arch/arm/mach-imx/Kconfig

   1 config HAVE_IMX_GPC
   2         bool
   3
   4 config HAVE_IMX_MMDC
   5         bool
   6
   7 config HAVE_IMX_SRC
   8         bool
   9
  10 config ARCH_MX1
  11         bool
  12
  13 config MACH_MX21
  14         bool
  15
  16 config ARCH_MX25
  17         bool
  18
  19 config MACH_MX27
  20         bool
  21
  22 config ARCH_MX5
  23         bool
  24
  25 config ARCH_MX50
  26         bool
  27
  28 config ARCH_MX51
  29         bool
  30
  31 config ARCH_MX53
  32         bool
  33
  34 config SOC_IMX1
  35         bool
  36         select ARCH_MX1
  37         select CPU_ARM920T
  38         select IMX_HAVE_IOMUX_V1
  39         select MXC_AVIC
  40
  41 config SOC_IMX21
  42         bool
  43         select MACH_MX21
  44         select CPU_ARM926T
  45         select IMX_HAVE_IOMUX_V1
  46         select MXC_AVIC
  47
  48 config SOC_IMX25
  49         bool
  50         select ARCH_MX25
  51         select CPU_ARM926T
  52         select ARCH_MXC_IOMUX_V3
  53         select MXC_AVIC
  54
  55 config SOC_IMX27
  56         bool
  57         select MACH_MX27
  58         select CPU_ARM926T
  59         select IMX_HAVE_IOMUX_V1
  60         select MXC_AVIC
  61
  62 config SOC_IMX31
  63         bool
  64         select CPU_V6
  65         select IMX_HAVE_PLATFORM_MXC_RNGA
  66         select MXC_AVIC
  67         select SMP_ON_UP if SMP
  68
  69 config SOC_IMX35
  70         bool
  71         select CPU_V6
  72         select ARCH_MXC_IOMUX_V3
  73         select HAVE_EPIT
  74         select MXC_AVIC
  75         select SMP_ON_UP if SMP
  76
  77 config SOC_IMX5
  78         select CPU_V7
  79         select MXC_TZIC
  80         select ARCH_MXC_IOMUX_V3
  81         select ARCH_HAS_CPUFREQ
  82         select ARCH_MX5
  83         bool
  84
  85 config SOC_IMX50
  86         bool
  87         select SOC_IMX5
  88         select ARCH_MX50
  89
  90 config  SOC_IMX51
  91         bool
  92         select SOC_IMX5
  93         select ARCH_MX5
  94         select ARCH_MX51
  95
  96 config  SOC_IMX53
  97         bool
  98         select SOC_IMX5
  99         select ARCH_MX5
 100         select ARCH_MX53
 101
 102 if ARCH_IMX_V4_V5
 103
 104 comment "MX1 platforms:"
 105 config MACH_MXLADS
 106         bool
 107
 108 config ARCH_MX1ADS
 109         bool "MX1ADS platform"
 110         select MACH_MXLADS
 111         select SOC_IMX1
 112         select IMX_HAVE_PLATFORM_IMX_I2C
 113         select IMX_HAVE_PLATFORM_IMX_UART
 114         help
 115           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 116
 117 config MACH_SCB9328
 118         bool "Synertronixx scb9328"
 119         select IMX_HAVE_PLATFORM_IMX_UART
 120         help
 121           Say Y here if you are using a Synertronixx scb9328 board
 122
 123 config MACH_APF9328
 124         bool "APF9328"
 125         select SOC_IMX1
 126         select IMX_HAVE_PLATFORM_IMX_I2C
 127         select IMX_HAVE_PLATFORM_IMX_UART
 128         help
 129           Say Yes here if you are using the Armadeus APF9328 development board
 130
 131 comment "MX21 platforms:"
 132
 133 config MACH_MX21ADS
 134         bool "MX21ADS platform"
 135         select SOC_IMX21
 136         select IMX_HAVE_PLATFORM_IMX_FB
 137         select IMX_HAVE_PLATFORM_IMX_UART
 138         select IMX_HAVE_PLATFORM_MXC_MMC
 139         select IMX_HAVE_PLATFORM_MXC_NAND
 140         help
 141           Include support for MX21ADS platform. This includes specific
 142           configurations for the board and its peripherals.
