arch/arm/kernel/perf_event_v6.c

   1 /*
   2  * ARMv6 Performance counter handling code.
   3  *
   4  * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
   5  *
   6  * ARMv6 has 2 configurable performance counters and a single cycle counter.
   7  * They all share a single reset bit but can be written to zero so we can use
   8  * that for a reset.
   9  *
  10  * The counters can't be individually enabled or disabled so when we remove
  11  * one event and replace it with another we could get spurious counts from the
  12  * wrong event. However, we can take advantage of the fact that the
  13  * performance counters can export events to the event bus, and the event bus
  14  * itself can be monitored. This requires that we *don't* export the events to
  15  * the event bus. The procedure for disabling a configurable counter is:
  16  *      - change the counter to count the ETMEXTOUT[0] signal (0x20). This
  17  *        effectively stops the counter from counting.
  18  *      - disable the counter's interrupt generation (each counter has it's
  19  *        own interrupt enable bit).
  20  * Once stopped, the counter value can be written as 0 to reset.
  21  *
  22  * To enable a counter:
  23  *      - enable the counter's interrupt generation.
  24  *      - set the new event type.
  25  *
  26  * Note: the dedicated cycle counter only counts cycles and can't be
  27  * enabled/disabled independently of the others. When we want to disable the
  28  * cycle counter, we have to just disable the interrupt reporting and start
  29  * ignoring that counter. When re-enabling, we have to reset the value and
  30  * enable the interrupt.
  31  */
  32
  33 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
  34 enum armv6_perf_types {
  35         ARMV6_PERFCTR_ICACHE_MISS           = 0x0,
  36         ARMV6_PERFCTR_IBUF_STALL            = 0x1,
  37         ARMV6_PERFCTR_DDEP_STALL            = 0x2,
  38         ARMV6_PERFCTR_ITLB_MISS             = 0x3,
  39         ARMV6_PERFCTR_DTLB_MISS             = 0x4,
  40         ARMV6_PERFCTR_BR_EXEC               = 0x5,
  41         ARMV6_PERFCTR_BR_MISPREDICT         = 0x6,
  42         ARMV6_PERFCTR_INSTR_EXEC            = 0x7,
  43         ARMV6_PERFCTR_DCACHE_HIT            = 0x9,
  44         ARMV6_PERFCTR_DCACHE_ACCESS         = 0xA,
  45         ARMV6_PERFCTR_DCACHE_MISS           = 0xB,
  46         ARMV6_PERFCTR_DCACHE_WBACK          = 0xC,
  47         ARMV6_PERFCTR_SW_PC_CHANGE          = 0xD,
  48         ARMV6_PERFCTR_MAIN_TLB_MISS         = 0xF,
  49         ARMV6_PERFCTR_EXPL_D_ACCESS         = 0x10,
  50         ARMV6_PERFCTR_LSU_FULL_STALL        = 0x11,
  51         ARMV6_PERFCTR_WBUF_DRAINED          = 0x12,
  52         ARMV6_PERFCTR_CPU_CYCLES            = 0xFF,
  53         ARMV6_PERFCTR_NOP                   = 0x20,
  54 };
  55
  56 enum armv6_counters {
  57         ARMV6_CYCLE_COUNTER = 0,
  58         ARMV6_COUNTER0,
  59         ARMV6_COUNTER1,
  60 };
  61
  62 /*
  63  * The hardware events that we support. We do support cache operations but
  64  * we have harvard caches and no way to combine instruction and data
  65  * accesses/misses in hardware.
  66  */
  67 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
  68         [PERF_COUNT_HW_CPU_CYCLES]              = ARMV6_PERFCTR_CPU_CYCLES,
  69         [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV6_PERFCTR_INSTR_EXEC,
  70         [PERF_COUNT_HW_CACHE_REFERENCES]        = HW_OP_UNSUPPORTED,
  71         [PERF_COUNT_HW_CACHE_MISSES]            = HW_OP_UNSUPPORTED,
  72         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV6_PERFCTR_BR_EXEC,
  73         [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV6_PERFCTR_BR_MISPREDICT,
  74         [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
  75         [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL,
  76         [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = ARMV6_PERFCTR_LSU_FULL_STALL,
  77 };
  78
  79 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  80                                           [PERF_COUNT_HW_CACHE_OP_MAX]
  81                                           [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
  82         [C(L1D)] = {
  83                 /*
  84                  * The performance counters don't differentiate between read
  85                  * and write accesses/misses so this isn't strictly correct,
  86                  * but it's the best we can do. Writes and reads get
  87                  * combined.
