arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8         select IRQ_DOMAIN
   9
  10 config ARCH_DAVINCI_DMx
  11         bool
  12
  13 menu "TI DaVinci Implementations"
  14
  15 comment "DaVinci Core Type"
  16
  17 config ARCH_DAVINCI_DM644x
  18         bool "DaVinci 644x based system"
  19         select AINTC
  20         select ARCH_DAVINCI_DMx
  21
  22 config ARCH_DAVINCI_DM355
  23         bool "DaVinci 355 based system"
  24         select AINTC
  25         select ARCH_DAVINCI_DMx
  26
  27 config ARCH_DAVINCI_DM646x
  28         bool "DaVinci 646x based system"
  29         select AINTC
  30         select ARCH_DAVINCI_DMx
  31
  32 config ARCH_DAVINCI_DA830
  33         bool "DA830/OMAP-L137/AM17x based system"
  34         depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
  35         select ARCH_DAVINCI_DA8XX
  36         # needed on silicon revs 1.0, 1.1:
  37         select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
  38         select CP_INTC
  39
  40 config ARCH_DAVINCI_DA850
  41         bool "DA850/OMAP-L138/AM18x based system"
  42         depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
  43         select ARCH_DAVINCI_DA8XX
  44         select CP_INTC
  45
  46 config ARCH_DAVINCI_DA8XX
  47         bool
  48
  49 config ARCH_DAVINCI_DM365
  50         bool "DaVinci 365 based system"
  51         select AINTC
  52         select ARCH_DAVINCI_DMx
  53
  54 comment "DaVinci Board Type"
  55
  56 config MACH_DA8XX_DT
  57         bool "Support DA8XX platforms using device tree"
  58         default y
  59         depends on ARCH_DAVINCI_DA850
  60         select PINCTRL
  61         help
  62           Say y here to include support for TI DaVinci DA850 based using
  63           Flattened Device Tree. More information at Documentation/devicetree
  64
  65 config MACH_DAVINCI_EVM
  66         bool "TI DM644x EVM"
  67         default ARCH_DAVINCI_DM644x
  68         depends on ARCH_DAVINCI_DM644x
  69         help
  70           Configure this option to specify the whether the board used
  71           for development is a DM644x EVM
  72
  73 config MACH_SFFSDR
  74         bool "Lyrtech SFFSDR"
  75         depends on ARCH_DAVINCI_DM644x
  76         help
  77           Say Y here to select the Lyrtech Small Form Factor
  78           Software Defined Radio (SFFSDR) board.
  79
  80 config MACH_NEUROS_OSD2
  81         bool "Neuros OSD2 Open Television Set Top Box"
  82         depends on ARCH_DAVINCI_DM644x
  83         help
  84           Configure this option to specify the whether the board used
  85           for development is a Neuros OSD2 Open Set Top Box.
  86
  87 config MACH_DAVINCI_DM355_EVM
  88         bool "TI DM355 EVM"
  89         default ARCH_DAVINCI_DM355
  90         depends on ARCH_DAVINCI_DM355
  91         help
  92           Configure this option to specify the whether the board used
  93           for development is a DM355 EVM
  94
  95 config MACH_DM355_LEOPARD
  96         bool "DM355 Leopard board"
  97         depends on ARCH_DAVINCI_DM355
  98         help
  99           Configure this option to specify the whether the board used
 100           for development is a DM355 Leopard board.
 101
 102 config MACH_DAVINCI_DM6467_EVM
 103         bool "TI DM6467 EVM"
 104         default ARCH_DAVINCI_DM646x
 105         depends on ARCH_DAVINCI_DM646x
 106         select MACH_DAVINCI_DM6467TEVM
 107         help
 108           Configure this option to specify the whether the board used
 109           for development is a DM6467 EVM
 110
 111 config MACH_DAVINCI_DM6467TEVM
 112         bool
 113
 114 config MACH_DAVINCI_DM365_EVM
 115         bool "TI DM365 EVM"
 116         default ARCH_DAVINCI_DM365
 117         depends on ARCH_DAVINCI_DM365
 118         help
 119           Configure this option to specify whether the board used
 120           for development is a DM365 EVM
 121
 122 config MACH_DAVINCI_DA830_EVM
 123         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 124         default ARCH_DAVINCI_DA830
 125         depends on ARCH_DAVINCI_DA830
 126         select GPIO_PCF857X if I2C
 127         help
 128           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 129
 130 choice
 131         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 132         depends on MACH_DAVINCI_DA830_EVM
 133         help
 134           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 135           detected automatically based on successful probe of the I2C
 136           based GPIO expander on that board. This option selected in this
 137           menu has an effect only in case of a successful UI card detection.
