arch/arm/boot/dts/vfxxx.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License as published by
   6  * the Free Software Foundation; either version 2 of the License, or
   7  * (at your option) any later version.
   8  */
   9
  10 #include "vf610-pinfunc.h"
  11 #include <dt-bindings/clock/vf610-clock.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         aliases {
  17                 can0 = &can0;
  18                 can1 = &can1;
  19                 serial0 = &uart0;
  20                 serial1 = &uart1;
  21                 serial2 = &uart2;
  22                 serial3 = &uart3;
  23                 serial4 = &uart4;
  24                 serial5 = &uart5;
  25                 gpio0 = &gpio0;
  26                 gpio1 = &gpio1;
  27                 gpio2 = &gpio2;
  28                 gpio3 = &gpio3;
  29                 gpio4 = &gpio4;
  30                 usbphy0 = &usbphy0;
  31                 usbphy1 = &usbphy1;
  32         };
  33
  34         fxosc: fxosc {
  35                 compatible = "fixed-clock";
  36                 #clock-cells = <0>;
  37                 clock-frequency = <24000000>;
  38         };
  39
  40         sxosc: sxosc {
  41                 compatible = "fixed-clock";
  42                 #clock-cells = <0>;
  43                 clock-frequency = <32768>;
  44         };
  45
  46         reboot: syscon-reboot {
  47                 compatible = "syscon-reboot";
  48                 regmap = <&src>;
  49                 offset = <0x0>;
  50                 mask = <0x1000>;
  51         };
  52
  53         soc {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "simple-bus";
  57                 interrupt-parent = <&mscm_ir>;
  58                 ranges;
  59
  60                 aips0: aips-bus@40000000 {
  61                         compatible = "fsl,aips-bus", "simple-bus";
  62                         #address-cells = <1>;
  63                         #size-cells = <1>;
  64                         ranges;
  65
  66                         mscm_cpucfg: cpucfg@40001000 {
  67                                 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
  68                                 reg = <0x40001000 0x800>;
  69                         };
  70
  71                         mscm_ir: interrupt-controller@40001800 {
  72                                 compatible = "fsl,vf610-mscm-ir";
  73                                 reg = <0x40001800 0x400>;
  74                                 fsl,cpucfg = <&mscm_cpucfg>;
  75                                 interrupt-controller;
  76                                 #interrupt-cells = <2>;
  77                         };
  78
  79                         edma0: dma-controller@40018000 {
  80                                 #dma-cells = <2>;
  81                                 compatible = "fsl,vf610-edma";
  82                                 reg = <0x40018000 0x2000>,
  83                                         <0x40024000 0x1000>,
  84                                         <0x40025000 0x1000>;
  85                                 dma-channels = <32>;
  86                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
  87                                                 <9 IRQ_TYPE_LEVEL_HIGH>;
  88                                 interrupt-names = "edma-tx", "edma-err";
  89                                 clock-names = "dmamux0", "dmamux1";
  90                                 clocks = <&clks VF610_CLK_DMAMUX0>,
  91                                         <&clks VF610_CLK_DMAMUX1>;
  92                                 status = "disabled";
  93                         };
  94
  95                         can0: flexcan@40020000 {
  96                                 compatible = "fsl,vf610-flexcan";
  97                                 reg = <0x40020000 0x4000>;
  98                                 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
  99                                 clocks = <&clks VF610_CLK_FLEXCAN0>,
 100                                          <&clks VF610_CLK_FLEXCAN0>;
 101                                 clock-names = "ipg", "per";
 102                                 status = "disabled";
 103                         };
 104
 105                         uart0: serial@40027000 {
 106                                 compatible = "fsl,vf610-lpuart";
 107                                 reg = <0x40027000 0x1000>;
 108                                 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 109                                 clocks = <&clks VF610_CLK_UART0>;
 110                                 clock-names = "ipg";
 111                                 dmas = <&edma0 0 2>,
 112                                         <&edma0 0 3>;
 113                                 dma-names = "rx","tx";
 114                                 status = "disabled";
 115                         };
 116
 117                         uart1: serial@40028000 {
 118                                 compatible = "fsl,vf610-lpuart";
 119                                 reg = <0x40028000 0x1000>;
 120                                 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 121                                 clocks = <&clks VF610_CLK_UART1>;
 122                                 clock-names = "ipg";
 123                                 dmas = <&edma0 0 4>,