  88                  */
  89                 [C(OP_READ)] = {
  90                         [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
  91                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
  92                 },
  93                 [C(OP_WRITE)] = {
  94                         [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
  95                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
  96                 },
  97                 [C(OP_PREFETCH)] = {
  98                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
  99                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 100                 },
 101         },
 102         [C(L1I)] = {
 103                 [C(OP_READ)] = {
 104                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 105                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
 106                 },
 107                 [C(OP_WRITE)] = {
 108                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 109                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
 110                 },
 111                 [C(OP_PREFETCH)] = {
 112                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 113                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 114                 },
 115         },
 116         [C(LL)] = {
 117                 [C(OP_READ)] = {
 118                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 119                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 120                 },
 121                 [C(OP_WRITE)] = {
 122                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 123                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 124                 },
 125                 [C(OP_PREFETCH)] = {
 126                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 127                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 128                 },
 129         },
 130         [C(DTLB)] = {
 131                 /*
 132                  * The ARM performance counters can count micro DTLB misses,
 133                  * micro ITLB misses and main TLB misses. There isn't an event
 134                  * for TLB misses, so use the micro misses here and if users
 135                  * want the main TLB misses they can use a raw counter.
 136                  */
 137                 [C(OP_READ)] = {
 138                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 139                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
 140                 },
 141                 [C(OP_WRITE)] = {
 142                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 143                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
 144                 },
 145                 [C(OP_PREFETCH)] = {
 146                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 147                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 148                 },
 149         },
 150         [C(ITLB)] = {
 151                 [C(OP_READ)] = {
 152                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 153                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
 154                 },
 155                 [C(OP_WRITE)] = {
 156                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 157                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
 158                 },
 159                 [C(OP_PREFETCH)] = {
 160                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 161                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 162                 },
 163         },
 164         [C(BPU)] = {
 165                 [C(OP_READ)] = {
 166                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 167                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 168                 },
 169                 [C(OP_WRITE)] = {
 170                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 171                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 172                 },
 173                 [C(OP_PREFETCH)] = {
 174                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 175                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 176                 },
 177         },
 178         [C(NODE)] = {
 179                 [C(OP_READ)] = {
 180                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 181                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 182                 },
 183                 [C(OP_WRITE)] = {
 184                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 185                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 186                 },
 187                 [C(OP_PREFETCH)] = {
 188                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
 189                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
 190                 },
 191         },
 192 };
 193
 194 enum armv6mpcore_perf_types {
 195         ARMV6MPCORE_PERFCTR_ICACHE_MISS     = 0x0,
 196         ARMV6MPCORE_PERFCTR_IBUF_STALL      = 0x1,
 197         ARMV6MPCORE_PERFCTR_DDEP_STALL      = 0x2,
 198         ARMV6MPCORE_PERFCTR_ITLB_MISS       = 0x3,
 199         ARMV6MPCORE_PERFCTR_DTLB_MISS       = 0x4,
 200         ARMV6MPCORE_PERFCTR_BR_EXEC         = 0x5,
 201         ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
 202         ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
 203         ARMV6MPCORE_PERFCTR_INSTR_EXEC      = 0x8,
 204         ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
 205         ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
 206         ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
 207         ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
 208         ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
 209         ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
 210         ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
 211         ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
 212         ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
 213         ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
 214         ARMV6MPCORE_PERFCTR_CPU_CYCLES      = 0xFF,
 215 };
 216
 217 /*
 218  * The hardware events that we support. We do support cache operations but
 219  * we have harvard caches and no way to combine instruction and data
 220  * accesses/misses in hardware.
