arch/arm/mach-imx/Kconfig

   1 menuconfig ARCH_MXC
   2         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
   3         select ARCH_REQUIRE_GPIOLIB
   4         select ARM_CPU_SUSPEND if PM
   5         select CLKSRC_MMIO
   6         select GENERIC_IRQ_CHIP
   7         select PINCTRL
   8         select PM_OPP if PM
   9         select SOC_BUS
  10         select SRAM
  11         help
  12           Support for Freescale MXC/iMX-based family of processors
  13
  14 if ARCH_MXC
  15
  16 config MXC_TZIC
  17         bool
  18
  19 config MXC_AVIC
  20         bool
  21
  22 config MXC_DEBUG_BOARD
  23         bool "Enable MXC debug board(for 3-stack)"
  24         help
  25           The debug board is an integral part of the MXC 3-stack(PDK)
  26           platforms, it can be attached or removed from the peripheral
  27           board. On debug board, several debug devices(ethernet, UART,
  28           buttons, LEDs and JTAG) are implemented. Between the MCU and
  29           these devices, a CPLD is added as a bridge which performs
  30           data/address de-multiplexing and decode, signal level shift,
  31           interrupt control and various board functions.
  32
  33 config HAVE_EPIT
  34         bool
  35
  36 config MXC_USE_EPIT
  37         bool "Use EPIT instead of GPT"
  38         depends on HAVE_EPIT
  39         help
  40           Use EPIT as the system timer on systems that have it. Normally you
  41           don't have a reason to do so as the EPIT has the same features and
  42           uses the same clocks as the GPT. Anyway, on some systems the GPT
  43           may be in use for other purposes.
  44
  45 config ARCH_HAS_RNGA
  46         bool
  47
  48 config HAVE_IMX_ANATOP
  49         bool
  50
  51 config HAVE_IMX_GPC
  52         bool
  53
  54 config HAVE_IMX_MMDC
  55         bool
  56
  57 config HAVE_IMX_SRC
  58         def_bool y if SMP
  59         select ARCH_HAS_RESET_CONTROLLER
  60
  61 config IMX_HAVE_IOMUX_V1
  62         bool
  63
  64 config ARCH_MXC_IOMUX_V3
  65         bool
  66
  67 config SOC_IMX1
  68         bool
  69         select CPU_ARM920T
  70         select IMX_HAVE_IOMUX_V1
  71         select MXC_AVIC
  72         select PINCTRL_IMX1
  73
  74 config SOC_IMX21
  75         bool
  76         select CPU_ARM926T
  77         select IMX_HAVE_IOMUX_V1
  78         select MXC_AVIC
  79
  80 config SOC_IMX25
  81         bool
  82         select ARCH_MXC_IOMUX_V3
  83         select CPU_ARM926T
  84         select MXC_AVIC
  85         select PINCTRL_IMX25
  86
  87 config SOC_IMX27
  88         bool
  89         select CPU_ARM926T
  90         select IMX_HAVE_IOMUX_V1
  91         select MXC_AVIC
  92         select PINCTRL_IMX27
  93
  94 config SOC_IMX31
  95         bool
  96         select CPU_V6
  97         select IMX_HAVE_PLATFORM_MXC_RNGA
  98         select MXC_AVIC
  99         select SMP_ON_UP if SMP
 100
 101 config SOC_IMX35
 102         bool
 103         select ARCH_MXC_IOMUX_V3
 104         select HAVE_EPIT
 105         select MXC_AVIC
 106         select PINCTRL_IMX35
 107         select SMP_ON_UP if SMP
 108
 109 if ARCH_MULTI_V4T
 110
 111 comment "MX1 platforms:"
 112
 113 config MACH_SCB9328
 114         bool "Synertronixx scb9328"
 115         select IMX_HAVE_PLATFORM_IMX_UART
 116         select SOC_IMX1
 117         help
 118           Say Y here if you are using a Synertronixx scb9328 board
 119
 120 config MACH_APF9328
 121         bool "APF9328"
 122         select IMX_HAVE_PLATFORM_IMX_I2C
 123         select IMX_HAVE_PLATFORM_IMX_UART
 124         select SOC_IMX1
 125         help
 126           Say Yes here if you are using the Armadeus APF9328 development board
 127
 128 config MACH_IMX1_DT
 129         bool "Support i.MX1 platforms from device tree"
 130         select SOC_IMX1
 131         help
 132           Include support for Freescale i.MX1 based platforms
 133           using the device tree for discovery.