 138
 139 config DA830_UI_LCD
 140         bool "LCD"
 141         help
 142           Say Y here to use the LCD as a framebuffer or simple character
 143           display.
 144
 145 config DA830_UI_NAND
 146         bool "NAND flash"
 147         help
 148           Say Y here to use the NAND flash. Do not forget to setup
 149           the switch correctly.
 150 endchoice
 151
 152 config MACH_DAVINCI_DA850_EVM
 153         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 154         default ARCH_DAVINCI_DA850
 155         depends on ARCH_DAVINCI_DA850
 156         help
 157           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 158
 159 choice
 160         prompt "Select peripherals connected to expander on UI board"
 161         depends on MACH_DAVINCI_DA850_EVM
 162         help
 163           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 164           EVM is detected automatically based on successful probe of the I2C
 165           based GPIO expander on that card. This option selected in this
 166           menu has an effect only in case of a successful UI card detection.
 167
 168 config DA850_UI_NONE
 169         bool "No peripheral is enabled"
 170         help
 171           Say Y if you do not want to enable any of the peripherals connected
 172           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 173
 174 config DA850_UI_RMII
 175         bool "RMII Ethernet PHY"
 176         help
 177           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 178           EVM. This PHY is found on the UI daughter card that is supplied with
 179           the EVM.
 180           NOTE: Please take care while choosing this option, MII PHY will
 181           not be functional if RMII mode is selected.
 182
 183 config DA850_UI_SD_VIDEO_PORT
 184         bool "Video Port Interface"
 185         help
 186           Say Y if you want to use Video Port Interface (VPIF) on the
 187           DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
 188           UI daughter card that is supplied with the EVM.
 189
 190 endchoice
 191
 192 config MACH_MITYOMAPL138
 193         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 194         depends on ARCH_DAVINCI_DA850
 195         help
 196           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 197           System on Module.  Information on this SoM may be found at
 198           http://www.mitydsp.com
 199
 200 config MACH_OMAPL138_HAWKBOARD
 201         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 202         depends on ARCH_DAVINCI_DA850
 203         help
 204           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 205           Information of this board may be found at
 206           http://www.hawkboard.org/
 207
 208 config DAVINCI_MUX
 209         bool "DAVINCI multiplexing support"
 210         depends on ARCH_DAVINCI
 211         default y
 212         help
 213           Pin multiplexing support for DAVINCI boards. If your bootloader
 214           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 215           say Y.
 216
 217 config DAVINCI_MUX_DEBUG
 218         bool "Multiplexing debug output"
 219         depends on DAVINCI_MUX
 220         help
 221           Makes the multiplexing functions print out a lot of debug info.
 222           This is useful if you want to find out the correct values of the
 223           multiplexing registers.
 224
 225 config DAVINCI_MUX_WARNINGS
 226         bool "Warn about pins the bootloader didn't set up"
 227         depends on DAVINCI_MUX
 228         help
 229           Choose Y here to warn whenever driver initialization logic needs
 230           to change the pin multiplexing setup. When there are no warnings
 231           printed, it's safe to deselect DAVINCI_MUX for your product.
 232
 233 config DAVINCI_RESET_CLOCKS
 234         bool "Reset unused clocks during boot"
 235         depends on ARCH_DAVINCI
 236         help
 237           Say Y if you want to reset unused clocks during boot.
 238           This option saves power, but assumes all drivers are
 239           using the clock framework. Broken drivers that do not
 240           yet use clock framework may not work with this option.
 241           If you are booting from another operating system, you
 242           probably do not want this option enabled until your
 243           device drivers work properly.
 244
 245 endmenu
 246
 247 endif