arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8         select IRQ_DOMAIN
   9
  10 config ARCH_DAVINCI_DMx
  11         bool
  12         select CPU_ARM926T
  13
  14 menu "TI DaVinci Implementations"
  15
  16 comment "DaVinci Core Type"
  17
  18 config ARCH_DAVINCI_DM644x
  19         bool "DaVinci 644x based system"
  20         select AINTC
  21         select ARCH_DAVINCI_DMx
  22
  23 config ARCH_DAVINCI_DM355
  24         bool "DaVinci 355 based system"
  25         select AINTC
  26         select ARCH_DAVINCI_DMx
  27
  28 config ARCH_DAVINCI_DM646x
  29         bool "DaVinci 646x based system"
  30         select AINTC
  31         select ARCH_DAVINCI_DMx
  32
  33 config ARCH_DAVINCI_DA830
  34         bool "DA830/OMAP-L137/AM17x based system"
  35         select ARCH_DAVINCI_DA8XX
  36         select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
  37         select CP_INTC
  38
  39 config ARCH_DAVINCI_DA850
  40         bool "DA850/OMAP-L138/AM18x based system"
  41         select ARCH_DAVINCI_DA8XX
  42         select CP_INTC
  43
  44 config ARCH_DAVINCI_DA8XX
  45         bool
  46         select CPU_ARM926T
  47
  48 config ARCH_DAVINCI_DM365
  49         bool "DaVinci 365 based system"
  50         select AINTC
  51         select ARCH_DAVINCI_DMx
  52
  53 comment "DaVinci Board Type"
  54
  55 config MACH_DA8XX_DT
  56         bool "Support DA8XX platforms using device tree"
  57         default y
  58         depends on ARCH_DAVINCI_DA8XX
  59         select PINCTRL
  60         help
  61           Say y here to include support for TI DaVinci DA850 based using
  62           Flattened Device Tree. More information at Documentation/devicetree
  63
  64 config MACH_DAVINCI_EVM
  65         bool "TI DM644x EVM"
  66         default ARCH_DAVINCI_DM644x
  67         depends on ARCH_DAVINCI_DM644x
  68         select EEPROM_AT24
  69         select I2C
  70         help
  71           Configure this option to specify the whether the board used
  72           for development is a DM644x EVM
  73
  74 config MACH_SFFSDR
  75         bool "Lyrtech SFFSDR"
  76         depends on ARCH_DAVINCI_DM644x
  77         select EEPROM_AT24
  78         select I2C
  79         help
  80           Say Y here to select the Lyrtech Small Form Factor
  81           Software Defined Radio (SFFSDR) board.
  82
  83 config MACH_NEUROS_OSD2
  84         bool "Neuros OSD2 Open Television Set Top Box"
  85         depends on ARCH_DAVINCI_DM644x
  86         help
  87           Configure this option to specify the whether the board used
  88           for development is a Neuros OSD2 Open Set Top Box.
  89
  90 config MACH_DAVINCI_DM355_EVM
  91         bool "TI DM355 EVM"
  92         default ARCH_DAVINCI_DM355
  93         depends on ARCH_DAVINCI_DM355
  94         help
  95           Configure this option to specify the whether the board used
  96           for development is a DM355 EVM
  97
  98 config MACH_DM355_LEOPARD
  99         bool "DM355 Leopard board"
 100         depends on ARCH_DAVINCI_DM355
 101         help
 102           Configure this option to specify the whether the board used
 103           for development is a DM355 Leopard board.
 104
 105 config MACH_DAVINCI_DM6467_EVM
 106         bool "TI DM6467 EVM"
 107         default ARCH_DAVINCI_DM646x
 108         depends on ARCH_DAVINCI_DM646x
 109         select EEPROM_AT24
 110         select I2C
 111         select MACH_DAVINCI_DM6467TEVM
 112         help
 113           Configure this option to specify the whether the board used
 114           for development is a DM6467 EVM
 115
 116 config MACH_DAVINCI_DM6467TEVM
 117         bool
 118
 119 config MACH_DAVINCI_DM365_EVM
 120         bool "TI DM365 EVM"
 121         default ARCH_DAVINCI_DM365
 122         depends on ARCH_DAVINCI_DM365
 123         select EEPROM_AT24
 124         select I2C
 125         help
 126           Configure this option to specify whether the board used
 127           for development is a DM365 EVM
 128
 129 config MACH_DAVINCI_DA830_EVM
 130         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 131         default ARCH_DAVINCI_DA830
 132         depends on ARCH_DAVINCI_DA830
 133         select EEPROM_AT24
 134         select GPIO_PCF857X
 135         select I2C
 136         help
 137           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 138
 139 choice
 140         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 141         depends on MACH_DAVINCI_DA830_EVM
 142         help
 143           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 144           detected automatically based on successful probe of the I2C
 145           based GPIO expander on that board. This option selected in this
 146           menu has an effect only in case of a successful UI card detection.