 134
 135 endif
 136
 137 if ARCH_MULTI_V5
 138
 139 comment "MX21 platforms:"
 140
 141 config MACH_MX21ADS
 142         bool "MX21ADS platform"
 143         select IMX_HAVE_PLATFORM_IMX_FB
 144         select IMX_HAVE_PLATFORM_IMX_UART
 145         select IMX_HAVE_PLATFORM_MXC_MMC
 146         select IMX_HAVE_PLATFORM_MXC_NAND
 147         select SOC_IMX21
 148         help
 149           Include support for MX21ADS platform. This includes specific
 150           configurations for the board and its peripherals.
 151
 152 comment "MX25 platforms:"
 153
 154 config MACH_MX25_3DS
 155         bool "Support MX25PDK (3DS) Platform"
 156         select IMX_HAVE_PLATFORM_FLEXCAN
 157         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 158         select IMX_HAVE_PLATFORM_IMX2_WDT
 159         select IMX_HAVE_PLATFORM_IMXDI_RTC
 160         select IMX_HAVE_PLATFORM_IMX_FB
 161         select IMX_HAVE_PLATFORM_IMX_I2C
 162         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 163         select IMX_HAVE_PLATFORM_IMX_UART
 164         select IMX_HAVE_PLATFORM_MXC_EHCI
 165         select IMX_HAVE_PLATFORM_MXC_NAND
 166         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 167         select SOC_IMX25
 168
 169 config MACH_EUKREA_CPUIMX25SD
 170         bool "Support Eukrea CPUIMX25 Platform"
 171         select IMX_HAVE_PLATFORM_FLEXCAN
 172         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 173         select IMX_HAVE_PLATFORM_IMX2_WDT
 174         select IMX_HAVE_PLATFORM_IMXDI_RTC
 175         select IMX_HAVE_PLATFORM_IMX_FB
 176         select IMX_HAVE_PLATFORM_IMX_I2C
 177         select IMX_HAVE_PLATFORM_IMX_UART
 178         select IMX_HAVE_PLATFORM_MXC_EHCI
 179         select IMX_HAVE_PLATFORM_MXC_NAND
 180         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 181         select USB_ULPI_VIEWPORT if USB_ULPI
 182         select SOC_IMX25
 183
 184 choice
 185         prompt "Baseboard"
 186         depends on MACH_EUKREA_CPUIMX25SD
 187         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 188
 189 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 190         bool "Eukrea MBIMXSD development board"
 191         select IMX_HAVE_PLATFORM_GPIO_KEYS
 192         select IMX_HAVE_PLATFORM_IMX_SSI
 193         select IMX_HAVE_PLATFORM_SPI_IMX
 194         select LEDS_GPIO_REGISTER
 195         help
 196           This adds board specific devices that can be found on Eukrea's
 197           MBIMXSD evaluation board.
 198
 199 endchoice
 200
 201 config MACH_IMX25_DT
 202         bool "Support i.MX25 platforms from device tree"
 203         select SOC_IMX25
 204         help
 205           Include support for Freescale i.MX25 based platforms
 206           using the device tree for discovery
 207
 208 comment "MX27 platforms:"
 209
 210 config MACH_MX27ADS
 211         bool "MX27ADS platform"
 212         select IMX_HAVE_PLATFORM_IMX_FB
 213         select IMX_HAVE_PLATFORM_IMX_I2C
 214         select IMX_HAVE_PLATFORM_IMX_UART
 215         select IMX_HAVE_PLATFORM_MXC_MMC
 216         select IMX_HAVE_PLATFORM_MXC_NAND
 217         select IMX_HAVE_PLATFORM_MXC_W1
 218         select SOC_IMX27
 219         help
 220           Include support for MX27ADS platform. This includes specific
 221           configurations for the board and its peripherals.
