2 * arch/arm/mach-at91/at91sam9263.c
4 * Copyright (C) 2007 Atmel Corporation.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
13 #include <linux/module.h>
15 #include <asm/mach/arch.h>
16 #include <asm/mach/map.h>
17 #include <asm/arch/at91sam9263.h>
18 #include <asm/arch/at91_pmc.h>
19 #include <asm/arch/at91_rstc.h>
24 static struct map_desc at91sam9263_io_desc
[] __initdata
= {
26 .virtual = AT91_VA_BASE_SYS
,
27 .pfn
= __phys_to_pfn(AT91_BASE_SYS
),
31 .virtual = AT91_IO_VIRT_BASE
- AT91SAM9263_SRAM0_SIZE
,
32 .pfn
= __phys_to_pfn(AT91SAM9263_SRAM0_BASE
),
33 .length
= AT91SAM9263_SRAM0_SIZE
,
36 .virtual = AT91_IO_VIRT_BASE
- AT91SAM9263_SRAM0_SIZE
- AT91SAM9263_SRAM1_SIZE
,
37 .pfn
= __phys_to_pfn(AT91SAM9263_SRAM1_BASE
),
38 .length
= AT91SAM9263_SRAM1_SIZE
,
43 /* --------------------------------------------------------------------
45 * -------------------------------------------------------------------- */
48 * The peripheral clocks.
50 static struct clk pioA_clk
= {
52 .pmc_mask
= 1 << AT91SAM9263_ID_PIOA
,
53 .type
= CLK_TYPE_PERIPHERAL
,
55 static struct clk pioB_clk
= {
57 .pmc_mask
= 1 << AT91SAM9263_ID_PIOB
,
58 .type
= CLK_TYPE_PERIPHERAL
,
60 static struct clk pioCDE_clk
= {
62 .pmc_mask
= 1 << AT91SAM9263_ID_PIOCDE
,
63 .type
= CLK_TYPE_PERIPHERAL
,
65 static struct clk usart0_clk
= {
67 .pmc_mask
= 1 << AT91SAM9263_ID_US0
,
68 .type
= CLK_TYPE_PERIPHERAL
,
70 static struct clk usart1_clk
= {
72 .pmc_mask
= 1 << AT91SAM9263_ID_US1
,
73 .type
= CLK_TYPE_PERIPHERAL
,
75 static struct clk usart2_clk
= {
77 .pmc_mask
= 1 << AT91SAM9263_ID_US2
,
78 .type
= CLK_TYPE_PERIPHERAL
,
80 static struct clk mmc0_clk
= {
82 .pmc_mask
= 1 << AT91SAM9263_ID_MCI0
,
83 .type
= CLK_TYPE_PERIPHERAL
,
85 static struct clk mmc1_clk
= {
87 .pmc_mask
= 1 << AT91SAM9263_ID_MCI1
,
88 .type
= CLK_TYPE_PERIPHERAL
,
90 static struct clk can_clk
= {
92 .pmc_mask
= 1 << AT91SAM9263_ID_CAN
,
93 .type
= CLK_TYPE_PERIPHERAL
,
95 static struct clk twi_clk
= {
97 .pmc_mask
= 1 << AT91SAM9263_ID_TWI
,
98 .type
= CLK_TYPE_PERIPHERAL
,
100 static struct clk spi0_clk
= {
102 .pmc_mask
= 1 << AT91SAM9263_ID_SPI0
,
103 .type
= CLK_TYPE_PERIPHERAL
,
105 static struct clk spi1_clk
= {
107 .pmc_mask
= 1 << AT91SAM9263_ID_SPI1
,
108 .type
= CLK_TYPE_PERIPHERAL
,
110 static struct clk ssc0_clk
= {
112 .pmc_mask
= 1 << AT91SAM9263_ID_SSC0
,
113 .type
= CLK_TYPE_PERIPHERAL
,
115 static struct clk ssc1_clk
= {
117 .pmc_mask
= 1 << AT91SAM9263_ID_SSC1
,
118 .type
= CLK_TYPE_PERIPHERAL
,
120 static struct clk ac97_clk
= {
122 .pmc_mask
= 1 << AT91SAM9263_ID_AC97C
,
123 .type
= CLK_TYPE_PERIPHERAL
,
125 static struct clk tcb_clk
= {
127 .pmc_mask
= 1 << AT91SAM9263_ID_TCB
,
128 .type
= CLK_TYPE_PERIPHERAL
,
130 static struct clk pwmc_clk
= {
132 .pmc_mask
= 1 << AT91SAM9263_ID_PWMC
,
133 .type
= CLK_TYPE_PERIPHERAL
,
135 static struct clk macb_clk
= {
137 .pmc_mask
= 1 << AT91SAM9263_ID_EMAC
,
138 .type
= CLK_TYPE_PERIPHERAL
,
140 static struct clk dma_clk
= {
142 .pmc_mask
= 1 << AT91SAM9263_ID_DMA
,
143 .type
= CLK_TYPE_PERIPHERAL
,
145 static struct clk twodge_clk
= {
147 .pmc_mask
= 1 << AT91SAM9263_ID_2DGE
,
148 .type
= CLK_TYPE_PERIPHERAL
,
150 static struct clk udc_clk
= {
152 .pmc_mask
= 1 << AT91SAM9263_ID_UDP
,
153 .type
= CLK_TYPE_PERIPHERAL
,
155 static struct clk isi_clk
= {
157 .pmc_mask
= 1 << AT91SAM9263_ID_ISI
,
158 .type
= CLK_TYPE_PERIPHERAL
,
160 static struct clk lcdc_clk
= {
162 .pmc_mask
= 1 << AT91SAM9263_ID_LCDC
,
163 .type
= CLK_TYPE_PERIPHERAL
,
165 static struct clk ohci_clk
= {
167 .pmc_mask
= 1 << AT91SAM9263_ID_UHP
,
168 .type
= CLK_TYPE_PERIPHERAL
,
171 static struct clk
*periph_clocks
[] __initdata
= {
200 * The four programmable clocks.
