]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - arch/arm/boot/dts/tny_a9263.dts
Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
[mirror_ubuntu-artful-kernel.git] / arch / arm / boot / dts / tny_a9263.dts
1 /*
2 * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
3 *
4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2 only
7 */
8 /dts-v1/;
9 #include "at91sam9263.dtsi"
10
11 / {
12 model = "Calao TNY A9263";
13 compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
14
15 chosen {
16 bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
17 };
18
19 memory {
20 reg = <0x20000000 0x4000000>;
21 };
22
23 clocks {
24 #address-cells = <1>;
25 #size-cells = <1>;
26 ranges;
27
28 main_clock: clock@0 {
29 compatible = "atmel,osc", "fixed-clock";
30 clock-frequency = <12000000>;
31 };
32
33 slow_xtal {
34 clock-frequency = <32768>;
35 };
36
37 main_xtal {
38 clock-frequency = <12000000>;
39 };
40 };
41
42 ahb {
43 apb {
44 dbgu: serial@ffffee00 {
45 status = "okay";
46 };
47
48 usb1: gadget@fff78000 {
49 atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
50 status = "okay";
51 };
52 };
53
54 nand0: nand@40000000 {
55 nand-bus-width = <8>;
56 nand-ecc-mode = "soft";
57 nand-on-flash-bbt;
58 status = "okay";
59
60 at91bootstrap@0 {
61 label = "at91bootstrap";
62 reg = <0x0 0x20000>;
63 };
64
65 barebox@20000 {
66 label = "barebox";
67 reg = <0x20000 0x40000>;
68 };
69
70 bareboxenv@60000 {
71 label = "bareboxenv";
72 reg = <0x60000 0x20000>;
73 };
74
75 bareboxenv2@80000 {
76 label = "bareboxenv2";
77 reg = <0x80000 0x20000>;
78 };
79
80 oftree@80000 {
81 label = "oftree";
82 reg = <0xa0000 0x20000>;
83 };
84
85 kernel@a0000 {
86 label = "kernel";
87 reg = <0xc0000 0x400000>;
88 };
89
90 rootfs@4a0000 {
91 label = "rootfs";
92 reg = <0x4c0000 0x7800000>;
93 };
94
95 data@7ca0000 {
96 label = "data";
97 reg = <0x7cc0000 0x8340000>;
98 };
99 };
100 };
101
102 i2c@0 {
103 status = "okay";
104 };
105 };