc32k: osc32k_clk {
  92                         #clock-cells = <0>;
  93                         compatible = "fixed-clock";
  94                         clock-frequency = <32768>;
  95                         clock-accuracy = <50000>;
  96                         clock-output-names = "ext-osc32k";
  97                 };
  98         };
  99
 100         soc {
 101                 compatible = "simple-bus";
 102                 #address-cells = <1>;
 103                 #size-cells = <1>;
 104                 ranges;
 105
 106                 display_clocks: clock@1000000 {
 107                         compatible = "allwinner,sun8i-v3s-de2-clk";
 108                         reg = <0x01000000 0x100000>;
 109                         clocks = <&ccu CLK_DE>,
 110                                  <&ccu CLK_BUS_DE>;
 111                         clock-names = "mod",
 112                                       "bus";
 113                         resets = <&ccu RST_BUS_DE>;
 114                         #clock-cells = <1>;
 115                         #reset-cells = <1>;
 116                 };
 117
 118                 mixer0: mixer@1100000 {
 119                         compatible = "allwinner,sun8i-v3s-de2-mixer";
 120                         reg = <0x01100000 0x100000>;
 121                         clocks = <&display_clocks 0>,
 122                                  <&display_clocks 6>;
 123                         clock-names = "bus",
 124                                       "mod";
 125                         resets = <&display_clocks 0>;
 126                         assigned-clocks = <&display_clocks 6>;
 127                         assigned-clock-rates = <150000000>;
 128
 129                         ports {
 130                                 #address-cells = <1>;
 131                                 #size-cells = <0>;
 132
 133                                 mixer0_out: port@1 {
 134                                         reg = <1>;
 135
 136                                         mixer0_out_tcon0: endpoint {
 137                                                 remote-endpoint = <&tcon0_in_mixer0>;
 138                                         };
 139                                 };
 140                         };
 141                 };
 142
 143                 tcon0: lcd-controller@1c0c000 {
 144                         compatible = "allwinner,sun8i-v3s-tcon";
 145                         reg = <0x01c0c000 0x1000>;
 146                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 147                         clocks = <&ccu CLK_BUS_TCON0>,
 148                                  <&ccu CLK_TCON0>;
 149                         clock-names = "ahb",
 150                                       "tcon-ch0";
 151                         clock-output-names = "tcon-pixel-clock";
 152                         #clock-cells = <0>;
 153                         resets = <&ccu RST_BUS_TCON0>;
 154                         reset-names = "lcd";
 155                         status = "disabled";
 156
 157                         ports {
 158                                 #address-cells = <1>;
 159                                 #size-cells = <0>;
 160
 161                                 tcon0_in: port@0 {
 162                                         reg = <0>;
 163
 164                                         tcon0_in_mixer0: endpoint {
 165                                                 remote-endpoint = <&mixer0_out_tcon0>;
 166                                         };
 167                                 };
 168
 169                                 tcon0_out: port@1 {
 170                                         #address-cells = <1>;
 171                                         #size-cells = <0>;
 172                                         reg = <1>;
 173                                 };
 174                         };
 175                 };
 176
 177
 178                 mmc0: mmc@1c0f000 {
 179                         compatible = "allwinner,sun7i-a20-mmc";
 180                         reg = <0x01c0f000 0x1000>;
 181                         clocks = <&ccu CLK_BUS_MMC0>,
 182                                  <&ccu CLK_MMC0>,
 183                                  <&ccu CLK_MMC0_OUTPUT>,
 184                                  <&ccu CLK_MMC0_SAMPLE>;
 185                         clock-names = "ahb",
 186                                       "mmc",
 187                                       "output",
 188                                       "sample";
 189                         resets = <&ccu RST_BUS_MMC0>;
 190                         reset-names = "ahb";
 191                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 192                         pinctrl-names = "default";
 193                         pinctrl-0 = <&mmc0_pins>;
 194                         status = "disabled";
 195                         #address-cells = <1>;
 196                         #size-cells = <0>;
 197                 };
 198
 199                 mmc1: mmc@1c10000 {
 200                         compatible = "allwinner,sun7i-a20-mmc";
 201                         reg = <0x01c10000 0x1000>;
 202                         clocks = <&ccu CLK_BUS_MMC1>,
 203                                  <&ccu CLK_MMC1>,
 204                                  <&ccu CLK_MMC1_OUTPUT>,
 205                                  <&ccu CLK_MMC1_SAMPLE>;
 206                         clock-names = "ahb",
