arch/arm/mach-imx/mm-imx3.c

   1 /*
   2  *  Copyright (C) 1999,2000 Arm Limited
   3  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   4  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
   5  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
   6  *    - add MX31 specific definitions
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  */
  18
  19 #include <linux/mm.h>
  20 #include <linux/init.h>
  21 #include <linux/err.h>
  22
  23 #include <asm/pgtable.h>
  24 #include <asm/hardware/cache-l2x0.h>
  25 #include <asm/mach/map.h>
  26
  27 #include <mach/common.h>
  28 #include <mach/devices-common.h>
  29 #include <mach/hardware.h>
  30 #include <mach/iomux-v3.h>
  31 #include <mach/irqs.h>
  32
  33 static void imx3_idle(void)
  34 {
  35         unsigned long reg = 0;
  36
  37         mx3_cpu_lp_set(MX3_WAIT);
  38
  39         __asm__ __volatile__(
  40                 /* disable I and D cache */
  41                 "mrc p15, 0, %0, c1, c0, 0\n"
  42                 "bic %0, %0, #0x00001000\n"
  43                 "bic %0, %0, #0x00000004\n"
  44                 "mcr p15, 0, %0, c1, c0, 0\n"
  45                 /* invalidate I cache */
  46                 "mov %0, #0\n"
  47                 "mcr p15, 0, %0, c7, c5, 0\n"
  48                 /* clear and invalidate D cache */
  49                 "mov %0, #0\n"
  50                 "mcr p15, 0, %0, c7, c14, 0\n"
  51                 /* WFI */
  52                 "mov %0, #0\n"
  53                 "mcr p15, 0, %0, c7, c0, 4\n"
  54                 "nop\n" "nop\n" "nop\n" "nop\n"
  55                 "nop\n" "nop\n" "nop\n"
  56                 /* enable I and D cache */
  57                 "mrc p15, 0, %0, c1, c0, 0\n"
  58                 "orr %0, %0, #0x00001000\n"
  59                 "orr %0, %0, #0x00000004\n"
  60                 "mcr p15, 0, %0, c1, c0, 0\n"
  61                 : "=r" (reg));
  62 }
  63
  64 static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
  65                                          unsigned int mtype, void *caller)
  66 {
  67         if (mtype == MT_DEVICE) {
  68                 /*
  69                  * Access all peripherals below 0x80000000 as nonshared device
  70                  * on mx3, but leave l2cc alone.  Otherwise cache corruptions
  71                  * can occur.
  72                  */
  73                 if (phys_addr < 0x80000000 &&
  74                                 !addr_in_module(phys_addr, MX3x_L2CC))
  75                         mtype = MT_DEVICE_NONSHARED;
  76         }
  77
  78         return __arm_ioremap_caller(phys_addr, size, mtype, caller);
  79 }
  80
  81 void __init imx3_init_l2x0(void)
  82 {
  83         void __iomem *l2x0_base;
  84         void __iomem *clkctl_base;
  85
  86 /*
  87  * First of all, we must repair broken chip settings. There are some
  88  * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
  89  * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
  90  * Workaraound is to setup the correct register setting prior enabling the
  91  * L2 cache. This should not hurt already working CPUs, as they are using the
  92  * same value.
  93  */
  94 #define L2_MEM_VAL 0x10
  95
  96         clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
  97         if (clkctl_base != NULL) {
  98                 writel(0x00000515, clkctl_base + L2_MEM_VAL);
  99                 iounmap(clkctl_base);
 100         } else {
 101                 pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
 102         }
 103
 104         l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
 105         if (IS_ERR(l2x0_base)) {
 106                 printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
 107                                 PTR_ERR(l2x0_base));
 108                 return;
 109         }
 110
 111         l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 112 }
 113
 114 #ifdef CONFIG_SOC_IMX31
 115 static struct map_desc mx31_io_desc[] __initdata = {
 116         imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 117         imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
 118         imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
 119         imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
 120         imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
 121 };
 122
 123 /*
 124  * This function initializes the memory map. It is called during the
 125  * system startup to create static physical to virtual memory mappings
 126  * for the IO modules.