 221  */
 222 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
 223         [PERF_COUNT_HW_CPU_CYCLES]              = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
 224         [PERF_COUNT_HW_INSTRUCTIONS]            = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
 225         [PERF_COUNT_HW_CACHE_REFERENCES]        = HW_OP_UNSUPPORTED,
 226         [PERF_COUNT_HW_CACHE_MISSES]            = HW_OP_UNSUPPORTED,
 227         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = ARMV6MPCORE_PERFCTR_BR_EXEC,
 228         [PERF_COUNT_HW_BRANCH_MISSES]           = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
 229         [PERF_COUNT_HW_BUS_CYCLES]              = HW_OP_UNSUPPORTED,
 230         [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL,
 231         [PERF_COUNT_HW_STALLED_CYCLES_BACKEND]  = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
 232 };
 233
 234 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 235                                         [PERF_COUNT_HW_CACHE_OP_MAX]
 236                                         [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
 237         [C(L1D)] = {
 238                 [C(OP_READ)] = {
 239                         [C(RESULT_ACCESS)]  =
 240                                 ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
 241                         [C(RESULT_MISS)]    =
 242                                 ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
 243                 },
 244                 [C(OP_WRITE)] = {
 245                         [C(RESULT_ACCESS)]  =
 246                                 ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
 247                         [C(RESULT_MISS)]    =
 248                                 ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
 249                 },
 250                 [C(OP_PREFETCH)] = {
 251                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 252                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 253                 },
 254         },
 255         [C(L1I)] = {
 256                 [C(OP_READ)] = {
 257                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 258                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
 259                 },
 260                 [C(OP_WRITE)] = {
 261                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 262                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
 263                 },
 264                 [C(OP_PREFETCH)] = {
 265                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 266                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 267                 },
 268         },
 269         [C(LL)] = {
 270                 [C(OP_READ)] = {
 271                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 272                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 273                 },
 274                 [C(OP_WRITE)] = {
 275                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 276                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 277                 },
 278                 [C(OP_PREFETCH)] = {
 279                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 280                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 281                 },
 282         },
 283         [C(DTLB)] = {
 284                 /*
 285                  * The ARM performance counters can count micro DTLB misses,
 286                  * micro ITLB misses and main TLB misses. There isn't an event
 287                  * for TLB misses, so use the micro misses here and if users
 288                  * want the main TLB misses they can use a raw counter.
 289                  */
 290                 [C(OP_READ)] = {
 291                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 292                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
 293                 },
 294                 [C(OP_WRITE)] = {
 295                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 296                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
 297                 },
 298                 [C(OP_PREFETCH)] = {
 299                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 300                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 301                 },
 302         },
 303         [C(ITLB)] = {
 304                 [C(OP_READ)] = {
 305                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 306                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
 307                 },
 308                 [C(OP_WRITE)] = {
 309                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 310                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
 311                 },
 312                 [C(OP_PREFETCH)] = {
 313                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 314                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 315                 },
 316         },
 317         [C(BPU)] = {
 318                 [C(OP_READ)] = {
 319                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 320                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 321                 },
 322                 [C(OP_WRITE)] = {
 323                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 324                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 325                 },
 326                 [C(OP_PREFETCH)] = {
 327                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 328                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 329                 },
 330         },
 331         [C(NODE)] = {
 332                 [C(OP_READ)] = {
 333                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 334                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 335                 },