 143
 144 comment "MX25 platforms:"
 145
 146 config MACH_MX25_3DS
 147         bool "Support MX25PDK (3DS) Platform"
 148         select SOC_IMX25
 149         select IMX_HAVE_PLATFORM_FLEXCAN
 150         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 151         select IMX_HAVE_PLATFORM_IMX2_WDT
 152         select IMX_HAVE_PLATFORM_IMXDI_RTC
 153         select IMX_HAVE_PLATFORM_IMX_I2C
 154         select IMX_HAVE_PLATFORM_IMX_FB
 155         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 156         select IMX_HAVE_PLATFORM_IMX_UART
 157         select IMX_HAVE_PLATFORM_MXC_EHCI
 158         select IMX_HAVE_PLATFORM_MXC_NAND
 159         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 160
 161 config MACH_EUKREA_CPUIMX25SD
 162         bool "Support Eukrea CPUIMX25 Platform"
 163         select SOC_IMX25
 164         select IMX_HAVE_PLATFORM_FLEXCAN
 165         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 166         select IMX_HAVE_PLATFORM_IMXDI_RTC
 167         select IMX_HAVE_PLATFORM_IMX_FB
 168         select IMX_HAVE_PLATFORM_IMX_I2C
 169         select IMX_HAVE_PLATFORM_IMX_UART
 170         select IMX_HAVE_PLATFORM_MXC_EHCI
 171         select IMX_HAVE_PLATFORM_MXC_NAND
 172         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 173         select MXC_ULPI if USB_ULPI
 174
 175 choice
 176         prompt "Baseboard"
 177         depends on MACH_EUKREA_CPUIMX25SD
 178         default MACH_EUKREA_MBIMXSD25_BASEBOARD
 179
 180 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 181         bool "Eukrea MBIMXSD development board"
 182         select IMX_HAVE_PLATFORM_GPIO_KEYS
 183         select IMX_HAVE_PLATFORM_IMX_SSI
 184         select LEDS_GPIO_REGISTER
 185         help
 186           This adds board specific devices that can be found on Eukrea's
 187           MBIMXSD evaluation board.
 188
 189 endchoice
 190
 191 comment "MX27 platforms:"
 192
 193 config MACH_MX27ADS
 194         bool "MX27ADS platform"
 195         select SOC_IMX27
 196         select IMX_HAVE_PLATFORM_IMX_FB
 197         select IMX_HAVE_PLATFORM_IMX_I2C
 198         select IMX_HAVE_PLATFORM_IMX_UART
 199         select IMX_HAVE_PLATFORM_MXC_MMC
 200         select IMX_HAVE_PLATFORM_MXC_NAND
 201         select IMX_HAVE_PLATFORM_MXC_W1
 202         help
 203           Include support for MX27ADS platform. This includes specific
 204           configurations for the board and its peripherals.
 205
 206 config MACH_PCM038
 207         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 208         select SOC_IMX27
 209         select IMX_HAVE_PLATFORM_IMX2_WDT
 210         select IMX_HAVE_PLATFORM_IMX_I2C
 211         select IMX_HAVE_PLATFORM_IMX_UART
 212         select IMX_HAVE_PLATFORM_MXC_EHCI
 213         select IMX_HAVE_PLATFORM_MXC_NAND
 214         select IMX_HAVE_PLATFORM_MXC_W1
 215         select IMX_HAVE_PLATFORM_SPI_IMX
 216         select MXC_ULPI if USB_ULPI
 217         help
 218           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 219           includes specific configurations for the module and its peripherals.
 220
 221 choice
 222         prompt "Baseboard"
 223         depends on MACH_PCM038
 224         default MACH_PCM970_BASEBOARD
 225
 226 config MACH_PCM970_BASEBOARD
 227         bool "PHYTEC PCM970 development board"
 228         select IMX_HAVE_PLATFORM_IMX_FB
 229         select IMX_HAVE_PLATFORM_MXC_MMC
 230         help
 231           This adds board specific devices that can be found on Phytec's
 232           PCM970 evaluation board.
 233
 234 endchoice
 235
 236 config MACH_CPUIMX27
 237         bool "Eukrea CPUIMX27 module"
 238         select SOC_IMX27
 239         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 240         select IMX_HAVE_PLATFORM_IMX2_WDT
 241         select IMX_HAVE_PLATFORM_IMX_I2C
 242         select IMX_HAVE_PLATFORM_IMX_UART
 243         select IMX_HAVE_PLATFORM_MXC_EHCI
 244         select IMX_HAVE_PLATFORM_MXC_NAND
 245         select IMX_HAVE_PLATFORM_MXC_W1
 246         select MXC_ULPI if USB_ULPI
 247         help
 248           Include support for Eukrea CPUIMX27 platform. This includes
 249           specific configurations for the module and its peripherals.
