1 # SPDX-License-Identifier: GPL-2.0-only
4 menu "Intel IXP4xx Implementation Options"
6 comment "IXP4xx Platforms"
10 prompt "Devce Tree IXP4xx boards"
12 select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
16 select SERIAL_OF_PLATFORM
20 Say 'Y' here to support Device Tree-based IXP4xx platforms.
24 prompt "Linksys NSLU2"
27 Say 'Y' here if you want your kernel to support Linksys's
28 NSLU2 NAS device. For more information on this platform,
29 see http://www.nslu2-linux.org
35 Say 'Y' here if you want your kernel to support the Gateworks
36 Avila Network Platform. For more information on this platform,
37 see <file:Documentation/arm/IXP4xx>.
43 Say 'Y' here if you want your kernel to support the Giant
44 Shoulder Inc Loft board (a minor variation on the standard
45 Gateworks Avila Network Platform).
47 config ARCH_ADI_COYOTE
51 Say 'Y' here if you want your kernel to support the ADI
52 Engineering Coyote Gateway Reference Platform. For more
53 information on this platform, see <file:Documentation/arm/IXP4xx>.
55 config MACH_GATEWAY7001
59 Say 'Y' here if you want your kernel to support Gateway's
60 7001 Access Point. For more information on this platform,
61 see http://openwrt.org
64 bool "Netgear WG302 v2 / WAG302 v2"
67 Say 'Y' here if you want your kernel to support Netgear's
68 WG302 v2 or WAG302 v2 Access Points. For more information
69 on this platform, see http://openwrt.org
74 Say 'Y' here if you want your kernel to support Intel's
75 IXDP425 Development Platform (Also known as Richfield).
76 For more information on this platform, see <file:Documentation/arm/IXP4xx>.
81 Say 'Y' here if you want your kernel to support Intel's
82 IXDPG425 Development Platform (Also known as Montajade).
83 For more information on this platform, see <file:Documentation/arm/IXP4xx>.
88 Say 'Y' here if you want your kernel to support Intel's
89 IXDP465 Development Platform (Also known as BMP).
90 For more information on this platform, see <file:Documentation/arm/IXP4xx>.
92 config MACH_GORAMO_MLR
93 bool "GORAMO Multi Link Router"
95 Say 'Y' here if you want your kernel to support GORAMO
101 Say 'Y' here if you want your kernel to support Intel's
102 KIXRP435 Reference Platform.
103 For more information on this platform, see <file:Documentation/arm/IXP4xx>.
106 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine
107 # number from the bootloader due to marketing monkeys, so we just enable it
108 # by default if IXDP425 is enabled.
110 config ARCH_IXCDP1100
112 depends on ARCH_IXDP425
115 config ARCH_PRPMC1100
118 Say 'Y' here if you want your kernel to support the Motorola
119 PrPCM1100 Processor Mezanine Module. For more information on
120 this platform, see <file:Documentation/arm/IXP4xx>.
127 Say 'Y' here if you want your kernel to support Iomega's
128 NAS 100d device. For more information on this platform,
129 see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
133 prompt "D-Link DSM-G600 RevA"
136 Say 'Y' here if you want your kernel to support D-Link's
137 DSM-G600 RevA device. For more information on this platform,
138 see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
142 depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
147 prompt "Freecom FSG-3"
150 Say 'Y' here if you want your kernel to support Freecom's
151 FSG-3 device. For more information on this platform,
152 see http://www.nslu2-linux.org/wiki/FSG3/HomePage
154 config MACH_ARCOM_VULCAN
156 prompt "Arcom/Eurotech Vulcan"
159 Say 'Y' here if you want your kernel to support Arcom's
163 # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
167 depends on MACH_IXDP465
172 depends on MACH_KIXRP435
176 bool "Gemtek WX5715 (Linksys WRV54G)"
177 depends on ARCH_IXP4XX
180 This board is currently inside the Linksys WRV54G Gateways.
185 miniPCI slot 0 does not have a card connector soldered to the board
186 miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
187 npe0 is connected to a Kendin KS8995M Switch (4 ports)
188 npe1 is the "wan" port
189 "Console" UART is available on J11 as console
190 "High Speed" UART is n/c (as far as I can tell)
191 20 Pin ARM/Xscale JTAG interface on J2
194 bool "Omicron DEVIXP"
196 Say 'Y' here if you want your kernel to support the DEVIXP
197 board from OMICRON electronics GmbH.
200 bool "Omicron MICCPT"
203 Say 'Y' here if you want your kernel to support the MICCPT
204 board from OMICRON electronics GmbH.
207 bool "Omicron MIC256"
209 Say 'Y' here if you want your kernel to support the MIC256
210 board from OMICRON electronics GmbH.
212 comment "IXP4xx Options"
214 config IXP4XX_INDIRECT_PCI
215 bool "Use indirect PCI memory access"
218 IXP4xx provides two methods of accessing PCI memory space:
220 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
221 To access PCI via this space, we simply ioremap() the BAR
222 into the kernel and we can use the standard read[bwl]/write[bwl]
223 macros. This is the preferred method due to speed but it
224 limits the system to just 64MB of PCI memory. This can be
225 problematic if using video cards and other memory-heavy devices.
227 2) If > 64MB of memory space is required, the IXP4xx can be
228 configured to use indirect registers to access the whole PCI
229 memory space. This currently allows for up to 1 GB (0x10000000
230 to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
231 is that every PCI access requires three local register accesses
232 plus a spinlock, but in some cases the performance hit is
233 acceptable. In addition, you cannot mmap() PCI devices in this
234 case due to the indirect nature of the PCI window.
236 By default, the direct method is used. Choose this option if you
237 need to use the indirect method instead. If you don't know
238 what you need, leave this option unselected.