 222
 223 config MACH_MX27_3DS
 224         bool "MX27PDK platform"
 225         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 226         select IMX_HAVE_PLATFORM_IMX2_WDT
 227         select IMX_HAVE_PLATFORM_IMX_FB
 228         select IMX_HAVE_PLATFORM_IMX_I2C
 229         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 230         select IMX_HAVE_PLATFORM_IMX_SSI
 231         select IMX_HAVE_PLATFORM_IMX_UART
 232         select IMX_HAVE_PLATFORM_MX2_CAMERA
 233         select IMX_HAVE_PLATFORM_MXC_EHCI
 234         select IMX_HAVE_PLATFORM_MXC_MMC
 235         select IMX_HAVE_PLATFORM_SPI_IMX
 236         select MXC_DEBUG_BOARD
 237         select USB_ULPI_VIEWPORT if USB_ULPI
 238         select SOC_IMX27
 239         help
 240           Include support for MX27PDK platform. This includes specific
 241           configurations for the board and its peripherals.
 242
 243 config MACH_IMX27_VISSTRIM_M10
 244         bool "Vista Silicon i.MX27 Visstrim_m10"
 245         select IMX_HAVE_PLATFORM_GPIO_KEYS
 246         select IMX_HAVE_PLATFORM_IMX_I2C
 247         select IMX_HAVE_PLATFORM_IMX_SSI
 248         select IMX_HAVE_PLATFORM_IMX_UART
 249         select IMX_HAVE_PLATFORM_MX2_CAMERA
 250         select IMX_HAVE_PLATFORM_MX2_EMMA
 251         select IMX_HAVE_PLATFORM_MXC_EHCI
 252         select IMX_HAVE_PLATFORM_MXC_MMC
 253         select LEDS_GPIO_REGISTER
 254         select SOC_IMX27
 255         help
 256           Include support for Visstrim_m10 platform and its different variants.
 257           This includes specific configurations for the board and its
 258           peripherals.
 259
 260 config MACH_PCA100
 261         bool "Phytec phyCARD-s (pca100)"
 262         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 263         select IMX_HAVE_PLATFORM_IMX2_WDT
 264         select IMX_HAVE_PLATFORM_IMX_FB
 265         select IMX_HAVE_PLATFORM_IMX_I2C
 266         select IMX_HAVE_PLATFORM_IMX_SSI
 267         select IMX_HAVE_PLATFORM_IMX_UART
 268         select IMX_HAVE_PLATFORM_MXC_EHCI
 269         select IMX_HAVE_PLATFORM_MXC_MMC
 270         select IMX_HAVE_PLATFORM_MXC_NAND
 271         select IMX_HAVE_PLATFORM_MXC_W1
 272         select IMX_HAVE_PLATFORM_SPI_IMX
 273         select USB_ULPI_VIEWPORT if USB_ULPI
 274         select SOC_IMX27
 275         help
 276           Include support for phyCARD-s (aka pca100) platform. This
 277           includes specific configurations for the module and its peripherals.
 278
 279 config MACH_IMX27_DT
 280         bool "Support i.MX27 platforms from device tree"
 281         select SOC_IMX27
 282         help
 283           Include support for Freescale i.MX27 based platforms
 284           using the device tree for discovery
 285
 286 endif
 287
 288 if ARCH_MULTI_V6
 289
 290 comment "MX31 platforms:"
 291
 292 config MACH_MX31ADS
 293         bool "Support MX31ADS platforms"
 294         default y
 295         select IMX_HAVE_PLATFORM_IMX_I2C
 296         select IMX_HAVE_PLATFORM_IMX_SSI
 297         select IMX_HAVE_PLATFORM_IMX_UART
 298         select SOC_IMX31
 299         help
 300           Include support for MX31ADS platform. This includes specific
 301           configurations for the board and its peripherals.
