arch/arm/mach-at91/Kconfig.non_dt

   1 menu "Atmel Non-DT world"
   2
   3 config HAVE_AT91_DATAFLASH_CARD
   4         bool
   5
   6 choice
   7         prompt "Atmel AT91 Processor Devices for non DT boards"
   8
   9 config ARCH_AT91_NONE
  10         bool "None"
  11
  12 config ARCH_AT91RM9200
  13         bool "AT91RM9200"
  14         select SOC_AT91RM9200
  15
  16 config ARCH_AT91SAM9260
  17         bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
  18         select SOC_AT91SAM9260
  19
  20 config ARCH_AT91SAM9261
  21         bool "AT91SAM9261 or AT91SAM9G10"
  22         select SOC_AT91SAM9261
  23
  24 config ARCH_AT91SAM9263
  25         bool "AT91SAM9263"
  26         select SOC_AT91SAM9263
  27
  28 config ARCH_AT91SAM9RL
  29         bool "AT91SAM9RL"
  30         select SOC_AT91SAM9RL
  31
  32 config ARCH_AT91SAM9G45
  33         bool "AT91SAM9G45"
  34         select SOC_AT91SAM9G45
  35
  36 config ARCH_AT91X40
  37         bool "AT91x40"
  38         depends on !MMU
  39         select ARCH_USES_GETTIMEOFFSET
  40         select MULTI_IRQ_HANDLER
  41         select SPARSE_IRQ
  42
  43 endchoice
  44
  45 config ARCH_AT91SAM9G20
  46         bool
  47         select ARCH_AT91SAM9260
  48
  49 config ARCH_AT91SAM9G10
  50         bool
  51         select ARCH_AT91SAM9261
  52
  53 # ----------------------------------------------------------
  54
  55 if ARCH_AT91RM9200
  56
  57 comment "AT91RM9200 Board Type"
  58
  59 config MACH_ONEARM
  60         bool "Ajeco 1ARM Single Board Computer"
  61         help
  62           Select this if you are using Ajeco's 1ARM Single Board Computer.
  63           <http://www.ajeco.fi/>
  64
  65 config MACH_AT91RM9200EK
  66         bool "Atmel AT91RM9200-EK Evaluation Kit"
  67         select HAVE_AT91_DATAFLASH_CARD
  68         help
  69           Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
  70           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
  71
  72 config MACH_CSB337
  73         bool "Cogent CSB337"
  74         help
  75           Select this if you are using Cogent's CSB337 board.
  76           <http://www.cogcomp.com/csb_csb337.htm>
  77
  78 config MACH_CSB637
  79         bool "Cogent CSB637"
  80         help
  81           Select this if you are using Cogent's CSB637 board.
  82           <http://www.cogcomp.com/csb_csb637.htm>
  83
  84 config MACH_CARMEVA
  85         bool "Conitec ARM&EVA"
  86         help
  87           Select this if you are using Conitec's AT91RM9200-MCU-Module.
  88           <http://www.conitec.net/english/linuxboard.php>
  89
  90 config MACH_ATEB9200
  91         bool "Embest ATEB9200"
  92         help
  93           Select this if you are using Embest's ATEB9200 board.
  94           <http://www.embedinfo.com/english/product/ATEB9200.asp>
  95
  96 config MACH_KB9200
  97         bool "KwikByte KB920x"
  98         help
  99           Select this if you are using KwikByte's KB920x board.
 100           <http://www.kwikbyte.com/KB9202.html>
 101
 102 config MACH_PICOTUX2XX
 103         bool "picotux 200"
 104         help
 105           Select this if you are using a picotux 200.
 106           <http://www.picotux.com/>
 107
 108 config MACH_KAFA
 109         bool "Sperry-Sun KAFA board"