 336                 [C(OP_WRITE)] = {
 337                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 338                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 339                 },
 340                 [C(OP_PREFETCH)] = {
 341                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
 342                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
 343                 },
 344         },
 345 };
 346
 347 static inline unsigned long
 348 armv6_pmcr_read(void)
 349 {
 350         u32 val;
 351         asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
 352         return val;
 353 }
 354
 355 static inline void
 356 armv6_pmcr_write(unsigned long val)
 357 {
 358         asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
 359 }
 360
 361 #define ARMV6_PMCR_ENABLE               (1 << 0)
 362 #define ARMV6_PMCR_CTR01_RESET          (1 << 1)
 363 #define ARMV6_PMCR_CCOUNT_RESET         (1 << 2)
 364 #define ARMV6_PMCR_CCOUNT_DIV           (1 << 3)
 365 #define ARMV6_PMCR_COUNT0_IEN           (1 << 4)
 366 #define ARMV6_PMCR_COUNT1_IEN           (1 << 5)
 367 #define ARMV6_PMCR_CCOUNT_IEN           (1 << 6)
 368 #define ARMV6_PMCR_COUNT0_OVERFLOW      (1 << 8)
 369 #define ARMV6_PMCR_COUNT1_OVERFLOW      (1 << 9)
 370 #define ARMV6_PMCR_CCOUNT_OVERFLOW      (1 << 10)
 371 #define ARMV6_PMCR_EVT_COUNT0_SHIFT     20
 372 #define ARMV6_PMCR_EVT_COUNT0_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
 373 #define ARMV6_PMCR_EVT_COUNT1_SHIFT     12
 374 #define ARMV6_PMCR_EVT_COUNT1_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
 375
 376 #define ARMV6_PMCR_OVERFLOWED_MASK \
 377         (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
 378          ARMV6_PMCR_CCOUNT_OVERFLOW)
 379
 380 static inline int
 381 armv6_pmcr_has_overflowed(unsigned long pmcr)
 382 {
 383         return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
 384 }
 385
 386 static inline int
 387 armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
 388                                   enum armv6_counters counter)
 389 {
 390         int ret = 0;
 391
 392         if (ARMV6_CYCLE_COUNTER == counter)
 393                 ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
 394         else if (ARMV6_COUNTER0 == counter)
 395                 ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
 396         else if (ARMV6_COUNTER1 == counter)
 397                 ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
 398         else
 399                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
 400
 401         return ret;
 402 }
 403
 404 static inline u32
 405 armv6pmu_read_counter(int counter)
 406 {
 407         unsigned long value = 0;
 408
 409         if (ARMV6_CYCLE_COUNTER == counter)
 410                 asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
 411         else if (ARMV6_COUNTER0 == counter)
 412                 asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
 413         else if (ARMV6_COUNTER1 == counter)
 414                 asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
 415         else
 416                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
 417
 418         return value;
 419 }
 420
 421 static inline void
 422 armv6pmu_write_counter(int counter,
 423                        u32 value)
 424 {
 425         if (ARMV6_CYCLE_COUNTER == counter)
 426                 asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
 427         else if (ARMV6_COUNTER0 == counter)
 428                 asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
 429         else if (ARMV6_COUNTER1 == counter)
 430                 asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
 431         else
 432                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
 433 }
 434
 435 static void
 436 armv6pmu_enable_event(struct hw_perf_event *hwc,
 437                       int idx)
 438 {
 439         unsigned long val, mask, evt, flags;
 440         struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 441
 442         if (ARMV6_CYCLE_COUNTER == idx) {
 443                 mask    = 0;
 444                 evt     = ARMV6_PMCR_CCOUNT_IEN;
 445         } else if (ARMV6_COUNTER0 == idx) {
 446                 mask    = ARMV6_PMCR_EVT_COUNT0_MASK;
 447                 evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
 448                           ARMV6_PMCR_COUNT0_IEN;
 449         } else if (ARMV6_COUNTER1 == idx) {
 450                 mask    = ARMV6_PMCR_EVT_COUNT1_MASK;
 451                 evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
 452                           ARMV6_PMCR_COUNT1_IEN;
 453         } else {
 454                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
 455                 return;
 456         }
 457
 458         /*
 459          * Mask out the current event and set the counter to count the event
 460          * that we're interested in.
 461          */
 462         raw_spin_lock_irqsave(&events->pmu_lock, flags);
 463         val = armv6_pmcr_read();
 464         val &= ~mask;
 465         val |= evt;
 466         armv6_pmcr_write(val);
 467         raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 468 }
 469
 470 static irqreturn_t
 471 armv6pmu_handle_irq(int irq_num,
 472                     void *dev)
 473 {
 474         unsigned long pmcr = armv6_pmcr_read();
 475         struct perf_sample_data data;
 476         struct pmu_hw_events *cpuc;
 477         struct pt_regs *regs;
 478         int idx;
 479
 480         if (!armv6_pmcr_has_overflowed(pmcr))
 481                 return IRQ_NONE;
 482
 483         regs = get_irq_regs();
 484
 485         /*
 486          * The interrupts are cleared by writing the overflow flags back to
 487          * the control register. All of the other bits don't have any effect
 488          * if they are rewritten, so write the whole value back.