 250
 251 config MACH_EUKREA_CPUIMX27_USESDHC2
 252         bool "CPUIMX27 integrates SDHC2 module"
 253         depends on MACH_CPUIMX27
 254         select IMX_HAVE_PLATFORM_MXC_MMC
 255         help
 256           This adds support for the internal SDHC2 used on CPUIMX27
 257           for wifi or eMMC.
 258
 259 config MACH_EUKREA_CPUIMX27_USEUART4
 260         bool "CPUIMX27 integrates UART4 module"
 261         depends on MACH_CPUIMX27
 262         help
 263           This adds support for the internal UART4 used on CPUIMX27
 264           for bluetooth.
 265
 266 choice
 267         prompt "Baseboard"
 268         depends on MACH_CPUIMX27
 269         default MACH_EUKREA_MBIMX27_BASEBOARD
 270
 271 config MACH_EUKREA_MBIMX27_BASEBOARD
 272         bool "Eukrea MBIMX27 development board"
 273         select IMX_HAVE_PLATFORM_IMX_FB
 274         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 275         select IMX_HAVE_PLATFORM_IMX_SSI
 276         select IMX_HAVE_PLATFORM_IMX_UART
 277         select IMX_HAVE_PLATFORM_MXC_MMC
 278         select IMX_HAVE_PLATFORM_SPI_IMX
 279         select LEDS_GPIO_REGISTER
 280         help
 281           This adds board specific devices that can be found on Eukrea's
 282           MBIMX27 evaluation board.
 283
 284 endchoice
 285
 286 config MACH_MX27_3DS
 287         bool "MX27PDK platform"
 288         select SOC_IMX27
 289         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 290         select IMX_HAVE_PLATFORM_IMX2_WDT
 291         select IMX_HAVE_PLATFORM_IMX_FB
 292         select IMX_HAVE_PLATFORM_IMX_I2C
 293         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 294         select IMX_HAVE_PLATFORM_IMX_UART
 295         select IMX_HAVE_PLATFORM_MX2_CAMERA
 296         select IMX_HAVE_PLATFORM_MXC_EHCI
 297         select IMX_HAVE_PLATFORM_MXC_MMC
 298         select IMX_HAVE_PLATFORM_SPI_IMX
 299         select MXC_DEBUG_BOARD
 300         select MXC_ULPI if USB_ULPI
 301         help
 302           Include support for MX27PDK platform. This includes specific
 303           configurations for the board and its peripherals.
 304
 305 config MACH_IMX27_VISSTRIM_M10
 306         bool "Vista Silicon i.MX27 Visstrim_m10"
 307         select SOC_IMX27
 308         select IMX_HAVE_PLATFORM_GPIO_KEYS
 309         select IMX_HAVE_PLATFORM_IMX_I2C
 310         select IMX_HAVE_PLATFORM_IMX_SSI
 311         select IMX_HAVE_PLATFORM_IMX_UART
 312         select IMX_HAVE_PLATFORM_MX2_CAMERA
 313         select IMX_HAVE_PLATFORM_MXC_EHCI
 314         select IMX_HAVE_PLATFORM_MXC_MMC
 315         select LEDS_GPIO_REGISTER
 316         help
 317           Include support for Visstrim_m10 platform and its different variants.
 318           This includes specific configurations for the board and its
 319           peripherals.
 320
 321 config MACH_IMX27LITE
 322         bool "LogicPD MX27 LITEKIT platform"
 323         select SOC_IMX27
 324         select IMX_HAVE_PLATFORM_IMX_UART
 325         select IMX_HAVE_PLATFORM_IMX_SSI
 326         help
 327           Include support for MX27 LITEKIT platform. This includes specific
 328           configurations for the board and its peripherals.
 329
 330 config MACH_PCA100
 331         bool "Phytec phyCARD-s (pca100)"
 332         select SOC_IMX27
 333         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 334         select IMX_HAVE_PLATFORM_IMX2_WDT
 335         select IMX_HAVE_PLATFORM_IMX_FB
 336         select IMX_HAVE_PLATFORM_IMX_I2C
 337         select IMX_HAVE_PLATFORM_IMX_SSI
 338         select IMX_HAVE_PLATFORM_IMX_UART
 339         select IMX_HAVE_PLATFORM_MXC_EHCI
 340         select IMX_HAVE_PLATFORM_MXC_MMC
 341         select IMX_HAVE_PLATFORM_MXC_NAND
 342         select IMX_HAVE_PLATFORM_MXC_W1
 343         select IMX_HAVE_PLATFORM_SPI_IMX
 344         select MXC_ULPI if USB_ULPI
 345         help
 346           Include support for phyCARD-s (aka pca100) platform. This
 347           includes specific configurations for the module and its peripherals.