 127  */
 128 void __init mx31_map_io(void)
 129 {
 130         iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 131 }
 132
 133 void __init imx31_init_early(void)
 134 {
 135         mxc_set_cpu_type(MXC_CPU_MX31);
 136         mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 137         arch_ioremap_caller = imx3_ioremap_caller;
 138         arm_pm_idle = imx3_idle;
 139 }
 140
 141 void __init mx31_init_irq(void)
 142 {
 143         mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 144 }
 145
 146 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
 147         .per_2_per_addr = 1677,
 148 };
 149
 150 static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
 151         .ap_2_ap_addr = 423,
 152         .ap_2_bp_addr = 829,
 153         .bp_2_ap_addr = 1029,
 154 };
 155
 156 static struct sdma_platform_data imx31_sdma_pdata __initdata = {
 157         .fw_name = "sdma-imx31-to2.bin",
 158         .script_addrs = &imx31_to2_sdma_script,
 159 };
 160
 161 static const struct resource imx31_audmux_res[] __initconst = {
 162         DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
 163 };
 164
 165 void __init imx31_soc_init(void)
 166 {
 167         int to_version = mx31_revision() >> 4;
 168
 169         imx3_init_l2x0();
 170
 171         mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
 172         mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
 173         mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
 174
 175         if (to_version == 1) {
 176                 strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
 177                         strlen(imx31_sdma_pdata.fw_name));
 178                 imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
 179         }
 180
 181         imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
 182
 183         imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
 184         imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
 185
 186         platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
 187                                         ARRAY_SIZE(imx31_audmux_res));
 188 }
 189 #endif /* ifdef CONFIG_SOC_IMX31 */
 190
 191 #ifdef CONFIG_SOC_IMX35
 192 static struct map_desc mx35_io_desc[] __initdata = {
 193         imx_map_entry(MX35, X_MEMC, MT_DEVICE),
 194         imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
 195         imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
 196         imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
 197         imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
 198 };
 199
 200 void __init mx35_map_io(void)
 201 {
 202         iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 203 }
 204
 205 void __init imx35_init_early(void)
 206 {
 207         mxc_set_cpu_type(MXC_CPU_MX35);
 208         mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 209         mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 210         arm_pm_idle = imx3_idle;
 211         arch_ioremap_caller = imx3_ioremap_caller;
 212 }
 213
 214 void __init mx35_init_irq(void)
 215 {
 216         mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
 217 }
 218
 219 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 220         .ap_2_ap_addr = 642,
 221         .uart_2_mcu_addr = 817,
 222         .mcu_2_app_addr = 747,
 223         .uartsh_2_mcu_addr = 1183,
 224         .per_2_shp_addr = 1033,
 225         .mcu_2_shp_addr = 961,
 226         .ata_2_mcu_addr = 1333,
 227         .mcu_2_ata_addr = 1252,
 228         .app_2_mcu_addr = 683,
 229         .shp_2_per_addr = 1111,
 230         .shp_2_mcu_addr = 892,
 231 };
 232
 233 static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
 234         .ap_2_ap_addr = 729,
 235         .uart_2_mcu_addr = 904,
 236         .per_2_app_addr = 1597,
 237         .mcu_2_app_addr = 834,
 238         .uartsh_2_mcu_addr = 1270,
 239         .per_2_shp_addr = 1120,
 240         .mcu_2_shp_addr = 1048,
 241         .ata_2_mcu_addr = 1429,
 242         .mcu_2_ata_addr = 1339,
 243         .app_2_per_addr = 1531,
 244         .app_2_mcu_addr = 770,
 245         .shp_2_per_addr = 1198,
 246         .shp_2_mcu_addr = 979,
 247 };
 248
 249 static struct sdma_platform_data imx35_sdma_pdata __initdata = {
 250         .fw_name = "sdma-imx35-to2.bin",
 251         .script_addrs = &imx35_to2_sdma_script,
 252 };
 253
 254 static const struct resource imx35_audmux_res[] __initconst = {
 255         DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
 256 };
 257
 258 void __init imx35_soc_init(void)
 259 {
 260         int to_version = mx35_revision() >> 4;
 261
 262         imx3_init_l2x0();
 263
 264         /* i.mx35 has the i.mx31 type gpio */
 265         mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
 266         mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 267         mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 268
 269         if (to_version == 1) {
 270                 strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
 271                         strlen(imx35_sdma_pdata.fw_name));
 272                 imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
 273         }
 274
 275         imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 276
 277         /* Setup AIPS registers */
 278         imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
 279         imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
 280
 281         /* i.mx35 has the i.mx31 type audmux */
 282         platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
 283                                         ARRAY_SIZE(imx35_audmux_res));
 284 }
 285 #endif /* ifdef CONFIG_SOC_IMX35 */