 207                                       "mmc",
 208                                       "output",
 209                                       "sample";
 210                         resets = <&ccu RST_BUS_MMC1>;
 211                         reset-names = "ahb";
 212                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 213                         pinctrl-names = "default";
 214                         pinctrl-0 = <&mmc1_pins>;
 215                         status = "disabled";
 216                         #address-cells = <1>;
 217                         #size-cells = <0>;
 218                 };
 219
 220                 mmc2: mmc@1c11000 {
 221                         compatible = "allwinner,sun7i-a20-mmc";
 222                         reg = <0x01c11000 0x1000>;
 223                         clocks = <&ccu CLK_BUS_MMC2>,
 224                                  <&ccu CLK_MMC2>,
 225                                  <&ccu CLK_MMC2_OUTPUT>,
 226                                  <&ccu CLK_MMC2_SAMPLE>;
 227                         clock-names = "ahb",
 228                                       "mmc",
 229                                       "output",
 230                                       "sample";
 231                         resets = <&ccu RST_BUS_MMC2>;
 232                         reset-names = "ahb";
 233                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 234                         status = "disabled";
 235                         #address-cells = <1>;
 236                         #size-cells = <0>;
 237                 };
 238
 239                 usb_otg: usb@1c19000 {
 240                         compatible = "allwinner,sun8i-h3-musb";
 241                         reg = <0x01c19000 0x0400>;
 242                         clocks = <&ccu CLK_BUS_OTG>;
 243                         resets = <&ccu RST_BUS_OTG>;
 244                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 245                         interrupt-names = "mc";
 246                         phys = <&usbphy 0>;
 247                         phy-names = "usb";
 248                         extcon = <&usbphy 0>;
 249                         status = "disabled";
 250                 };
 251
 252                 usbphy: phy@1c19400 {
 253                         compatible = "allwinner,sun8i-v3s-usb-phy";
 254                         reg = <0x01c19400 0x2c>,
 255                               <0x01c1a800 0x4>;
 256                         reg-names = "phy_ctrl",
 257                                     "pmu0";
 258                         clocks = <&ccu CLK_USB_PHY0>;
 259                         clock-names = "usb0_phy";
 260                         resets = <&ccu RST_USB_PHY0>;
 261                         reset-names = "usb0_reset";
 262                         status = "disabled";
 263                         #phy-cells = <1>;
 264                 };
 265
 266                 ccu: clock@1c20000 {
 267                         compatible = "allwinner,sun8i-v3s-ccu";
 268                         reg = <0x01c20000 0x400>;
 269                         clocks = <&osc24M>, <&rtc 0>;
 270                         clock-names = "hosc", "losc";
 271                         #clock-cells = <1>;
 272                         #reset-cells = <1>;
 273                 };
 274
 275                 rtc: rtc@1c20400 {
 276                         #clock-cells = <1>;
 277                         compatible = "allwinner,sun8i-v3-rtc";
 278                         reg = <0x01c20400 0x54>;
 279                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 280                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 281                         clocks = <&osc32k>;
 282                         clock-output-names = "osc32k", "osc32k-out";
 283                 };
 284
 285                 pio: pinctrl@1c20800 {
 286                         compatible = "allwinner,sun8i-v3s-pinctrl";
 287                         reg = <0x01c20800 0x400>;
 288                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 289                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 290                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 291                         clock-names = "apb", "hosc", "losc";
 292                         gpio-controller;
 293                         #gpio-cells = <3>;
 294                         interrupt-controller;
 295                         #interrupt-cells = <3>;
 296
 297                         i2c0_pins: i2c0-pins {
 298                                 pins = "PB6", "PB7";
 299                                 function = "i2c0";
 300                         };
 301
 302                         uart0_pb_pins: uart0-pb-pins {
 303                                 pins = "PB8", "PB9";
 304                                 function = "uart0";
 305                         };
 306
 307                         mmc0_pins: mmc0-pins {
 308                                 pins = "PF0", "PF1", "PF2", "PF3",
 309                                        "PF4", "PF5";
 310                                 function = "mmc0";
 311                                 drive-strength = <30>;
 312                                 bias-pull-up;
 313                         };
 314
 315                         mmc1_pins: mmc1-pins {
 316                                 pins = "PG0", "PG1", "PG2", "PG3",
 317                                        "PG4", "PG5";