 348
 349 config MACH_MXT_TD60
 350         bool "Maxtrack i-MXT TD60"
 351         select SOC_IMX27
 352         select IMX_HAVE_PLATFORM_IMX_FB
 353         select IMX_HAVE_PLATFORM_IMX_I2C
 354         select IMX_HAVE_PLATFORM_IMX_UART
 355         select IMX_HAVE_PLATFORM_MXC_MMC
 356         select IMX_HAVE_PLATFORM_MXC_NAND
 357         help
 358           Include support for i-MXT (aka td60) platform. This
 359           includes specific configurations for the module and its peripherals.
 360
 361 config MACH_IMX27IPCAM
 362         bool "IMX27 IPCAM platform"
 363         select SOC_IMX27
 364         select IMX_HAVE_PLATFORM_IMX2_WDT
 365         select IMX_HAVE_PLATFORM_IMX_UART
 366         help
 367           Include support for IMX27 IPCAM platform. This includes specific
 368           configurations for the board and its peripherals.
 369
 370 config MACH_IMX27_DT
 371         bool "Support i.MX27 platforms from device tree"
 372         select SOC_IMX27
 373         select USE_OF
 374         help
 375           Include support for Freescale i.MX27 based platforms
 376           using the device tree for discovery
 377
 378 endif
 379
 380 if ARCH_IMX_V6_V7
 381
 382 comment "MX31 platforms:"
 383
 384 config MACH_MX31ADS
 385         bool "Support MX31ADS platforms"
 386         select SOC_IMX31
 387         select IMX_HAVE_PLATFORM_IMX_I2C
 388         select IMX_HAVE_PLATFORM_IMX_SSI
 389         select IMX_HAVE_PLATFORM_IMX_UART
 390         default y
 391         help
 392           Include support for MX31ADS platform. This includes specific
 393           configurations for the board and its peripherals.
 394
 395 config MACH_MX31ADS_WM1133_EV1
 396         bool "Support Wolfson Microelectronics 1133-EV1 module"
 397         depends on MACH_MX31ADS
 398         depends on MFD_WM8350_I2C
 399         depends on REGULATOR_WM8350
 400         select MFD_WM8350_CONFIG_MODE_0
 401         select MFD_WM8352_CONFIG_MODE_0
 402         help
 403           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 404           and audio module for the MX31ADS platform.
 405
 406 config MACH_MX31LILLY
 407         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 408         select SOC_IMX31
 409         select IMX_HAVE_PLATFORM_IMX_UART
 410         select IMX_HAVE_PLATFORM_IPU_CORE
 411         select IMX_HAVE_PLATFORM_MXC_EHCI
 412         select IMX_HAVE_PLATFORM_MXC_MMC
 413         select IMX_HAVE_PLATFORM_SPI_IMX
 414         select MXC_ULPI if USB_ULPI
 415         help
 416           Include support for mx31 based LILLY1131 modules. This includes
 417           specific configurations for the board and its peripherals.
 418
 419 config MACH_MX31LITE
 420         bool "Support MX31 LITEKIT (LogicPD)"
 421         select SOC_IMX31
 422         select MXC_ULPI if USB_ULPI
 423         select IMX_HAVE_PLATFORM_IMX2_WDT
 424         select IMX_HAVE_PLATFORM_IMX_UART
 425         select IMX_HAVE_PLATFORM_MXC_EHCI
 426         select IMX_HAVE_PLATFORM_MXC_MMC
 427         select IMX_HAVE_PLATFORM_MXC_NAND
 428         select IMX_HAVE_PLATFORM_MXC_RTC
 429         select IMX_HAVE_PLATFORM_SPI_IMX
 430         select LEDS_GPIO_REGISTER
 431         help
 432           Include support for MX31 LITEKIT platform. This includes specific
 433           configurations for the board and its peripherals.