 489          */
 490         armv6_pmcr_write(pmcr);
 491
 492         perf_sample_data_init(&data, 0);
 493
 494         cpuc = &__get_cpu_var(cpu_hw_events);
 495         for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
 496                 struct perf_event *event = cpuc->events[idx];
 497                 struct hw_perf_event *hwc;
 498
 499                 /* Ignore if we don't have an event. */
 500                 if (!event)
 501                         continue;
 502
 503                 /*
 504                  * We have a single interrupt for all counters. Check that
 505                  * each counter has overflowed before we process it.
 506                  */
 507                 if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
 508                         continue;
 509
 510                 hwc = &event->hw;
 511                 armpmu_event_update(event, hwc, idx);
 512                 data.period = event->hw.last_period;
 513                 if (!armpmu_event_set_period(event, hwc, idx))
 514                         continue;
 515
 516                 if (perf_event_overflow(event, &data, regs))
 517                         cpu_pmu->disable(hwc, idx);
 518         }
 519
 520         /*
 521          * Handle the pending perf events.
 522          *
 523          * Note: this call *must* be run with interrupts disabled. For
 524          * platforms that can have the PMU interrupts raised as an NMI, this
 525          * will not work.
 526          */
 527         irq_work_run();
 528
 529         return IRQ_HANDLED;
 530 }
 531
 532 static void
 533 armv6pmu_start(void)
 534 {
 535         unsigned long flags, val;
 536         struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 537
 538         raw_spin_lock_irqsave(&events->pmu_lock, flags);
 539         val = armv6_pmcr_read();
 540         val |= ARMV6_PMCR_ENABLE;
 541         armv6_pmcr_write(val);
 542         raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 543 }
 544
 545 static void
 546 armv6pmu_stop(void)
 547 {
 548         unsigned long flags, val;
 549         struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 550
 551         raw_spin_lock_irqsave(&events->pmu_lock, flags);
 552         val = armv6_pmcr_read();
 553         val &= ~ARMV6_PMCR_ENABLE;
 554         armv6_pmcr_write(val);
 555         raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 556 }
 557
 558 static int
 559 armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
 560                        struct hw_perf_event *event)
 561 {
 562         /* Always place a cycle counter into the cycle counter. */
 563         if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
 564                 if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
 565                         return -EAGAIN;
 566
 567                 return ARMV6_CYCLE_COUNTER;
 568         } else {
 569                 /*
 570                  * For anything other than a cycle counter, try and use
 571                  * counter0 and counter1.
 572                  */
 573                 if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
 574                         return ARMV6_COUNTER1;
 575
 576                 if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
 577                         return ARMV6_COUNTER0;
 578
 579                 /* The counters are all in use. */
 580                 return -EAGAIN;
 581         }
 582 }
 583
 584 static void
 585 armv6pmu_disable_event(struct hw_perf_event *hwc,
 586                        int idx)
 587 {
 588         unsigned long val, mask, evt, flags;
 589         struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 590
 591         if (ARMV6_CYCLE_COUNTER == idx) {
 592                 mask    = ARMV6_PMCR_CCOUNT_IEN;
 593                 evt     = 0;
 594         } else if (ARMV6_COUNTER0 == idx) {
 595                 mask    = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
 596                 evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
 597         } else if (ARMV6_COUNTER1 == idx) {
 598                 mask    = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
 599                 evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
 600         } else {
 601                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
 602                 return;
 603         }
 604
 605         /*
 606          * Mask out the current event and set the counter to count the number
 607          * of ETM bus signal assertion cycles. The external reporting should
 608          * be disabled and so this should never increment.