 318                                 function = "mmc1";
 319                                 drive-strength = <30>;
 320                                 bias-pull-up;
 321                         };
 322
 323                         spi0_pins: spi0-pins {
 324                                 pins = "PC0", "PC1", "PC2", "PC3";
 325                                 function = "spi0";
 326                         };
 327                 };
 328
 329                 timer@1c20c00 {
 330                         compatible = "allwinner,sun4i-a10-timer";
 331                         reg = <0x01c20c00 0xa0>;
 332                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 333                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 334                         clocks = <&osc24M>;
 335                 };
 336
 337                 wdt0: watchdog@1c20ca0 {
 338                         compatible = "allwinner,sun6i-a31-wdt";
 339                         reg = <0x01c20ca0 0x20>;
 340                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 341                 };
 342
 343                 lradc: lradc@1c22800 {
 344                         compatible = "allwinner,sun4i-a10-lradc-keys";
 345                         reg = <0x01c22800 0x400>;
 346                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 347                         status = "disabled";
 348                 };
 349
 350                 uart0: serial@1c28000 {
 351                         compatible = "snps,dw-apb-uart";
 352                         reg = <0x01c28000 0x400>;
 353                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 354                         reg-shift = <2>;
 355                         reg-io-width = <4>;
 356                         clocks = <&ccu CLK_BUS_UART0>;
 357                         resets = <&ccu RST_BUS_UART0>;
 358                         status = "disabled";
 359                 };
 360
 361                 uart1: serial@1c28400 {
 362                         compatible = "snps,dw-apb-uart";
 363                         reg = <0x01c28400 0x400>;
 364                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 365                         reg-shift = <2>;
 366                         reg-io-width = <4>;
 367                         clocks = <&ccu CLK_BUS_UART1>;
 368                         resets = <&ccu RST_BUS_UART1>;
 369                         status = "disabled";
 370                 };
 371
 372                 uart2: serial@1c28800 {
 373                         compatible = "snps,dw-apb-uart";
 374                         reg = <0x01c28800 0x400>;
 375                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 376                         reg-shift = <2>;
 377                         reg-io-width = <4>;
 378                         clocks = <&ccu CLK_BUS_UART2>;
 379                         resets = <&ccu RST_BUS_UART2>;
 380                         status = "disabled";
 381                 };
 382
 383                 i2c0: i2c@1c2ac00 {
 384                         compatible = "allwinner,sun6i-a31-i2c";
 385                         reg = <0x01c2ac00 0x400>;
 386                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 387                         clocks = <&ccu CLK_BUS_I2C0>;
 388                         resets = <&ccu RST_BUS_I2C0>;
 389                         pinctrl-names = "default";
 390                         pinctrl-0 = <&i2c0_pins>;
 391                         status = "disabled";
 392                         #address-cells = <1>;
 393                         #size-cells = <0>;
 394                 };
 395
 396                 i2c1: i2c@1c2b000 {
 397                         compatible = "allwinner,sun6i-a31-i2c";
 398                         reg = <0x01c2b000 0x400>;
 399                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 400                         clocks = <&ccu CLK_BUS_I2C1>;
 401                         resets = <&ccu RST_BUS_I2C1>;
 402                         status = "disabled";
 403                         #address-cells = <1>;
 404                         #size-cells = <0>;
 405                 };
 406
 407                 spi0: spi@1c68000 {
 408                         compatible = "allwinner,sun8i-h3-spi";
 409                         reg = <0x01c68000 0x1000>;
 410                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 411                         clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 412                         clock-names = "ahb", "mod";
 413                         pinctrl-names = "default";
 414                         pinctrl-0 = <&spi0_pins>;
 415                         resets = <&ccu RST_BUS_SPI0>;
 416                         status = "disabled";
 417                         #address-cells = <1>;
 418                         #size-cells = <0>;
 419                 };
 420
 421                 gic: interrupt-controller@1c81000 {
 422                         compatible = "arm,gic-400";
 423                         reg = <0x01c81000 0x1000>,
 424                               <0x01c82000 0x1000>,
 425                               <0x01c84000 0x2000>,
 426                               <0x01c86000 0x2000>;
 427                         interrupt-controller;
 428                         #interrupt-cells = <3>;
 429                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 430                 };
 431         };
 432 };