 147
 148 config DA830_UI_LCD
 149         bool "LCD"
 150         help
 151           Say Y here to use the LCD as a framebuffer or simple character
 152           display.
 153
 154 config DA830_UI_NAND
 155         bool "NAND flash"
 156         help
 157           Say Y here to use the NAND flash. Do not forget to setup
 158           the switch correctly.
 159 endchoice
 160
 161 config MACH_DAVINCI_DA850_EVM
 162         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 163         default ARCH_DAVINCI_DA850
 164         depends on ARCH_DAVINCI_DA850
 165         help
 166           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 167
 168 choice
 169         prompt "Select peripherals connected to expander on UI board"
 170         depends on MACH_DAVINCI_DA850_EVM
 171         help
 172           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 173           EVM is detected automatically based on successful probe of the I2C
 174           based GPIO expander on that card. This option selected in this
 175           menu has an effect only in case of a successful UI card detection.
 176
 177 config DA850_UI_NONE
 178         bool "No peripheral is enabled"
 179         help
 180           Say Y if you do not want to enable any of the peripherals connected
 181           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 182
 183 config DA850_UI_RMII
 184         bool "RMII Ethernet PHY"
 185         help
 186           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 187           EVM. This PHY is found on the UI daughter card that is supplied with
 188           the EVM.
 189           NOTE: Please take care while choosing this option, MII PHY will
 190           not be functional if RMII mode is selected.
 191
 192 config DA850_UI_SD_VIDEO_PORT
 193         bool "Video Port Interface"
 194         help
 195           Say Y if you want to use Video Port Interface (VPIF) on the
 196           DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
 197           UI daughter card that is supplied with the EVM.
 198
 199 endchoice
 200
 201 config DA850_WL12XX
 202         bool "AM18x wl1271 daughter board"
 203         depends on MACH_DAVINCI_DA850_EVM
 204         help
 205           The wl1271 daughter card for AM18x EVMs is a combo wireless
 206           connectivity add-on card, based on the LS Research TiWi module with
 207           Texas Instruments' wl1271 solution.
 208           Say Y if you want to use a wl1271 expansion card connected to the
 209           AM18x EVM.
 210
 211
 212 config MACH_MITYOMAPL138
 213         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 214         depends on ARCH_DAVINCI_DA850
 215         select EEPROM_AT24
 216         select I2C
 217         help
 218           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 219           System on Module.  Information on this SoM may be found at
 220           http://www.mitydsp.com
 221
 222 config MACH_OMAPL138_HAWKBOARD
 223         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 224         depends on ARCH_DAVINCI_DA850
 225         help
 226           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 227           Information of this board may be found at
 228           http://www.hawkboard.org/
 229
 230 config DAVINCI_MUX
 231         bool "DAVINCI multiplexing support"
 232         depends on ARCH_DAVINCI
 233         default y
 234         help
 235           Pin multiplexing support for DAVINCI boards. If your bootloader
 236           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 237           say Y.
 238
 239 config DAVINCI_MUX_DEBUG
 240         bool "Multiplexing debug output"
 241         depends on DAVINCI_MUX
 242         help
 243           Makes the multiplexing functions print out a lot of debug info.
 244           This is useful if you want to find out the correct values of the
 245           multiplexing registers.
 246
 247 config DAVINCI_MUX_WARNINGS
 248         bool "Warn about pins the bootloader didn't set up"
 249         depends on DAVINCI_MUX
 250         help
 251           Choose Y here to warn whenever driver initialization logic needs
 252           to change the pin multiplexing setup. When there are no warnings
 253           printed, it's safe to deselect DAVINCI_MUX for your product.
 254
 255 config DAVINCI_RESET_CLOCKS
 256         bool "Reset unused clocks during boot"
 257         depends on ARCH_DAVINCI
 258         help
 259           Say Y if you want to reset unused clocks during boot.
 260           This option saves power, but assumes all drivers are
 261           using the clock framework. Broken drivers that do not
 262           yet use clock framework may not work with this option.
 263           If you are booting from another operating system, you
 264           probably do not want this option enabled until your
 265           device drivers work properly.
 266
 267 endmenu
 268
 269 endif