 609          */
 610         raw_spin_lock_irqsave(&events->pmu_lock, flags);
 611         val = armv6_pmcr_read();
 612         val &= ~mask;
 613         val |= evt;
 614         armv6_pmcr_write(val);
 615         raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 616 }
 617
 618 static void
 619 armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
 620                               int idx)
 621 {
 622         unsigned long val, mask, flags, evt = 0;
 623         struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 624
 625         if (ARMV6_CYCLE_COUNTER == idx) {
 626                 mask    = ARMV6_PMCR_CCOUNT_IEN;
 627         } else if (ARMV6_COUNTER0 == idx) {
 628                 mask    = ARMV6_PMCR_COUNT0_IEN;
 629         } else if (ARMV6_COUNTER1 == idx) {
 630                 mask    = ARMV6_PMCR_COUNT1_IEN;
 631         } else {
 632                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
 633                 return;
 634         }
 635
 636         /*
 637          * Unlike UP ARMv6, we don't have a way of stopping the counters. We
 638          * simply disable the interrupt reporting.
 639          */
 640         raw_spin_lock_irqsave(&events->pmu_lock, flags);
 641         val = armv6_pmcr_read();
 642         val &= ~mask;
 643         val |= evt;
 644         armv6_pmcr_write(val);
 645         raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 646 }
 647
 648 static int armv6_map_event(struct perf_event *event)
 649 {
 650         return map_cpu_event(event, &armv6_perf_map,
 651                                 &armv6_perf_cache_map, 0xFF);
 652 }
 653
 654 static struct arm_pmu armv6pmu = {
 655         .id                     = ARM_PERF_PMU_ID_V6,
 656         .name                   = "v6",
 657         .handle_irq             = armv6pmu_handle_irq,
 658         .enable                 = armv6pmu_enable_event,
 659         .disable                = armv6pmu_disable_event,
 660         .read_counter           = armv6pmu_read_counter,
 661         .write_counter          = armv6pmu_write_counter,
 662         .get_event_idx          = armv6pmu_get_event_idx,
 663         .start                  = armv6pmu_start,
 664         .stop                   = armv6pmu_stop,
 665         .map_event              = armv6_map_event,
 666         .num_events             = 3,
 667         .max_period             = (1LLU << 32) - 1,
 668 };
 669
 670 static struct arm_pmu *__init armv6pmu_init(void)
 671 {
 672         return &armv6pmu;
 673 }
 674
 675 /*
 676  * ARMv6mpcore is almost identical to single core ARMv6 with the exception
 677  * that some of the events have different enumerations and that there is no
 678  * *hack* to stop the programmable counters. To stop the counters we simply
 679  * disable the interrupt reporting and update the event. When unthrottling we
 680  * reset the period and enable the interrupt reporting.
 681  */
 682
 683 static int armv6mpcore_map_event(struct perf_event *event)
 684 {
 685         return map_cpu_event(event, &armv6mpcore_perf_map,
 686                                 &armv6mpcore_perf_cache_map, 0xFF);
 687 }
 688
 689 static struct arm_pmu armv6mpcore_pmu = {
 690         .id                     = ARM_PERF_PMU_ID_V6MP,
 691         .name                   = "v6mpcore",
 692         .handle_irq             = armv6pmu_handle_irq,
 693         .enable                 = armv6pmu_enable_event,
 694         .disable                = armv6mpcore_pmu_disable_event,
 695         .read_counter           = armv6pmu_read_counter,
 696         .write_counter          = armv6pmu_write_counter,
 697         .get_event_idx          = armv6pmu_get_event_idx,
 698         .start                  = armv6pmu_start,
 699         .stop                   = armv6pmu_stop,
 700         .map_event              = armv6mpcore_map_event,
 701         .num_events             = 3,
 702         .max_period             = (1LLU << 32) - 1,
 703 };
 704
 705 static struct arm_pmu *__init armv6mpcore_pmu_init(void)
 706 {
 707         return &armv6mpcore_pmu;
 708 }
 709 #else
 710 static struct arm_pmu *__init armv6pmu_init(void)
 711 {
 712         return NULL;
 713 }
 714
 715 static struct arm_pmu *__init armv6mpcore_pmu_init(void)
 716 {
 717         return NULL;
 718 }
 719 #endif  /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */