]> git.proxmox.com Git - mirror_ubuntu-kernels.git/blob - arch/arm/mach-ep93xx/simone.c
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
[mirror_ubuntu-kernels.git] / arch / arm / mach-ep93xx / simone.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * arch/arm/mach-ep93xx/simone.c
4 * Simplemachines Sim.One support.
5 *
6 * Copyright (C) 2010 Ryan Mallon
7 *
8 * Based on the 2.6.24.7 support:
9 * Copyright (C) 2009 Simplemachines
10 * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
11 */
12
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/i2c.h>
17 #include <linux/mmc/host.h>
18 #include <linux/spi/spi.h>
19 #include <linux/spi/mmc_spi.h>
20 #include <linux/platform_data/video-ep93xx.h>
21 #include <linux/platform_data/spi-ep93xx.h>
22 #include <linux/gpio.h>
23 #include <linux/gpio/machine.h>
24
25 #include "hardware.h"
26 #include "gpio-ep93xx.h"
27
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30
31 #include "soc.h"
32
33 static struct ep93xx_eth_data __initdata simone_eth_data = {
34 .phy_id = 1,
35 };
36
37 static struct ep93xxfb_mach_info __initdata simone_fb_info = {
38 .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
39 };
40
41 static struct mmc_spi_platform_data simone_mmc_spi_data = {
42 .detect_delay = 500,
43 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
44 };
45
46 static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
47 .dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
48 .table = {
49 /* Card detect */
50 GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
51 { },
52 },
53 };
54
55 static struct spi_board_info simone_spi_devices[] __initdata = {
56 {
57 .modalias = "mmc_spi",
58 .platform_data = &simone_mmc_spi_data,
59 /*
60 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
61 * will limit it automatically to max. frequency.
62 */
63 .max_speed_hz = 10 * 1000 * 1000,
64 .bus_num = 0,
65 .chip_select = 0,
66 .mode = SPI_MODE_3,
67 },
68 };
69
70 /*
71 * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
72 * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
73 * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
74 */
75 static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
76 .dev_id = "ep93xx-spi.0",
77 .table = {
78 GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
79 { },
80 },
81 };
82
83 static struct ep93xx_spi_info simone_spi_info __initdata = {
84 .use_dma = 1,
85 };
86
87 static struct i2c_board_info __initdata simone_i2c_board_info[] = {
88 {
89 I2C_BOARD_INFO("ds1337", 0x68),
90 },
91 };
92
93 static struct platform_device simone_audio_device = {
94 .name = "simone-audio",
95 .id = -1,
96 };
97
98 static void __init simone_register_audio(void)
99 {
100 ep93xx_register_ac97();
101 platform_device_register(&simone_audio_device);
102 }
103
104 static void __init simone_init_machine(void)
105 {
106 ep93xx_init_devices();
107 ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
108 ep93xx_register_eth(&simone_eth_data, 1);
109 ep93xx_register_fb(&simone_fb_info);
110 ep93xx_register_i2c(simone_i2c_board_info,
111 ARRAY_SIZE(simone_i2c_board_info));
112 gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
113 gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
114 ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
115 ARRAY_SIZE(simone_spi_devices));
116 simone_register_audio();
117 }
118
119 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
120 /* Maintainer: Ryan Mallon */
121 .atag_offset = 0x100,
122 .map_io = ep93xx_map_io,
123 .init_irq = ep93xx_init_irq,
124 .init_time = ep93xx_timer_init,
125 .init_machine = simone_init_machine,
126 .init_late = ep93xx_init_late,
127 .restart = ep93xx_restart,
128 MACHINE_END