 302
 303 config MACH_MX31ADS_WM1133_EV1
 304         bool "Support Wolfson Microelectronics 1133-EV1 module"
 305         depends on MACH_MX31ADS
 306         depends on MFD_WM8350_I2C
 307         depends on REGULATOR_WM8350 = y
 308         help
 309           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 310           and audio module for the MX31ADS platform.
 311
 312 config MACH_MX31LILLY
 313         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 314         select IMX_HAVE_PLATFORM_IMX_UART
 315         select IMX_HAVE_PLATFORM_IPU_CORE
 316         select IMX_HAVE_PLATFORM_MXC_EHCI
 317         select IMX_HAVE_PLATFORM_MXC_MMC
 318         select IMX_HAVE_PLATFORM_SPI_IMX
 319         select USB_ULPI_VIEWPORT if USB_ULPI
 320         select SOC_IMX31
 321         help
 322           Include support for mx31 based LILLY1131 modules. This includes
 323           specific configurations for the board and its peripherals.
 324
 325 config MACH_MX31LITE
 326         bool "Support MX31 LITEKIT (LogicPD)"
 327         select IMX_HAVE_PLATFORM_IMX2_WDT
 328         select IMX_HAVE_PLATFORM_IMX_UART
 329         select IMX_HAVE_PLATFORM_MXC_EHCI
 330         select IMX_HAVE_PLATFORM_MXC_MMC
 331         select IMX_HAVE_PLATFORM_MXC_NAND
 332         select IMX_HAVE_PLATFORM_MXC_RTC
 333         select IMX_HAVE_PLATFORM_SPI_IMX
 334         select LEDS_GPIO_REGISTER
 335         select USB_ULPI_VIEWPORT if USB_ULPI
 336         select SOC_IMX31
 337         help
 338           Include support for MX31 LITEKIT platform. This includes specific
 339           configurations for the board and its peripherals.
 340
 341 config MACH_PCM037
 342         bool "Support Phytec pcm037 (i.MX31) platforms"
 343         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 344         select IMX_HAVE_PLATFORM_IMX2_WDT
 345         select IMX_HAVE_PLATFORM_IMX_I2C
 346         select IMX_HAVE_PLATFORM_IMX_UART
 347         select IMX_HAVE_PLATFORM_IPU_CORE
 348         select IMX_HAVE_PLATFORM_MXC_EHCI
 349         select IMX_HAVE_PLATFORM_MXC_MMC
 350         select IMX_HAVE_PLATFORM_MXC_NAND
 351         select IMX_HAVE_PLATFORM_MXC_W1
 352         select USB_ULPI_VIEWPORT if USB_ULPI
 353         select SOC_IMX31
 354         help
 355           Include support for Phytec pcm037 platform. This includes
 356           specific configurations for the board and its peripherals.
 357
 358 config MACH_PCM037_EET
 359         bool "Support pcm037 EET board extensions"
 360         depends on MACH_PCM037
 361         select IMX_HAVE_PLATFORM_GPIO_KEYS
 362         select IMX_HAVE_PLATFORM_SPI_IMX
 363         help
 364           Add support for PCM037 EET baseboard extensions. If you are using the
 365           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 366           command-line parameter.
 367
 368 config MACH_MX31_3DS
 369         bool "Support MX31PDK (3DS)"
 370         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 371         select IMX_HAVE_PLATFORM_IMX2_WDT
 372         select IMX_HAVE_PLATFORM_IMX_I2C
 373         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 374         select IMX_HAVE_PLATFORM_IMX_SSI
 375         select IMX_HAVE_PLATFORM_IMX_UART
 376         select IMX_HAVE_PLATFORM_IPU_CORE
 377         select IMX_HAVE_PLATFORM_MXC_EHCI
 378         select IMX_HAVE_PLATFORM_MXC_MMC
 379         select IMX_HAVE_PLATFORM_MXC_NAND
 380         select IMX_HAVE_PLATFORM_SPI_IMX
 381         select MXC_DEBUG_BOARD
 382         select USB_ULPI_VIEWPORT if USB_ULPI
 383         select SOC_IMX31
 384         help
 385           Include support for MX31PDK (3DS) platform. This includes specific
 386           configurations for the board and its peripherals.
 387
 388 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 389         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 390         depends on MACH_MX31_3DS
 391         depends on MTD_NAND_MXC
 392         help
 393           Enable this if you want that the MXC NAND driver uses the in flash
 394           Bad Block Table to know what blocks are bad instead of scanning the
 395           entire flash looking for bad block markers.
 396
 397 config MACH_MX31MOBOARD
 398         bool "Support mx31moboard platforms (EPFL Mobots group)"
 399         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 400         select IMX_HAVE_PLATFORM_IMX2_WDT
 401         select IMX_HAVE_PLATFORM_IMX_I2C
 402         select IMX_HAVE_PLATFORM_IMX_SSI
 403         select IMX_HAVE_PLATFORM_IMX_UART
 404         select IMX_HAVE_PLATFORM_IPU_CORE
 405         select IMX_HAVE_PLATFORM_MXC_EHCI
 406         select IMX_HAVE_PLATFORM_MXC_MMC
 407         select IMX_HAVE_PLATFORM_SPI_IMX
 408         select LEDS_GPIO_REGISTER
 409         select USB_ULPI_VIEWPORT if USB_ULPI
 410         select SOC_IMX31
 411         help
 412           Include support for mx31moboard platform. This includes specific
 413           configurations for the board and its peripherals.
 414
 415 config MACH_QONG
 416         bool "Support Dave/DENX QongEVB-LITE platform"
 417         select IMX_HAVE_PLATFORM_IMX2_WDT
 418         select IMX_HAVE_PLATFORM_IMX_UART
 419         select SOC_IMX31
 420         help
 421           Include support for Dave/DENX QongEVB-LITE platform. This includes
 422           specific configurations for the board and its peripherals.
 423
 424 config MACH_ARMADILLO5X0
 425         bool "Support Atmark Armadillo-500 Development Base Board"
 426         select IMX_HAVE_PLATFORM_GPIO_KEYS
 427         select IMX_HAVE_PLATFORM_IMX_I2C
 428         select IMX_HAVE_PLATFORM_IMX_UART
 429         select IMX_HAVE_PLATFORM_IPU_CORE
 430         select IMX_HAVE_PLATFORM_MXC_EHCI
 431         select IMX_HAVE_PLATFORM_MXC_MMC
 432         select IMX_HAVE_PLATFORM_MXC_NAND
 433         select USB_ULPI_VIEWPORT if USB_ULPI
 434         select SOC_IMX31
 435         help
 436           Include support for Atmark Armadillo-500 platform. This includes
 437           specific configurations for the board and its peripherals.
 438
 439 config MACH_KZM_ARM11_01
 440         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 441         select IMX_HAVE_PLATFORM_IMX_UART
 442         select SOC_IMX31
 443         help
 444           Include support for KZM-ARM11-01. This includes specific
 445           configurations for the board and its peripherals.
 446
 447 config MACH_BUG
 448         bool "Support Buglabs BUGBase platform"
 449         default y
 450         select IMX_HAVE_PLATFORM_IMX_UART
 451         select SOC_IMX31
 452         help
 453           Include support for BUGBase 1.3 platform. This includes specific
 454           configurations for the board and its peripherals.
 455
 456 config MACH_IMX31_DT
 457         bool "Support i.MX31 platforms from device tree"
 458         select SOC_IMX31
 459         help
 460           Include support for Freescale i.MX31 based platforms
 461           using the device tree for discovery.
 462
 463 comment "MX35 platforms:"
 464
 465 config MACH_IMX35_DT
 466         bool "Support i.MX35 platforms from device tree"
 467         select SOC_IMX35
 468         help
 469           Include support for Freescale i.MX35 based platforms
 470           using the device tree for discovery.
 471
 472 config MACH_PCM043
 473         bool "Support Phytec pcm043 (i.MX35) platforms"
 474         select IMX_HAVE_PLATFORM_FLEXCAN
 475         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 476         select IMX_HAVE_PLATFORM_IMX2_WDT
 477         select IMX_HAVE_PLATFORM_IMX_I2C
 478         select IMX_HAVE_PLATFORM_IMX_SSI
 479         select IMX_HAVE_PLATFORM_IMX_UART
 480         select IMX_HAVE_PLATFORM_IPU_CORE
 481         select IMX_HAVE_PLATFORM_MXC_EHCI
 482         select IMX_HAVE_PLATFORM_MXC_NAND
 483         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 484         select USB_ULPI_VIEWPORT if USB_ULPI
 485         select SOC_IMX35
 486         help
 487           Include support for Phytec pcm043 platform. This includes
 488           specific configurations for the board and its peripherals.
 489
 490 config MACH_MX35_3DS
 491         bool "Support MX35PDK platform"
 492         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 493         select IMX_HAVE_PLATFORM_IMX2_WDT
 494         select IMX_HAVE_PLATFORM_IMX_FB
 495         select IMX_HAVE_PLATFORM_IMX_I2C
 496         select IMX_HAVE_PLATFORM_IMX_UART
 497         select IMX_HAVE_PLATFORM_IPU_CORE
 498         select IMX_HAVE_PLATFORM_MXC_EHCI
 499         select IMX_HAVE_PLATFORM_MXC_NAND
 500         select IMX_HAVE_PLATFORM_MXC_RTC
 501         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 502         select MXC_DEBUG_BOARD
 503         select SOC_IMX35
 504         help
 505           Include support for MX35PDK platform. This includes specific
 506           configurations for the board and its peripherals.
 507
 508 config MACH_EUKREA_CPUIMX35SD
 509         bool "Support Eukrea CPUIMX35 Platform"
 510         select IMX_HAVE_PLATFORM_FLEXCAN
 511         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 512         select IMX_HAVE_PLATFORM_IMX2_WDT
 513         select IMX_HAVE_PLATFORM_IMX_I2C
 514         select IMX_HAVE_PLATFORM_IMX_UART
 515         select IMX_HAVE_PLATFORM_MXC_EHCI
 516         select IMX_HAVE_PLATFORM_MXC_NAND
 517         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 518         select USB_ULPI_VIEWPORT if USB_ULPI
 519         select SOC_IMX35
 520         help
 521           Include support for Eukrea CPUIMX35 platform. This includes
 522           specific configurations for the board and its peripherals.
 523
 524 choice
 525         prompt "Baseboard"
 526         depends on MACH_EUKREA_CPUIMX35SD
 527         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 528
 529 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 530         bool "Eukrea MBIMXSD development board"
 531         select IMX_HAVE_PLATFORM_GPIO_KEYS
 532         select IMX_HAVE_PLATFORM_IMX_SSI
 533         select IMX_HAVE_PLATFORM_IPU_CORE
 534         select IMX_HAVE_PLATFORM_SPI_IMX
 535         select LEDS_GPIO_REGISTER
 536         help
 537           This adds board specific devices that can be found on Eukrea's
 538           MBIMXSD evaluation board.
 539
 540 endchoice
 541
 542 config MACH_VPR200
 543         bool "Support VPR200 platform"
 544         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 545         select IMX_HAVE_PLATFORM_GPIO_KEYS
 546         select IMX_HAVE_PLATFORM_IMX2_WDT
 547         select IMX_HAVE_PLATFORM_IMX_I2C
 548         select IMX_HAVE_PLATFORM_IMX_UART
 549         select IMX_HAVE_PLATFORM_IPU_CORE
 550         select IMX_HAVE_PLATFORM_MXC_EHCI
 551         select IMX_HAVE_PLATFORM_MXC_NAND
 552         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 553         select SOC_IMX35
 554         help
 555           Include support for VPR200 platform. This includes specific
 556           configurations for the board and its peripherals.
 557
 558 endif
 559
 560 if ARCH_MULTI_V7
 561
 562 comment "Device tree only"
 563
 564 config SOC_IMX5
 565         bool
 566         select HAVE_IMX_SRC
 567         select MXC_TZIC
 568
 569 config  SOC_IMX50
 570         bool "i.MX50 support"
 571         select PINCTRL_IMX50
 572         select SOC_IMX5
 573
 574         help
 575           This enables support for Freescale i.MX50 processor.
 576
 577 config SOC_IMX51
 578         bool "i.MX51 support"
 579         select PINCTRL_IMX51
 580         select SOC_IMX5
 581         help
 582           This enables support for Freescale i.MX51 processor
 583
 584 config  SOC_IMX53
 585         bool "i.MX53 support"
 586         select PINCTRL_IMX53
 587         select SOC_IMX5
 588
 589         help
 590           This enables support for Freescale i.MX53 processor.
 591
 592 config SOC_IMX6
 593         bool
 594         select ARM_ERRATA_754322
 595         select ARM_ERRATA_775420
 596         select ARM_GIC
 597         select HAVE_IMX_ANATOP
 598         select HAVE_IMX_GPC
 599         select HAVE_IMX_MMDC
 600         select HAVE_IMX_SRC
 601         select MFD_SYSCON
 602         select PL310_ERRATA_769419 if CACHE_L2X0
 603
 604 config SOC_IMX6Q
 605         bool "i.MX6 Quad/DualLite support"
 606         select ARM_ERRATA_764369 if SMP
 607         select HAVE_ARM_SCU if SMP
 608         select HAVE_ARM_TWD if SMP
 609         select PCI_DOMAINS if PCI
 610         select PINCTRL_IMX6Q
 611         select SOC_IMX6
 612
 613         help
 614           This enables support for Freescale i.MX6 Quad processor.
 615
 616 config SOC_IMX6SL
 617         bool "i.MX6 SoloLite support"
 618         select PINCTRL_IMX6SL
 619         select SOC_IMX6
 620
 621         help
 622           This enables support for Freescale i.MX6 SoloLite processor.
 623
 624 config SOC_IMX6SX
 625         bool "i.MX6 SoloX support"
 626         select PINCTRL_IMX6SX
 627         select SOC_IMX6
 628
 629         help
 630           This enables support for Freescale i.MX6 SoloX processor.
 631
 632 config SOC_VF610
 633         bool "Vybrid Family VF610 support"
 634         select ARM_GIC
 635         select PINCTRL_VF610
 636         select PL310_ERRATA_769419 if CACHE_L2X0
 637
 638         help
 639           This enable support for Freescale Vybrid VF610 processor.
 640
 641 choice
 642         prompt "Clocksource for scheduler clock"
 643         depends on SOC_VF610
 644         default VF_USE_ARM_GLOBAL_TIMER
 645
 646         config VF_USE_ARM_GLOBAL_TIMER
 647                 bool "Use ARM Global Timer"
 648                 select ARM_GLOBAL_TIMER
 649                 select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 650                 help
 651                   Use the ARM Global Timer as clocksource
 652
 653         config VF_USE_PIT_TIMER
 654                 bool "Use PIT timer"
 655                 select VF_PIT_TIMER
 656                 help
 657                   Use SoC Periodic Interrupt Timer (PIT) as clocksource
 658
 659 endchoice
 660
 661 config SOC_LS1021A
 662         bool "Freescale LS1021A support"
 663         select ARM_GIC
 664         select HAVE_ARM_ARCH_TIMER
 665         select PCI_DOMAINS if PCI
 666         select ZONE_DMA if ARM_LPAE
 667
 668         help
 669           This enable support for Freescale LS1021A processor.
 670
 671 endif
 672
 673 source "arch/arm/mach-imx/devices/Kconfig"
 674
 675 endif