 110         help
 111           Select this if you are using Sperry-Sun's KAFA board.
 112
 113 config MACH_ECBAT91
 114         bool "emQbit ECB_AT91 SBC"
 115         select HAVE_AT91_DATAFLASH_CARD
 116         help
 117           Select this if you are using emQbit's ECB_AT91 board.
 118           <http://wiki.emqbit.com/free-ecb-at91>
 119
 120 config MACH_YL9200
 121         bool "ucDragon YL-9200"
 122         help
 123           Select this if you are using the ucDragon YL-9200 board.
 124
 125 config MACH_CPUAT91
 126         bool "Eukrea CPUAT91"
 127         help
 128           Select this if you are using the Eukrea Electromatique's
 129           CPUAT91 board <http://www.eukrea.com/>.
 130
 131 config MACH_ECO920
 132         bool "eco920"
 133         help
 134           Select this if you are using the eco920 board
 135
 136 config MACH_RSI_EWS
 137         bool "RSI Embedded Webserver"
 138         depends on ARCH_AT91RM9200
 139         help
 140           Select this if you are using RSIs EWS board.
 141 endif
 142
 143 # ----------------------------------------------------------
 144
 145 if ARCH_AT91SAM9260
 146
 147 comment "AT91SAM9260 Variants"
 148
 149 comment "AT91SAM9260 / AT91SAM9XE Board Type"
 150
 151 config MACH_AT91SAM9260EK
 152         bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 153         select HAVE_AT91_DATAFLASH_CARD
 154         help
 155           Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 156           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 157
 158 config MACH_CAM60
 159         bool "KwikByte KB9260 (CAM60) board"
 160         help
 161           Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 162           <http://www.kwikbyte.com/KB9260.html>
 163
 164 config MACH_SAM9_L9260
 165         bool "Olimex SAM9-L9260 board"
 166         select HAVE_AT91_DATAFLASH_CARD
 167         help
 168           Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 169           <http://www.olimex.com/dev/sam9-L9260.html>
 170
 171 config MACH_AFEB9260
 172         bool "Custom afeb9260 board v1"
 173         help
 174           Select this if you are using custom afeb9260 board based on
 175           open hardware design. Select this for revision 1 of the board.
 176           <svn://194.85.238.22/home/users/george/svn/arm9eb>
 177           <http://groups.google.com/group/arm9fpga-evolution-board>
 178
 179 config MACH_QIL_A9260
 180         bool "CALAO QIL-A9260 board"
 181         help
 182           Select this if you are using a Calao Systems QIL-A9260 Board.
 183           <http://www.calao-systems.com>
 184
 185 config MACH_CPU9260
 186         bool "Eukrea CPU9260 board"
 187         help
 188           Select this if you are using a Eukrea Electromatique's
 189           CPU9260 Board <http://www.eukrea.com/>
 190
 191 config MACH_FLEXIBITY
 192         bool "Flexibity Connect board"
 193         help
 194           Select this if you are using Flexibity Connect board
 195           <http://www.flexibity.com>
 196
 197 comment "AT91SAM9G20 Board Type"
 198
 199 config MACH_AT91SAM9G20EK
 200         bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 201         select HAVE_AT91_DATAFLASH_CARD
 202         help
 203           Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 204           that embeds only one SD/MMC slot.
 205
 206 config MACH_AT91SAM9G20EK_2MMC
 207         depends on MACH_AT91SAM9G20EK
 208         bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
 209         help
 210           Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 211           with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 212           onwards.
 213           <http://www.atmel.com/tools/SAM9G20-EK.aspx>
 214
 215 config MACH_CPU9G20
 216         bool "Eukrea CPU9G20 board"
 217         help
 218           Select this if you are using a Eukrea Electromatique's
 219           CPU9G20 Board <http://www.eukrea.com/>
 220
 221 config MACH_ACMENETUSFOXG20
 222         bool "Acme Systems srl FOX Board G20"
 223         help
 224           Select this if you are using Acme Systems
 225           FOX Board G20 <http://www.acmesystems.it>
 226
 227 config MACH_PORTUXG20
 228         bool "taskit PortuxG20"
 229         help
 230           Select this if you are using taskit's PortuxG20.
 231           <http://www.taskit.de/en/>
 232
 233 config MACH_STAMP9G20
 234         bool "taskit Stamp9G20 CPU module"
 235         help
 236           Select this if you are using taskit's Stamp9G20 CPU module on its
 237           evaluation board.