 124                                         <&edma0 0 5>;
 125                                 dma-names = "rx","tx";
 126                                 status = "disabled";
 127                         };
 128
 129                         uart2: serial@40029000 {
 130                                 compatible = "fsl,vf610-lpuart";
 131                                 reg = <0x40029000 0x1000>;
 132                                 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 133                                 clocks = <&clks VF610_CLK_UART2>;
 134                                 clock-names = "ipg";
 135                                 dmas = <&edma0 0 6>,
 136                                         <&edma0 0 7>;
 137                                 dma-names = "rx","tx";
 138                                 status = "disabled";
 139                         };
 140
 141                         uart3: serial@4002a000 {
 142                                 compatible = "fsl,vf610-lpuart";
 143                                 reg = <0x4002a000 0x1000>;
 144                                 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 145                                 clocks = <&clks VF610_CLK_UART3>;
 146                                 clock-names = "ipg";
 147                                 dmas = <&edma0 0 8>,
 148                                         <&edma0 0 9>;
 149                                 dma-names = "rx","tx";
 150                                 status = "disabled";
 151                         };
 152
 153                         dspi0: dspi0@4002c000 {
 154                                 #address-cells = <1>;
 155                                 #size-cells = <0>;
 156                                 compatible = "fsl,vf610-dspi";
 157                                 reg = <0x4002c000 0x1000>;
 158                                 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 159                                 clocks = <&clks VF610_CLK_DSPI0>;
 160                                 clock-names = "dspi";
 161                                 spi-num-chipselects = <5>;
 162                                 status = "disabled";
 163                         };
 164
 165                         dspi1: dspi1@4002d000 {
 166                                 #address-cells = <1>;
 167                                 #size-cells = <0>;
 168                                 compatible = "fsl,vf610-dspi";
 169                                 reg = <0x4002d000 0x1000>;
 170                                 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 171                                 clocks = <&clks VF610_CLK_DSPI1>;
 172                                 clock-names = "dspi";
 173                                 spi-num-chipselects = <5>;
 174                                 status = "disabled";
 175                         };
 176
 177                         sai2: sai@40031000 {
 178                                 compatible = "fsl,vf610-sai";
 179                                 reg = <0x40031000 0x1000>;
 180                                 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
 181                                 clocks = <&clks VF610_CLK_SAI2>;
 182                                 clock-names = "sai";
 183                                 dma-names = "tx", "rx";
 184                                 dmas = <&edma0 0 21>,
 185                                         <&edma0 0 20>;
 186                                 status = "disabled";
 187                         };
 188
 189                         pit: pit@40037000 {
 190                                 compatible = "fsl,vf610-pit";
 191                                 reg = <0x40037000 0x1000>;
 192                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 193                                 clocks = <&clks VF610_CLK_PIT>;
 194                                 clock-names = "pit";
 195                         };
 196
 197                         pwm0: pwm@40038000 {
 198                                 compatible = "fsl,vf610-ftm-pwm";
 199                                 #pwm-cells = <3>;
 200                                 reg = <0x40038000 0x1000>;
 201                                 clock-names = "ftm_sys", "ftm_ext",
 202                                               "ftm_fix", "ftm_cnt_clk_en";
 203                                 clocks = <&clks VF610_CLK_FTM0>,
 204                                         <&clks VF610_CLK_FTM0_EXT_SEL>,
 205                                         <&clks VF610_CLK_FTM0_FIX_SEL>,
 206                                         <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 207                                 status = "disabled";
 208                         };
 209
 210                         pwm1: pwm@40039000 {
 211                                 compatible = "fsl,vf610-ftm-pwm";
 212                                 #pwm-cells = <3>;
 213                                 reg = <0x40039000 0x1000>;
 214                                 clock-names = "ftm_sys", "ftm_ext",
 215                                               "ftm_fix", "ftm_cnt_clk_en";
 216                                 clocks = <&clks VF610_CLK_FTM1>,
 217                                         <&clks VF610_CLK_FTM1_EXT_SEL>,