 434
 435 config MACH_PCM037
 436         bool "Support Phytec pcm037 (i.MX31) platforms"
 437         select SOC_IMX31
 438         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 439         select IMX_HAVE_PLATFORM_IMX2_WDT
 440         select IMX_HAVE_PLATFORM_IMX_I2C
 441         select IMX_HAVE_PLATFORM_IMX_UART
 442         select IMX_HAVE_PLATFORM_IPU_CORE
 443         select IMX_HAVE_PLATFORM_MXC_EHCI
 444         select IMX_HAVE_PLATFORM_MXC_MMC
 445         select IMX_HAVE_PLATFORM_MXC_NAND
 446         select IMX_HAVE_PLATFORM_MXC_W1
 447         select MXC_ULPI if USB_ULPI
 448         help
 449           Include support for Phytec pcm037 platform. This includes
 450           specific configurations for the board and its peripherals.
 451
 452 config MACH_PCM037_EET
 453         bool "Support pcm037 EET board extensions"
 454         depends on MACH_PCM037
 455         select IMX_HAVE_PLATFORM_GPIO_KEYS
 456         select IMX_HAVE_PLATFORM_SPI_IMX
 457         help
 458           Add support for PCM037 EET baseboard extensions. If you are using the
 459           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 460           command-line parameter.
 461
 462 config MACH_MX31_3DS
 463         bool "Support MX31PDK (3DS)"
 464         select SOC_IMX31
 465         select MXC_DEBUG_BOARD
 466         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 467         select IMX_HAVE_PLATFORM_IMX2_WDT
 468         select IMX_HAVE_PLATFORM_IMX_I2C
 469         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 470         select IMX_HAVE_PLATFORM_IMX_UART
 471         select IMX_HAVE_PLATFORM_IPU_CORE
 472         select IMX_HAVE_PLATFORM_MXC_EHCI
 473         select IMX_HAVE_PLATFORM_MXC_MMC
 474         select IMX_HAVE_PLATFORM_MXC_NAND
 475         select IMX_HAVE_PLATFORM_SPI_IMX
 476         select MXC_ULPI if USB_ULPI
 477         help
 478           Include support for MX31PDK (3DS) platform. This includes specific
 479           configurations for the board and its peripherals.
 480
 481 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 482         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 483         depends on MACH_MX31_3DS
 484         depends on MTD_NAND_MXC
 485         help
 486           Enable this if you want that the MXC NAND driver uses the in flash
 487           Bad Block Table to know what blocks are bad instead of scanning the
 488           entire flash looking for bad block markers.
 489
 490 config MACH_MX31MOBOARD
 491         bool "Support mx31moboard platforms (EPFL Mobots group)"
 492         select SOC_IMX31
 493         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 494         select IMX_HAVE_PLATFORM_IMX2_WDT
 495         select IMX_HAVE_PLATFORM_IMX_I2C
 496         select IMX_HAVE_PLATFORM_IMX_UART
 497         select IMX_HAVE_PLATFORM_IPU_CORE
 498         select IMX_HAVE_PLATFORM_MXC_EHCI
 499         select IMX_HAVE_PLATFORM_MXC_MMC
 500         select IMX_HAVE_PLATFORM_SPI_IMX
 501         select LEDS_GPIO_REGISTER
 502         select MXC_ULPI if USB_ULPI
 503         help
 504           Include support for mx31moboard platform. This includes specific
 505           configurations for the board and its peripherals.
 506
 507 config MACH_QONG
 508         bool "Support Dave/DENX QongEVB-LITE platform"
 509         select SOC_IMX31
 510         select IMX_HAVE_PLATFORM_IMX_UART
 511         select IMX_HAVE_PLATFORM_IMX2_WDT
 512         help
 513           Include support for Dave/DENX QongEVB-LITE platform. This includes
 514           specific configurations for the board and its peripherals.
 515
 516 config MACH_ARMADILLO5X0
 517         bool "Support Atmark Armadillo-500 Development Base Board"
 518         select SOC_IMX31
 519         select IMX_HAVE_PLATFORM_GPIO_KEYS
 520         select IMX_HAVE_PLATFORM_IMX_I2C
 521         select IMX_HAVE_PLATFORM_IMX_UART
 522         select IMX_HAVE_PLATFORM_IPU_CORE
 523         select IMX_HAVE_PLATFORM_MXC_EHCI
 524         select IMX_HAVE_PLATFORM_MXC_MMC
 525         select IMX_HAVE_PLATFORM_MXC_NAND
 526         select MXC_ULPI if USB_ULPI
 527         help
 528           Include support for Atmark Armadillo-500 platform. This includes
 529           specific configurations for the board and its peripherals.
 530
 531 config MACH_KZM_ARM11_01
 532         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 533         select SOC_IMX31
 534         select IMX_HAVE_PLATFORM_IMX_UART
 535         help
 536           Include support for KZM-ARM11-01. This includes specific
 537           configurations for the board and its peripherals.
 538
 539 config MACH_BUG
 540         bool "Support Buglabs BUGBase platform"
 541         select SOC_IMX31
 542         select IMX_HAVE_PLATFORM_IMX_UART
 543         default y
 544         help
 545           Include support for BUGBase 1.3 platform. This includes specific
 546           configurations for the board and its peripherals.
 547
 548 comment "MX35 platforms:"
 549
 550 config MACH_PCM043
 551         bool "Support Phytec pcm043 (i.MX35) platforms"
 552         select SOC_IMX35
 553         select IMX_HAVE_PLATFORM_FLEXCAN
 554         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 555         select IMX_HAVE_PLATFORM_IMX2_WDT
 556         select IMX_HAVE_PLATFORM_IMX_I2C
 557         select IMX_HAVE_PLATFORM_IMX_SSI
 558         select IMX_HAVE_PLATFORM_IMX_UART
 559         select IMX_HAVE_PLATFORM_IPU_CORE
 560         select IMX_HAVE_PLATFORM_MXC_EHCI
 561         select IMX_HAVE_PLATFORM_MXC_NAND
 562         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 563         select MXC_ULPI if USB_ULPI
 564         help
 565           Include support for Phytec pcm043 platform. This includes
 566           specific configurations for the board and its peripherals.
 567
 568 config MACH_MX35_3DS
 569         bool "Support MX35PDK platform"
 570         select SOC_IMX35
 571         select MXC_DEBUG_BOARD
 572         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 573         select IMX_HAVE_PLATFORM_IMX2_WDT
 574         select IMX_HAVE_PLATFORM_IMX_I2C
 575         select IMX_HAVE_PLATFORM_IMX_UART
 576         select IMX_HAVE_PLATFORM_MXC_EHCI
 577         select IMX_HAVE_PLATFORM_MXC_NAND
 578         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 579         help
 580           Include support for MX35PDK platform. This includes specific
 581           configurations for the board and its peripherals.
 582
 583 config MACH_EUKREA_CPUIMX35SD
 584         bool "Support Eukrea CPUIMX35 Platform"
 585         select SOC_IMX35
 586         select IMX_HAVE_PLATFORM_FLEXCAN
 587         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 588         select IMX_HAVE_PLATFORM_IMX2_WDT
 589         select IMX_HAVE_PLATFORM_IMX_I2C
 590         select IMX_HAVE_PLATFORM_IMX_UART
 591         select IMX_HAVE_PLATFORM_MXC_EHCI
 592         select IMX_HAVE_PLATFORM_MXC_NAND
 593         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 594         select MXC_ULPI if USB_ULPI
 595         help
 596           Include support for Eukrea CPUIMX35 platform. This includes
 597           specific configurations for the board and its peripherals.
 598
 599 choice
 600         prompt "Baseboard"
 601         depends on MACH_EUKREA_CPUIMX35SD
 602         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 603
 604 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 605         bool "Eukrea MBIMXSD development board"
 606         select IMX_HAVE_PLATFORM_GPIO_KEYS
 607         select IMX_HAVE_PLATFORM_IMX_SSI
 608         select IMX_HAVE_PLATFORM_IPU_CORE
 609         select LEDS_GPIO_REGISTER
 610         help
 611           This adds board specific devices that can be found on Eukrea's
 612           MBIMXSD evaluation board.
 613
 614 endchoice
 615
 616 config MACH_VPR200
 617         bool "Support VPR200 platform"
 618         select SOC_IMX35
 619         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 620         select IMX_HAVE_PLATFORM_GPIO_KEYS
 621         select IMX_HAVE_PLATFORM_IMX2_WDT
 622         select IMX_HAVE_PLATFORM_IMX_UART
 623         select IMX_HAVE_PLATFORM_IMX_I2C
 624         select IMX_HAVE_PLATFORM_IPU_CORE
 625         select IMX_HAVE_PLATFORM_MXC_EHCI
 626         select IMX_HAVE_PLATFORM_MXC_NAND
 627         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 628         help
 629           Include support for VPR200 platform. This includes specific
 630           configurations for the board and its peripherals.
 631
 632 comment "i.MX5 platforms:"
 633
 634 config MACH_MX50_RDP
 635         bool "Support MX50 reference design platform"
 636         depends on BROKEN
 637         select SOC_IMX50
 638         select IMX_HAVE_PLATFORM_IMX_I2C
 639         select IMX_HAVE_PLATFORM_IMX_UART
 640         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 641         select IMX_HAVE_PLATFORM_SPI_IMX
 642         help
 643           Include support for MX50 reference design platform (RDP) board. This
 644           includes specific configurations for the board and its peripherals.
 645
 646 comment "i.MX51 machines:"
 647
 648 config MACH_IMX51_DT
 649         bool "Support i.MX51 platforms from device tree"
 650         select SOC_IMX51
 651         select USE_OF
 652         select MACH_MX51_BABBAGE
 653         help
 654           Include support for Freescale i.MX51 based platforms
 655           using the device tree for discovery
 656
 657 config MACH_MX51_BABBAGE
 658         bool "Support MX51 BABBAGE platforms"
 659         select SOC_IMX51
 660         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 661         select IMX_HAVE_PLATFORM_IMX2_WDT
 662         select IMX_HAVE_PLATFORM_IMX_I2C
 663         select IMX_HAVE_PLATFORM_IMX_UART
 664         select IMX_HAVE_PLATFORM_MXC_EHCI
 665         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 666         select IMX_HAVE_PLATFORM_SPI_IMX
 667         help
 668           Include support for MX51 Babbage platform, also known as MX51EVK in
 669           u-boot. This includes specific configurations for the board and its
 670           peripherals.
 671
 672 config MACH_MX51_3DS
 673         bool "Support MX51PDK (3DS)"
 674         select SOC_IMX51
 675         select IMX_HAVE_PLATFORM_IMX2_WDT
 676         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 677         select IMX_HAVE_PLATFORM_IMX_UART
 678         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 679         select IMX_HAVE_PLATFORM_SPI_IMX
 680         select MXC_DEBUG_BOARD
 681         help
 682           Include support for MX51PDK (3DS) platform. This includes specific
 683           configurations for the board and its peripherals.
 684
 685 config MACH_EUKREA_CPUIMX51
 686         bool "Support Eukrea CPUIMX51 module"
 687         select SOC_IMX51
 688         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 689         select IMX_HAVE_PLATFORM_IMX_I2C
 690         select IMX_HAVE_PLATFORM_IMX_UART
 691         select IMX_HAVE_PLATFORM_MXC_EHCI
 692         select IMX_HAVE_PLATFORM_MXC_NAND
 693         select IMX_HAVE_PLATFORM_SPI_IMX
 694         help
 695           Include support for Eukrea CPUIMX51 platform. This includes
 696           specific configurations for the module and its peripherals.
 697
 698 choice
 699         prompt "Baseboard"
 700         depends on MACH_EUKREA_CPUIMX51
 701         default MACH_EUKREA_MBIMX51_BASEBOARD
 702
 703 config MACH_EUKREA_MBIMX51_BASEBOARD
 704         prompt "Eukrea MBIMX51 development board"
 705         bool
 706         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 707         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 708         select LEDS_GPIO_REGISTER
 709         help
 710           This adds board specific devices that can be found on Eukrea's
 711           MBIMX51 evaluation board.
 712
 713 endchoice
 714
 715 config MACH_EUKREA_CPUIMX51SD
 716         bool "Support Eukrea CPUIMX51SD module"
 717         select SOC_IMX51
 718         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 719         select IMX_HAVE_PLATFORM_IMX_I2C
 720         select IMX_HAVE_PLATFORM_IMX_UART
 721         select IMX_HAVE_PLATFORM_MXC_EHCI
 722         select IMX_HAVE_PLATFORM_MXC_NAND
 723         select IMX_HAVE_PLATFORM_SPI_IMX
 724         help
 725           Include support for Eukrea CPUIMX51SD platform. This includes
 726           specific configurations for the module and its peripherals.
 727
 728 choice
 729         prompt "Baseboard"
 730         depends on MACH_EUKREA_CPUIMX51SD
 731         default MACH_EUKREA_MBIMXSD51_BASEBOARD
 732
 733 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 734         prompt "Eukrea MBIMXSD development board"
 735         bool
 736         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 737         select LEDS_GPIO_REGISTER
 738         help
 739           This adds board specific devices that can be found on Eukrea's
 740           MBIMXSD evaluation board.
 741
 742 endchoice
 743
 744 config MX51_EFIKA_COMMON
 745         bool
 746         select SOC_IMX51
 747         select IMX_HAVE_PLATFORM_IMX_UART
 748         select IMX_HAVE_PLATFORM_MXC_EHCI
 749         select IMX_HAVE_PLATFORM_PATA_IMX
 750         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 751         select IMX_HAVE_PLATFORM_SPI_IMX
 752         select MXC_ULPI if USB_ULPI
 753
 754 config MACH_MX51_EFIKAMX
 755         bool "Support MX51 Genesi Efika MX nettop"
 756         select LEDS_GPIO_REGISTER
 757         select MX51_EFIKA_COMMON
 758         help
 759           Include support for Genesi Efika MX nettop. This includes specific
 760           configurations for the board and its peripherals.
 761
 762 config MACH_MX51_EFIKASB
 763         bool "Support MX51 Genesi Efika Smartbook"
 764         select LEDS_GPIO_REGISTER
 765         select MX51_EFIKA_COMMON
 766         help
 767           Include support for Genesi Efika Smartbook. This includes specific
 768           configurations for the board and its peripherals.
 769
 770 comment "i.MX53 machines:"
 771
 772 config MACH_IMX53_DT
 773         bool "Support i.MX53 platforms from device tree"
 774         select SOC_IMX53
 775         select USE_OF
 776         select MACH_MX53_ARD
 777         select MACH_MX53_EVK
 778         select MACH_MX53_LOCO
 779         select MACH_MX53_SMD
 780         help
 781           Include support for Freescale i.MX53 based platforms
 782           using the device tree for discovery
 783
 784 config MACH_MX53_EVK
 785         bool "Support MX53 EVK platforms"
 786         select SOC_IMX53
 787         select IMX_HAVE_PLATFORM_IMX2_WDT
 788         select IMX_HAVE_PLATFORM_IMX_UART
 789         select IMX_HAVE_PLATFORM_IMX_I2C
 790         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 791         select IMX_HAVE_PLATFORM_SPI_IMX
 792         select LEDS_GPIO_REGISTER
 793         help
 794           Include support for MX53 EVK platform. This includes specific
 795           configurations for the board and its peripherals.
 796
 797 config MACH_MX53_SMD
 798         bool "Support MX53 SMD platforms"
 799         select SOC_IMX53
 800         select IMX_HAVE_PLATFORM_IMX2_WDT
 801         select IMX_HAVE_PLATFORM_IMX_I2C
 802         select IMX_HAVE_PLATFORM_IMX_UART
 803         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 804         help
 805           Include support for MX53 SMD platform. This includes specific
 806           configurations for the board and its peripherals.
 807
 808 config MACH_MX53_LOCO
 809         bool "Support MX53 LOCO platforms"
 810         select SOC_IMX53
 811         select IMX_HAVE_PLATFORM_IMX2_WDT
 812         select IMX_HAVE_PLATFORM_IMX_I2C
 813         select IMX_HAVE_PLATFORM_IMX_UART
 814         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 815         select IMX_HAVE_PLATFORM_GPIO_KEYS
 816         select LEDS_GPIO_REGISTER
 817         help
 818           Include support for MX53 LOCO platform. This includes specific
 819           configurations for the board and its peripherals.
 820
 821 config MACH_MX53_ARD
 822         bool "Support MX53 ARD platforms"
 823         select SOC_IMX53
 824         select IMX_HAVE_PLATFORM_IMX2_WDT
 825         select IMX_HAVE_PLATFORM_IMX_I2C
 826         select IMX_HAVE_PLATFORM_IMX_UART
 827         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 828         select IMX_HAVE_PLATFORM_GPIO_KEYS
 829         help
 830           Include support for MX53 ARD platform. This includes specific
 831           configurations for the board and its peripherals.
 832
 833 comment "i.MX6 family:"
 834
 835 config SOC_IMX6Q
 836         bool "i.MX6 Quad support"
 837         select ARM_CPU_SUSPEND if PM
 838         select ARM_GIC
 839         select CPU_V7
 840         select HAVE_ARM_SCU
 841         select HAVE_IMX_GPC
 842         select HAVE_IMX_MMDC
 843         select HAVE_IMX_SRC
 844         select HAVE_SMP
 845         select USE_OF
 846
 847         help
 848           This enables support for Freescale i.MX6 Quad processor.
 849
 850 endif