 238           <http://www.taskit.de/en/>
 239
 240 config MACH_PCONTROL_G20
 241         bool "PControl G20 CPU module"
 242         help
 243           Select this if you are using taskit's Stamp9G20 CPU module on this
 244           carrier board, beeing the decentralized unit of a building automation
 245           system; featuring nvram, eth-switch, iso-rs485, display, io
 246
 247 config MACH_GSIA18S
 248         bool "GS_IA18_S board"
 249         help
 250           This enables support for the GS_IA18_S board
 251           produced by GeoSIG Ltd company. This is an internet accelerograph.
 252           <http://www.geosig.com>
 253
 254 config MACH_SNAPPER_9260
 255         bool "Bluewater Systems Snapper 9260/9G20 module"
 256         help
 257           Select this if you are using the Bluewater Systems Snapper 9260 or
 258           Snapper 9G20 modules.
 259           <http://www.bluewatersys.com/>
 260 endif
 261
 262 # ----------------------------------------------------------
 263
 264 if ARCH_AT91SAM9261
 265
 266 comment "AT91SAM9261 Board Type"
 267
 268 config MACH_AT91SAM9261EK
 269         bool "Atmel AT91SAM9261-EK Evaluation Kit"
 270         select HAVE_AT91_DATAFLASH_CARD
 271         help
 272           Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 273           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
 274
 275 comment "AT91SAM9G10 Board Type"
 276
 277 config MACH_AT91SAM9G10EK
 278         bool "Atmel AT91SAM9G10-EK Evaluation Kit"
 279         select HAVE_AT91_DATAFLASH_CARD
 280         help
 281           Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 282           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
 283
 284 endif
 285
 286 # ----------------------------------------------------------
 287
 288 if ARCH_AT91SAM9263
 289
 290 comment "AT91SAM9263 Board Type"
 291
 292 config MACH_AT91SAM9263EK
 293         bool "Atmel AT91SAM9263-EK Evaluation Kit"
 294         select HAVE_AT91_DATAFLASH_CARD
 295         help
 296           Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 297           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 298
 299 endif
 300
 301 # ----------------------------------------------------------
 302
 303 if ARCH_AT91SAM9RL
 304
 305 comment "AT91SAM9RL Board Type"
 306
 307 config MACH_AT91SAM9RLEK
 308         bool "Atmel AT91SAM9RL-EK Evaluation Kit"
 309         help
 310           Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 311
 312 endif
 313
 314 # ----------------------------------------------------------
 315
 316 if ARCH_AT91SAM9G45
 317
 318 comment "AT91SAM9G45 Board Type"
 319
 320 config MACH_AT91SAM9M10G45EK
 321         bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 322         help
 323           Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
 324           Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
 325           families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
 326           <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
 327
 328 endif
 329
 330 # ----------------------------------------------------------
 331
 332 if ARCH_AT91X40
 333
 334 comment "AT91X40 Board Type"
 335
 336 config MACH_AT91EB01
 337         bool "Atmel AT91EB01 Evaluation Kit"
 338         help
 339           Select this if you are using Atmel's AT91EB01 Evaluation Kit.
 340           It is also a popular target for simulators such as GDB's
 341           ARM simulator (commonly known as the ARMulator) and the
 342           Skyeye simulator.
 343
 344 endif
 345
 346 # ----------------------------------------------------------
 347
 348 comment "AT91 Board Options"
 349
 350 config MTD_AT91_DATAFLASH_CARD
 351         bool "Enable DataFlash Card support"
 352         depends on HAVE_AT91_DATAFLASH_CARD
 353         help
 354           Enable support for the DataFlash card.
 355
 356 endmenu