201 * You must configure pin multiplexing to bring these signals out.
203 static struct clk pck0
= {
205 .pmc_mask
= AT91_PMC_PCK0
,
206 .type
= CLK_TYPE_PROGRAMMABLE
,
209 static struct clk pck1
= {
211 .pmc_mask
= AT91_PMC_PCK1
,
212 .type
= CLK_TYPE_PROGRAMMABLE
,
215 static struct clk pck2
= {
217 .pmc_mask
= AT91_PMC_PCK2
,
218 .type
= CLK_TYPE_PROGRAMMABLE
,
221 static struct clk pck3
= {
223 .pmc_mask
= AT91_PMC_PCK3
,
224 .type
= CLK_TYPE_PROGRAMMABLE
,
228 static void __init
at91sam9263_register_clocks(void)
232 for (i
= 0; i
< ARRAY_SIZE(periph_clocks
); i
++)
233 clk_register(periph_clocks
[i
]);
241 /* --------------------------------------------------------------------
243 * -------------------------------------------------------------------- */
245 static struct at91_gpio_bank at91sam9263_gpio
[] = {
247 .id
= AT91SAM9263_ID_PIOA
,
251 .id
= AT91SAM9263_ID_PIOB
,
255 .id
= AT91SAM9263_ID_PIOCDE
,
257 .clock
= &pioCDE_clk
,
259 .id
= AT91SAM9263_ID_PIOCDE
,
261 .clock
= &pioCDE_clk
,
263 .id
= AT91SAM9263_ID_PIOCDE
,
265 .clock
= &pioCDE_clk
,
269 static void at91sam9263_reset(void)
271 at91_sys_write(AT91_RSTC_CR
, AT91_RSTC_KEY
| AT91_RSTC_PROCRST
| AT91_RSTC_PERRST
);
275 /* --------------------------------------------------------------------
276 * AT91SAM9263 processor initialization
277 * -------------------------------------------------------------------- */
279 void __init
at91sam9263_initialize(unsigned long main_clock
)
281 /* Map peripherals */
282 iotable_init(at91sam9263_io_desc
, ARRAY_SIZE(at91sam9263_io_desc
));
284 at91_arch_reset
= at91sam9263_reset
;
285 at91_extern_irq
= (1 << AT91SAM9263_ID_IRQ0
) | (1 << AT91SAM9263_ID_IRQ1
);
287 /* Init clock subsystem */
288 at91_clock_init(main_clock
);
290 /* Register the processor-specific clocks */
291 at91sam9263_register_clocks();
293 /* Register GPIO subsystem */
294 at91_gpio_init(at91sam9263_gpio
, 5);
297 /* --------------------------------------------------------------------
298 * Interrupt initialization
299 * -------------------------------------------------------------------- */
302 * The default interrupt priority levels (0 = lowest, 7 = highest).
304 static unsigned int at91sam9263_default_irq_priority
[NR_AIC_IRQS
] __initdata
= {
305 7, /* Advanced Interrupt Controller (FIQ) */
306 7, /* System Peripherals */
307 1, /* Parallel IO Controller A */
308 1, /* Parallel IO Controller B */
309 1, /* Parallel IO Controller C, D and E */
315 0, /* Multimedia Card Interface 0 */
316 0, /* Multimedia Card Interface 1 */
318 6, /* Two-Wire Interface */
319 5, /* Serial Peripheral Interface 0 */
320 5, /* Serial Peripheral Interface 1 */
321 4, /* Serial Synchronous Controller 0 */
322 4, /* Serial Synchronous Controller 1 */
323 5, /* AC97 Controller */
324 0, /* Timer Counter 0, 1 and 2 */
325 0, /* Pulse Width Modulation Controller */
328 0, /* 2D Graphic Engine */
329 2, /* USB Device Port */
330 0, /* Image Sensor Interface */
331 3, /* LDC Controller */
332 0, /* DMA Controller */
334 2, /* USB Host port */
335 0, /* Advanced Interrupt Controller (IRQ0) */
336 0, /* Advanced Interrupt Controller (IRQ1) */
339 void __init
at91sam9263_init_interrupts(unsigned int priority
[NR_AIC_IRQS
])
342 priority
= at91sam9263_default_irq_priority
;
344 /* Initialize the AIC interrupt controller */
345 at91_aic_init(priority
);
347 /* Enable GPIO interrupts */
348 at91_gpio_irq_setup();