 218                                         <&clks VF610_CLK_FTM1_FIX_SEL>,
 219                                         <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
 220                                 status = "disabled";
 221                         };
 222
 223                         adc0: adc@4003b000 {
 224                                 compatible = "fsl,vf610-adc";
 225                                 reg = <0x4003b000 0x1000>;
 226                                 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
 227                                 clocks = <&clks VF610_CLK_ADC0>;
 228                                 clock-names = "adc";
 229                                 #io-channel-cells = <1>;
 230                                 status = "disabled";
 231                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 232                                                         <20000000>;
 233                         };
 234
 235                         wdoga5: wdog@4003e000 {
 236                                 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 237                                 reg = <0x4003e000 0x1000>;
 238                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 239                                 clocks = <&clks VF610_CLK_WDT>;
 240                                 clock-names = "wdog";
 241                                 status = "disabled";
 242                         };
 243
 244                         qspi0: quadspi@40044000 {
 245                                 #address-cells = <1>;
 246                                 #size-cells = <0>;
 247                                 compatible = "fsl,vf610-qspi";
 248                                 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
 249                                 reg-names = "QuadSPI", "QuadSPI-memory";
 250                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 251                                 clocks = <&clks VF610_CLK_QSPI0_EN>,
 252                                         <&clks VF610_CLK_QSPI0>;
 253                                 clock-names = "qspi_en", "qspi";
 254                                 status = "disabled";
 255                         };
 256
 257                         iomuxc: iomuxc@40048000 {
 258                                 compatible = "fsl,vf610-iomuxc";
 259                                 reg = <0x40048000 0x1000>;
 260                         };
 261
 262                         gpio0: gpio@40049000 {
 263                                 compatible = "fsl,vf610-gpio";
 264                                 reg = <0x40049000 0x1000 0x400ff000 0x40>;
 265                                 gpio-controller;
 266                                 #gpio-cells = <2>;
 267                                 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 268                                 interrupt-controller;
 269                                 #interrupt-cells = <2>;
 270                                 gpio-ranges = <&iomuxc 0 0 32>;
 271                         };
 272
 273                         gpio1: gpio@4004a000 {
 274                                 compatible = "fsl,vf610-gpio";
 275                                 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
 276                                 gpio-controller;
 277                                 #gpio-cells = <2>;
 278                                 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
 279                                 interrupt-controller;
 280                                 #interrupt-cells = <2>;
 281                                 gpio-ranges = <&iomuxc 0 32 32>;
 282                         };
 283
 284                         gpio2: gpio@4004b000 {
 285                                 compatible = "fsl,vf610-gpio";
 286                                 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
 287                                 gpio-controller;
 288                                 #gpio-cells = <2>;
 289                                 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 290                                 interrupt-controller;
 291                                 #interrupt-cells = <2>;
 292                                 gpio-ranges = <&iomuxc 0 64 32>;
 293                         };
 294
 295                         gpio3: gpio@4004c000 {
 296                                 compatible = "fsl,vf610-gpio";
 297                                 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
 298                                 gpio-controller;
 299                                 #gpio-cells = <2>;
 300                                 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
 301                                 interrupt-controller;
 302                                 #interrupt-cells = <2>;
 303                                 gpio-ranges = <&iomuxc 0 96 32>;
 304                         };
 305
 306                         gpio4: gpio@4004d000 {
 307                                 compatible = "fsl,vf610-gpio";
 308                                 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
 309                                 gpio-controller;
 310                                 #gpio-cells = <2>;
 311                                 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
 312                                 interrupt-controller;
 313                                 #interrupt-cells = <2>;
 314                                 gpio-ranges = <&iomuxc 0 128 7>;
 315                         };
 316
 317                         anatop: anatop@40050000 {
 318                                 compatible = "fsl,vf610-anatop", "syscon";
 319                                 reg = <0x40050000 0x400>;
 320                         };
 321
 322                         usbphy0: usbphy@40050800 {
 323                                 compatible = "fsl,vf610-usbphy";
 324                                 reg = <0x40050800 0x400>;
 325                                 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
 326                                 clocks = <&clks VF610_CLK_USBPHY0>;
 327                                 fsl,anatop = <&anatop>;
 328                                 status = "disabled";
 329                         };
 330
 331                         usbphy1: usbphy@40050c00 {
 332                                 compatible = "fsl,vf610-usbphy";
 333                                 reg = <0x40050c00 0x400>;
 334                                 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
 335                                 clocks = <&clks VF610_CLK_USBPHY1>;
 336                                 fsl,anatop = <&anatop>;
 337                                 status = "disabled";
 338                         };
 339
 340                         i2c0: i2c@40066000 {
 341                                 #address-cells = <1>;
 342                                 #size-cells = <0>;
 343                                 compatible = "fsl,vf610-i2c";
 344                                 reg = <0x40066000 0x1000>;
 345                                 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
 346                                 clocks = <&clks VF610_CLK_I2C0>;
 347                                 clock-names = "ipg";
 348                                 dmas = <&edma0 0 50>,
 349                                         <&edma0 0 51>;
 350                                 dma-names = "rx","tx";
 351                                 status = "disabled";
 352                         };
 353
 354                         i2c1: i2c@40067000 {
 355                                 #address-cells = <1>;
 356                                 #size-cells = <0>;
 357                                 compatible = "fsl,vf610-i2c";
 358                                 reg = <0x40067000 0x1000>;
 359                                 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 360                                 clocks = <&clks VF610_CLK_I2C1>;
 361                                 clock-names = "ipg";
 362                                 dmas = <&edma0 0 52>,
 363                                         <&edma0 0 53>;
 364                                 dma-names = "rx","tx";
 365                                 status = "disabled";
 366                         };
 367
 368                         clks: ccm@4006b000 {
 369                                 compatible = "fsl,vf610-ccm";
 370                                 reg = <0x4006b000 0x1000>;
 371                                 clocks = <&sxosc>, <&fxosc>;
 372                                 clock-names = "sxosc", "fxosc";
 373                                 #clock-cells = <1>;
 374                         };
 375
 376                         usbdev0: usb@40034000 {
 377                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 378                                 reg = <0x40034000 0x800>;
 379                                 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 380                                 clocks = <&clks VF610_CLK_USBC0>;
 381                                 fsl,usbphy = <&usbphy0>;
 382                                 fsl,usbmisc = <&usbmisc0 0>;
 383                                 dr_mode = "peripheral";
 384                                 status = "disabled";
 385                         };
 386
 387                         usbmisc0: usb@40034800 {
 388                                 #index-cells = <1>;
 389                                 compatible = "fsl,vf610-usbmisc";
 390                                 reg = <0x40034800 0x200>;
 391                                 clocks = <&clks VF610_CLK_USBC0>;
 392                                 status = "disabled";
 393                         };
 394
 395                         src: src@4006e000 {
 396                                 compatible = "fsl,vf610-src", "syscon";
 397                                 reg = <0x4006e000 0x1000>;
 398                                 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
 399                         };
 400                 };
 401
 402                 aips1: aips-bus@40080000 {
 403                         compatible = "fsl,aips-bus", "simple-bus";
 404                         #address-cells = <1>;
 405                         #size-cells = <1>;
 406                         ranges;
 407
 408                         edma1: dma-controller@40098000 {
 409                                 #dma-cells = <2>;
 410                                 compatible = "fsl,vf610-edma";
 411                                 reg = <0x40098000 0x2000>,
 412                                         <0x400a1000 0x1000>,
 413                                         <0x400a2000 0x1000>;
 414                                 dma-channels = <32>;
 415                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 416                                                 <11 IRQ_TYPE_LEVEL_HIGH>;
 417                                 interrupt-names = "edma-tx", "edma-err";
 418                                 clock-names = "dmamux0", "dmamux1";
 419                                 clocks = <&clks VF610_CLK_DMAMUX2>,
 420                                         <&clks VF610_CLK_DMAMUX3>;
 421                                 status = "disabled";
 422                         };
 423
 424                         snvs0: snvs@400a7000 {
 425                             compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 426                                 reg = <0x400a7000 0x2000>;
 427
 428                                 snvsrtc: snvs-rtc-lp {
 429                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 430                                         regmap = <&snvs0>;
 431                                         offset = <0x34>;
 432                                         interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
 433                                         clocks = <&clks VF610_CLK_SNVS>;
 434                                         clock-names = "snvs-rtc";
 435                                 };
 436                         };
 437
 438                         uart4: serial@400a9000 {
 439                                 compatible = "fsl,vf610-lpuart";
 440                                 reg = <0x400a9000 0x1000>;
 441                                 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
 442                                 clocks = <&clks VF610_CLK_UART4>;
 443                                 clock-names = "ipg";
 444                                 status = "disabled";
 445                         };
 446
 447                         uart5: serial@400aa000 {
 448                                 compatible = "fsl,vf610-lpuart";
 449                                 reg = <0x400aa000 0x1000>;
 450                                 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 451                                 clocks = <&clks VF610_CLK_UART5>;
 452                                 clock-names = "ipg";
 453                                 status = "disabled";
 454                         };
 455
 456                         adc1: adc@400bb000 {
 457                                 compatible = "fsl,vf610-adc";
 458                                 reg = <0x400bb000 0x1000>;
 459                                 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
 460                                 clocks = <&clks VF610_CLK_ADC1>;
 461                                 clock-names = "adc";
 462                                 #io-channel-cells = <1>;
 463                                 status = "disabled";
 464                         };
 465
 466                         esdhc0: esdhc@400b1000 {
 467                                 compatible = "fsl,imx53-esdhc";
 468                                 reg = <0x400b1000 0x1000>;
 469                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 470                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 471                                         <&clks VF610_CLK_PLATFORM_BUS>,
 472                                         <&clks VF610_CLK_ESDHC0>;
 473                                 clock-names = "ipg", "ahb", "per";
 474                                 status = "disabled";
 475                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 476                                                         <20000000>;
 477                         };
 478
 479                         esdhc1: esdhc@400b2000 {
 480                                 compatible = "fsl,imx53-esdhc";
 481                                 reg = <0x400b2000 0x1000>;
 482                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 483                                 clocks = <&clks VF610_CLK_IPG_BUS>,
 484                                         <&clks VF610_CLK_PLATFORM_BUS>,
 485                                         <&clks VF610_CLK_ESDHC1>;
 486                                 clock-names = "ipg", "ahb", "per";
 487                                 status = "disabled";
 488                         };
 489
 490                         usbh1: usb@400b4000 {
 491                                 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
 492                                 reg = <0x400b4000 0x800>;
 493                                 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
 494                                 clocks = <&clks VF610_CLK_USBC1>;
 495                                 fsl,usbphy = <&usbphy1>;
 496                                 fsl,usbmisc = <&usbmisc1 0>;
 497                                 dr_mode = "host";
 498                                 status = "disabled";
 499                         };
 500
 501                         usbmisc1: usb@400b4800 {
 502                                 #index-cells = <1>;
 503                                 compatible = "fsl,vf610-usbmisc";
 504                                 reg = <0x400b4800 0x200>;
 505                                 clocks = <&clks VF610_CLK_USBC1>;
 506                                 status = "disabled";
 507                         };
 508
 509                         ftm: ftm@400b8000 {
 510                                 compatible = "fsl,ftm-timer";
 511                                 reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
 512                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 513                                 clock-names = "ftm-evt", "ftm-src",
 514                                         "ftm-evt-counter-en", "ftm-src-counter-en";
 515                                 clocks = <&clks VF610_CLK_FTM2>,
 516                                         <&clks VF610_CLK_FTM3>,
 517                                         <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
 518                                         <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
 519                                 status = "disabled";
 520                         };
 521
 522                         qspi1: quadspi@400c4000 {
 523                                 #address-cells = <1>;
 524                                 #size-cells = <0>;
 525                                 compatible = "fsl,vf610-qspi";
 526                                 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
 527                                 reg-names = "QuadSPI", "QuadSPI-memory";
 528                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 529                                 clocks = <&clks VF610_CLK_QSPI1_EN>,
 530                                         <&clks VF610_CLK_QSPI1>;
 531                                 clock-names = "qspi_en", "qspi";
 532                                 status = "disabled";
 533                         };
 534
 535                         fec0: ethernet@400d0000 {
 536                                 compatible = "fsl,mvf600-fec";
 537                                 reg = <0x400d0000 0x1000>;
 538                                 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
 539                                 clocks = <&clks VF610_CLK_ENET0>,
 540                                         <&clks VF610_CLK_ENET0>,
 541                                         <&clks VF610_CLK_ENET>;
 542                                 clock-names = "ipg", "ahb", "ptp";
 543                                 status = "disabled";
 544                         };
 545
 546                         fec1: ethernet@400d1000 {
 547                                 compatible = "fsl,mvf600-fec";
 548                                 reg = <0x400d1000 0x1000>;
 549                                 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
 550                                 clocks = <&clks VF610_CLK_ENET1>,
 551                                         <&clks VF610_CLK_ENET1>,
 552                                         <&clks VF610_CLK_ENET>;
 553                                 clock-names = "ipg", "ahb", "ptp";
 554                                 status = "disabled";
 555                         };
 556
 557                         can1: flexcan@400d4000 {
 558                                 compatible = "fsl,vf610-flexcan";
 559                                 reg = <0x400d4000 0x4000>;
 560                                 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
 561                                 clocks = <&clks VF610_CLK_FLEXCAN1>,
 562                                          <&clks VF610_CLK_FLEXCAN1>;
 563                                 clock-names = "ipg", "per";
 564                                 status = "disabled";
 565                         };
 566
 567                         i2c2: i2c@400e6000 {
 568                                 #address-cells = <1>;
 569                                 #size-cells = <0>;
 570                                 compatible = "fsl,vf610-i2c";
 571                                 reg = <0x400e6000 0x1000>;
 572                                 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
 573                                 clocks = <&clks VF610_CLK_I2C2>;
 574                                 clock-names = "ipg";
 575                                 dmas = <&edma0 1 36>,
 576                                         <&edma0 1 37>;
 577                                 dma-names = "rx","tx";
 578                                 status = "disabled";
 579                         };
 580
 581                         i2c3: i2c@400e7000 {
 582                                 #address-cells = <1>;
 583                                 #size-cells = <0>;
 584                                 compatible = "fsl,vf610-i2c";
 585                                 reg = <0x400e7000 0x1000>;
 586                                 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 587                                 clocks = <&clks VF610_CLK_I2C3>;
 588                                 clock-names = "ipg";
 589                                 dmas = <&edma0 1 38>,
 590                                         <&edma0 1 39>;
 591                                 dma-names = "rx","tx";
 592                                 status = "disabled";
 593                         };
 594                 };
 595         };
 596 };